Printer epson tmu 220 jobs
I want someone to convert this image to 3D. To print it on a 3D printer . (Pot size 2 liter) file .stl
Looking for Android expert who can help me build android app which can capture print request and print data from any app in the phone.
Hello, We are looking for a magazine/graphic designer and printer to design the Trendmagazine for a big outdoor and sport event award. The magazine will contain: • images: portraits, event, and apparel shots and some illustrations that accompany the text • text: interviews, explanatory text, product descriptions. The dimensions of the magazines are not fixed yet and can be discussed. The magazine will be approximately 150 pages and 100 printed copies are needed. Table of content: • Introduction • Description of the award • Jury presentation • Category presentation • Judging criteria • Winning products The pictures and texts will be final and shared with you on the 28th of October. The printing of the magazine needs to be done on the...
For more than a thousand years The Ancient Tree of Wisdom has stood in the middle of the darkest of forests, The people of the lands migrate to its base to ask for enlightenment. With the simple drop of a dice into the top canopy the tree of wisdom spots out the answer. Standing approximately 200-220 mm high And 170 mm wide Description old, gnarled, twisted, Covered with vines, fungus and moss. It’s large root structure twisted and revealed with pockets of grass or dead leaves. Hollow centre to receive and expels a standard d20 dice. Split int Three parts for easy 3D printing without supports.
Zebra Printer Expert Needed for Management/Software and printer settings setup. Have a warehouse with multiple Zebra Printers that need managed, setup correctly, etc. We did connect them all to a "network" in order to be linked to Zebra software. Must be willing to cowork via Zoom. We have 2 facilities, 1 facility needs 2 printers but at this time no hardwired internet and would need wireless Zebra Printers setup. Other facility has about 12-15 or so Zebra printers. Must be able to work via Zoom Screenshare Cowork.
I want to add a white outline and use that outer profile to cut on my printer, leaving a thin white border around this shape.
Encoder Reading, sensor action, motor functions only for people with knowledge printers flat bed otherwise they will be excluded, it means waste of time!!!!
Seeking a SKILLED graphic designer/illustrator to follow specific directions in augmenting an existing logo which will eventually be used in...designer/illustrator to follow specific directions in augmenting an existing logo which will eventually be used in a screenprinting context. I'd like to be involved with check-ins throughout, ideally today. Deliverables include high resolution files (300 dpi or higher) of the final logo, as well as individual files separated by colour (two colours used total). Size 15"x21". Working files needed in case the printer needs to adjust later. Preferred formats for layer preparation: PSD, PDF, AI, JPEG or EPS. I have very clear guidelines. Project could be completed very quickly. Need someone who communicates really well in English an...
Looking for Java and Flutter developer to add print function to android app, to use this app on android POS device machine (bult in printer in the device-photo attached). SDK (Java) for the android device is available. Please be noted that that app is Flutter and the SDK for the device is in Java. Thanks
I will pay $100 if someone can take 16 jpeg files and create 1 file (pdf) for me to take to the printer to have 8 double sided cards printed. I need it done with the hour.
...it’s been cost prohibitive. I´d like to help them and help others at the same time by keeping the improved system open source for anyone in the world to be able to benefit from and be able to continue improving upon as well. Some of the features other than the basics of any POS system (including being available in Spanish): 1. Can be used with any computer, cell phone or tablet and with any printer. 2. Can be used with multiple input points such as a computer at the cashier, a tablet at the kitchen, a tablet at the bar, a cell phone of a waiter, etc. 3. Can be used by clients for direct ordering also, allowing them to make orders themselves from their restaurant table, from their hotel room, from the beach, etc. 4. The same system can give different access levels to...
3d model for an outdoor speaker housing need to make this to house a 4" speaker so I can print them on my 3d printer
I need a js script in Retool that can allow us to print some reports to a ESC/POS printer
My nonprofit produces 3 print newsletters each year. I write the copy and need someone to put in illustrator to be sent to printer.
...enough participants, they can: edit the book via our services create an ebookcreate an animated powerpoint with musicassociate a QR code (to be placed on a tombstone)Today the site is in no code / low code and the creation is not automated. We want to redesign the site to have a site developed in the right standards and take advantage of it to automate the production of deliverables. We call on a printer to produce the books. We want to keep the SEO so we need a maximum development time of 3 months The design will have to be improved (UX design) as well as the graphic part while keeping the principle An admin space must be associated. The site will be in French with the possibility of switching to English A French-speaking service provider will be preferred. A first step consi...
I need to print a very specific type of document with a handheld thermal printer. The exact printer is listed below. This will be the first in a number of software updates I will need for an application. https://www.amazon.com/gp/product/B07XKQQKTG/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&th=1
Attached vector files, need to be converted into individual, size scalable Stl (3d resin printer ready files). The size of a 20cent piece would be the smallest, going up to challenge coin size and 8cm diameter. relief height of the labels is no more than 3mm at best, but the detail needs to be sharp. ASAP
I need to create a 3D printer file of a dog, specific one I have in mind, with some certain shape cavity hole inside the dog. I need the dog to be 18 inches or 45cm tall. I can provide details of the model to the winner of the project.
Hi, I intent to build a fake front to a circus big top tent using two sheets of plywood therefore 2.4m x 2.4m onto which I want to stick a vinyl print to it that looks similar to the attached images. Can you please assist with an image that I can give to a printer that then can produce a vinyl sticker 2.4m x 2.4m Kind Regards Carl
I just want an 3d STL package file made, I have a printer but I am still noob when it comes to creating from software and I am prepping for a convention coming up this late October
I just want an 3d STL package file made, I have a printer but I am still noob when it comes to creating from software and I am prepping for a convention coming up this late October
We are looking for a small software to print the QR codes and verify after printing on the label printer. 1. An Ascii text file will be provided with the QR codes. 2. QR codes file will be sent to a label printer, Datamax, Toshiba or Zebra to print them one by one. 3. Once the barcode will be printed, it will be scanned and verified with the proper contents. 4. Once the complete list will be printed, a report will be generated showing the successful QR printed and compared with the ASCII file completed. 5. Once the file comparison will be done, the results will be uploaded to an online folder automatically. If there is any question, it can be discussed with the successful candidates. Please quote us the price with the timeline, make sure you have some knowledge of working wi...
1. i need a python script auto run when folder1 get any pdf file 2. move this file into another folder after open this pdf and put digital signature print it to specific printer we have specify 3.I need executable and pythonnscript both for this. and when i create executable for this i have to specify the digital signature id and companyname which is the script made for
...role for admin and user - Admin should have the role over all the application include delete and creating user also . The application should include: 1- Login page for user and admin 2- Two button “archive & logs “ A- Archive should include: 1- Data entry form for access Microsoft that will contain information and documents “the document should be included in the form to scan it from the printer and store it in profile of the beneficiaries. 2- The form should be in string number consequence like 1, 2, 3,4 ,5 etc.… and saved the profile in the access data 3- The Data should be export and import through access Microsoft. 4- The document of each beneficiary should be printable through the pressing the profile and go to document and print it. 5- ...
I have some stl files that have been created for me and I need help slicing them so that they can be printed in a 3D printer. Sample is attached, but I will have others.
...altered. There are two logos, square and horizontal. You can use either of them. The logo should be on both sides. The content is informative, not sales-oriented, so the layout should make the content easy to read: simple font, moderate column width, etc. Finished product The finished product should be a single zip file containing ONLY the files needed by the printer, organized and formatted so it is ready for the printer to use without modification. What we're looking for We need a designer with *print* experience. We will need to see a variety of printed designs in your portfolio. Experience keeping tropical fish or koi fish is desirable. You must also understand how to work within the printing process and how to create files for printing. How to get th...
I need someone to design a shoe sole (the bottom part that goes on the floor) The idea is to fit some electric components in the sole like sensors and vibrators. My Printer Specification Are Build Volume: 40×40×40 cm (15.75″×15.75″×15.75″)Filament Diameter: 1.75 mmNozzle Diameter: 0.4 mm & 0.25 mmInfill Pattern: GyroidSupported Materials – PLA, PETG, ABS Supported Wall thickness – 0.8 mm for 0.4 mm nozzle & 0.4 mm for 0.25 mm nozzle. Assembly Tolerance – 0.2 mm Dimensional Accuracy – ±0.2 mm There will be some research needed as the existing 3D models of the electronic components might not be available on the internet so easily.
I am currently looking for a book editor. There are 20 chapters in my upcoming book. I have a new chapter written each week for review. I would like the editing to be of similar makeup to my previous book that is already written. So, I would require my editor to review my first book before working on my new one. My first book is not super lengthy. It is only 178 pages long. My upcomi...a book editor. There are 20 chapters in my upcoming book. I have a new chapter written each week for review. I would like the editing to be of similar makeup to my previous book that is already written. So, I would require my editor to review my first book before working on my new one. My first book is not super lengthy. It is only 178 pages long. My upcoming book is estimated to be no more than 220 p...
We want a 3D file which will be used to print on a 3D printer. File should be .stl or .obj Two images are uploaded which describe what is to be made. The high resolution image is for the detail and the shape, and the scanned image is with basic measurements and proportions. Please let me know if there are any questions.
It requirements of the app are as follows. 1. Should be able to read SMS based on the sender name/number and produce an electronic receipt on that app. 2. The sender names should be configurable on the settings. 3. The contents of the receipt should be extracted from the SMS. This should ...name/number and produce an electronic receipt on that app. 2. The sender names should be configurable on the settings. 3. The contents of the receipt should be extracted from the SMS. This should be configurable as well on the settings as the content may increase depending on the sender. 4. It should have an option to Add land change receipt logo. 5. Lastly it should be able to connect to a Bluetooth printer. 6. Basic info like SMS Date and time, location, App user ID should be part of the receip...
It requirements of the app are as follows. 1. Should be able to read SMS based on the sender name/number and produce an electronic receipt on that app. 2. The sender names should be configurable on the settings. 3. The contents of the receipt should be extracted from the SMS. This should ...name/number and produce an electronic receipt on that app. 2. The sender names should be configurable on the settings. 3. The contents of the receipt should be extracted from the SMS. This should be configurable as well on the settings as the content may increase depending on the sender. 4. It should have an option to Add land change receipt logo. 5. Lastly it should be able to connect to a Bluetooth printer. 6. Basic info like SMS Date and time, location, App user ID should be part of the receip...
We have a nice handout for our software but it needs some cleanup and design improvements before we take it to the printer. Needs to be in a high quality printer format (EPS) on delivery. Looking for someone who can do more than replicate what we have so please share your design suggestions to make this better.
...insert the Green one, than inside the Green one you will insert the Yellow one. 6. The colored objects that you will add does NOT have to me EXACTLY the same as the surface coloring, they will be simple APPROXIMATIONS of it. This makes the job very easy, it does not have to be exact, an approximate result ise good enough. 7. The end design aims to be 3D PRINTED ON A 4 HEAD FILAMENT BASED 3D PRINTER IN 4 DIFFERENT COLORED FILAMENTS. We have many such designs to be handled the same way, but we will go in steps: 1. Make the design change for one model (that is given in the files) 2. Check the model, to see if it is properly sectioned in 4 different colors 3. 3D print the model 4. Make necessary modifications 5. Continue with the next model (all model are of a similar shape) there...
Need car branding design for a real estate company that is printer ready. Branding to be on the attached vehicle, 2017 Toyota Etios Sedan, white in colur. I have attached our company logo. The design needs to include colour wrapping the vehicle in colours that complement our logo. Wording on the advert should be: Nelson Maja Principal Property Practitioner Cellphone number Email address Services Offered: - Property Sales - Rental Placememts - Property Valuation - Property Advisory
I need help setting up a template for: Perfect bound book setting 300 pages Smooth soft cover Paper option 150 - 200gr luster paper 11" x 8" book seize landscape Inkjet printer Template must have top and bottom a "film-strip" like 3 little spaces where I can drag and drop pictures into in the middle will be writing every 15th and 16th page must be bordered for a full page picture, every 10th page must be devided into 2 or 4 blocks for smaller photos Text font seize Text font
Create a 3d model (no color, for 3d printer) for a cat riding a dinosaur (according to an existing 2d image)
Create a 3d model (no color, for 3d printer) for a cat riding a dinosaur (according to an existing 2d image)
Need someone to create files for indy car design for resin printing
Looking for a graphic designer to design a template for a pop up tent, background wall for tent, flag banner, table cover. The products are being used for real estate marketing. We have a printer just need someone to come up with some mock ups. Attached are examples of what we need done. Colors and logos will be provided once hired.
Migration from Exchange 2010 SP3 (~220 mailboxes) (Windows server 2008 R2) to MS 365 (Business basic), plus upgrade Domain Controller (including AD, DHCP , DNS) from Windows 2008 R2 to Windows 2022 with installing WSUS and AzureAD Connect
I need a case to put computer connector in I will need to print id on a 3D printer
I need to capt...folder succefull parsed document will be printed to a printer and also saved to a folder the parsing will be done automatically by the application which will be referring to the saved invoice template trained much at startup any document should not be parsed twice using the invoice number captured it should detect and just output the copy of the invoice after succesfull extraction of data (xml/jason formats) the data shall be sent to a middleware in the same computer (via API integration) and if the middleware will give a data response (qr code link) the parser should pick the data response (qr code) and place it on a customisable location on the initial pdf file the parser will then save the final pdf file and also send it to printer so as to print a p...
Hi Kareem, how are you? I need a 3D file for the pipe in the image to print on a 3D printer. The measurements on the images are the only details I have as its from a friend. The side of the pipe in the image shows a unique curved, it can be a semi circle if it is not possible to make with given details.
I have an RF IDP CB board for a for a printer in it detects if the ribbon is official or not I have a lot of aftermarket women but they fail to work I have seen that it is possible to jump the PCB board to stop detecting If it is using official ribbon or not I am looking for a way tobypass officials ribbon
I am starting a new business. I need pottery molds designed to print on a 3D printer that can be used to make plaster molds for pots. The plaster molds will be used for slip casting clay pots.
Hello. everyone. If you have experience to configure the Node.js server and have experience on this error. Please let me know. Thanks. node:events:368 throw er; // Unhandled 'error' event ^ Error: read ECONNRESET at (node:internal/stream_base_commons:220:20) Emitted 'error' event on WebSocket instance at: at ClientRequest.<anonymous> (C:workGame-Bundle-Backendnode_moduleswslib:10) at (node:events:390:28) at (node:_http_client:447:9) at (node:events:390:28) at emitErrorNT (node:internal/streams/destroy:157:8) at emitErrorCloseNT (node:internal/streams/destroy:122:3) at processTicksAndRejections (node:internal/process/task_queues:83:21) { errno:
Hello. everyone. If you have experience to configure the Node.js server and have experience on this error. Please let me know. Thanks. node:events:368 throw er; // Unhandled 'error' event ^ Error: read ECONNRESET at (node:internal/stream_base_commons:220:20) Emitted 'error' event on WebSocket instance at: at ClientRequest.<anonymous> (C:workGame-Bundle-Backendnode_moduleswslib:10) at (node:events:390:28) at (node:_http_client:447:9) at (node:events:390:28) at emitErrorNT (node:internal/streams/destroy:157:8) at emitErrorCloseNT (node:internal/streams/destroy:122:3) at processTicksAndRejections (node:internal/process/task_queues:83:21) { errno:
Artechtrading is an IT company, services such as creating website, computer and printer repairing, selling products via online, all these are done through E-commerce website. We need a logo designed based on the above informations.
