AutoCAD Jobs

I'm seeking an experienced project engineer for a construction project. The primary responsibility will be project planning and scheduling using Microsoft Project and AutoCAD. Key Responsibilities: - Develop and manage project plans/schedules. - Collaborate with stakeholders to ensure project alignment. - Utilize Microsoft Project and AutoCAD for planning tasks. Ideal Skills and Experience: - Proven experience in construction project planning. - Proficiency in Microsoft Project and AutoCAD. - Strong organizational and communication skills. Looking forward to your expertise!

I’m developing a small timber-framed house and I want the structural system built natively in Revit, not imported from another platform. The model has to go beyond basic framing: every stud, beam, joist, plate, truss and their hardware connections must be present so that I can take it straight into structural analysis and shop-drawing production without re-work. Scope • Create a single Revit model (.rvt) that contains all timber structural elements with fully modelled connections, levels, and grids already coordinated. • Name and organise families, types and views logically so schedules generate cleanly. • Provide clear, clash-free geometry that allows section cuts anywhere in the building. Deliverables 1. Revit 2024 (or later) project file with detailed ti...

I have to redesign the interior and exterior of a single story office building. INTERIOR The interior has to be redistributed, creating more office spaces. The building has two wings, Left Wing and Right Wing. It has to be a modern design. Furniture, desks, etc has to be renovated. Renovate bathrooms. Tech on the meetings rooms (25 people left wing, 50 people right wing) Left wing is for managers, so it has to be more executive. Right wing for engineers and analysts. Place/Room to keep old files organize. EXTERIOR Renovate building facade to a modern design. Landscaping. In the back of the building there is an entrance and parking lots for managers, it should have a covered parking lot (roof) with modern design. Mechanical workshop in the parking lot area. I need: PLANS • Surve...

I have an existing education building that I want to repurpose into modern staff housing. The goal is to create more than 40 comfortable units and suites while incorporating three shared amenities—a full-service communal kitchen, dedicated laundry facilities, and a compact yet well-equipped fitness center. What I need from you is a complete architectural redesign package that shows how the current classrooms, corridors, and service areas can be re-planned into self-contained rooms with ensuite baths, efficient circulation, and code-compliant fire exits. Concept sketches are useful for early discussions, but I will ultimately require scaled floor plans, reflected ceiling plans, basic MEP coordination notes, and exterior elevation studies that demonstrate any façade adjustments...

I'm seeking an experienced architect or designer to create an elevation for a modern-style commercial building. The exterior should prominently feature glass, concrete, and metal. The building has 5 floors and a basement. The ground and the first floor are showrooms and the top three floors are a hotel. Key requirements: - Modern architectural style - Use of glass, concrete, and metal Ideal candidates will have: - Proven portfolio in modern commercial designs - Expertise with selected materials Please provide your portfolio with your bid.

I’m Pramod Rajput, a civil engineer preparing a new residential project and I need a skilled designer to turn my concept sketches and technical notes into a full, build-ready package. The scope centres exclusively on Building Design for a single-family residence, so every drawing and model you create should be geared toward comfortable living spaces, efficient structural detailing and code compliance. My role will be to supply site dimensions, initial layout ideas and the local regulations we must respect; your role is to refine those inputs into: • Architectural floor plans, elevations and sections • Structural framing details coordinated with the architectural set • A simple 3D model (any mainstream BIM or CAD platform works—AutoCAD, Revit, ArchiCAD, ...

I need a full-scale General Arrangement drawing for a new aqueous + solvent herbal-extract facility built around three 3 KL extractors. I will provide the complete machine list, land dimensions, and a walk-through video of the site; your task is to translate that information into a clear, export-ready layout that satisfies CGMP requirements. Process knowledge of herbal extract manufacturing company is required. The drawing must show: • Precise machine positioning, walkways, and service clearances • All plumbing and electrical points sized and routed to suit the process flow • Built-in safety and compliance features—fire exits, solvent handling zones, and any required segregation—so we can pass both domestic and overseas audits Deliverables are a to-scale G...

I need a clean set of shop drawings built directly from an ACAD file and issued on my title block. I will provide the CTB so plotting matches our office standards. The scope centres on detailed wall and framing layouts, not just a basic structural outline. Every load-bearing wall, beam, column and connection must be fully called out, complete with Simpson C-CF connectors and the fire-rating notes that appear in the source PDF. Dimensioning, member tags, connector schedules and all required call-outs should read clearly once plotted. Deliverables in 24hours • ACAD model source files (depending on your choice) • Sheet-size PDFs for four floor plans and four elevations on my title block • DWGs of the same sheets, plotted through the supplied CTB BOM for each sheet...

I need a precise 3D model of a small mechanical part that will serve as a direct replacement for a worn-out component. I no longer have the original piece, but I can supply clear sketches and rough dimensional drawings. From those sketches you’ll create a production-ready CAD model, make it watertight for 3D printing, and generate tool-paths so I can cut the same geometry on my CNC mill. Here’s what I’m expecting: • A fully parametric CAD file (STEP or SolidWorks) reflecting the dimensions in my sketches. • An error-free STL optimised for FDM printing, with tolerances dialled in for a nice slip-fit once printed in PETG. • CAM output (Fusion 360 preferred, but Mastercam or similar is fine) with tool selection, feeds, speeds and roughing/finishing strat...

I need a skilled AutoCAD drafter to create and integrate 2D civil engineering plans. The plans need to be integrated with existing AutoCAD drawings. Key Requirements: - Proficient in AutoCAD 2D drafting - Experience with civil engineering plans - Ability to integrate with other AutoCAD drawings - Detail-oriented and accurate Ideal Skills & Experience: - Background in civil engineering - Previous AutoCAD drafting work - Strong attention to detail - Ability to meet deadlines

أنا على وشك إعادة تنظيم مساحة داخلية وأريد حلاً تصميمياً متكاملاً يعكس ذوقاً معاصراً ويستفيد من المساحة بأفضل شكل ممكن. أوضح-لك أن نطاق العمل يقتصر على التصميم الداخلي؛ لا توجد حاجة حالياً لأي معالجة خارجية. أحتاج إلى تصور شامل يبدأ من الفكرة وينتهي برسومات تنفيذية جاهزة للتطبيق. يسهل علي تسليم الملفات للمقاول فور اعتمادها، لذلك أفضّل أن تأتي المخرجات بصيغ CAD وملفات ثلاثية الأبعاد قابلة للتعديل (AutoCAD أو Revit مع رندرات عالية الدقة عبر 3ds Max / V-Ray أو SketchUp / Lumion). للتنظيم، أتوقع: • مخطط توزيع الأثاث والإضاءة مع مقاسات دقيقة. • لوحة ألوان وخامات تتضمن بدائل عملية ومتوفرة محلياً. • رندرات فوتورية تُظهر أهم الزوايا والمنظور العام. • ملف تفصيلي للتشطيبات والتوثيق الفني. أرحّب بطرحك لأفكار مبتكرة مع هامش للتعديل على مرحلتين قبل الإقفال النهائي. ...

I have a new home under construction and I want a complete lighting scheme drawn up before the electrician starts running cable. The brief covers every layer of light—ambient, task and accent—so the plan should feel cohesive from room to room while still letting each space shine on its own. Scope of rooms • Living room: the main goal here is ambiance. I’d like dimmable circuits, layered light, and ideas for accenting art niches. • Kitchen: bright, functional task lighting over worktops plus a softer option for evenings. • Bedrooms: warm, restful tones with reading spots accounted for. • Outdoor areas: safety first, but I still want the landscape and façade to look welcoming after dark. What I expect from you • Scaled layout drawings (PDF ...

I want to remove the repetitive drafting work from our AT-PAC ring-lock scaffold layouts. I already have a full library of blocks for this system (similar to the ones we used on Projects 1 and 2) and now need a script that can place and size those blocks automatically. Here is what matters: • Inputs. When I launch the routine I will feed in every dimensional variable that appears in the user manual—bay length, bay width, ledger heights, vertical rises, and any connection detail that affects component selection. • Logic. The code must read those values, pick the matching block, stretch or swap it where required, and then assemble a clean 2D plan and elevation. • Output. A finished drawing on our standard title-block, layers and linetypes intact, ready for immediat...

I'm seeking an experienced ocean engineer to evaluate a product's structural integrity. The product is designed for open ocean use and is made from metal alloys. Key requirements: - Assess structural integrity under open ocean conditions - Expertise in metal alloys and ocean engineering - Provide detailed evaluation report Ideal skills and experience: - Advanced knowledge of structural analysis - Experience with oceanic environmental factors - Background in metallurgy and metal alloys Looking for a comprehensive and professional evaluation. Please share your relevant experience and approach.

I need a modern-style G1 structure house on a rectangular plot measuring 0.025 acres, with the front side being approximately 24 ft and the back side 45 ft. The ground floor should include a living room, kitchen, and two bedrooms with a bathroom. Key Requirements: - Strong foundation for future expansion - Modern architectural design - Layout: Living room and kitchen, two bedrooms and a bathroom Ideal Skills and Experience: - Experience in G1 residential construction - Strong background in modern architecture - Ability to design for future expansion

I’m looking for a precise, build-ready floor plan drafted in AutoCAD for a residential home that will ultimately include three to four bedrooms. I’ll supply the rough sketches, preferred room sizes, and a short wishlist as soon as we start; your role is to translate that information into a clean, well-layered DWG that can also be issued as a print-ready PDF. The core layout must cover bedrooms, living-dining area, kitchen, and the usual wet areas, and I’d like you to leave enough flexibility in the layout to accommodate an optional study or gym later on if space allows. Accurate dimensions, logical layer naming, and clear door/window schedules are essential so the file slots straight into an architect or builder’s workflow. Deliverables • Native AutoCAD...

I need detailed and accurate elevation, and floor plans for a planning consultancy to use in planning applications. These plans must be compliant with local authority requirements. Requirements: - Elevation Plans - Floor Plans Examples: basic outbuildings, agricultural buildings and stables. Final deliverables should be provided in PDF, DWG, and JPG/PNG formats. I have existing paper documents that need to be referenced, so experience with digitizing and incorporating paper materials is a plus. Ideal Skills and Experience: - Proficiency in CAD software - Experience with local authority planning requirements - Attention to detail and accuracy - Ability to work with and reference existing paper documents

Project Title: 9,000 SQFT Mixed-Use Pole Barn Project Description I am seeking a qualified engineer to provide structural and mechanical plans for a 150' x 60' (9,000 sq. ft.) post-frame building on a concrete slab. This is a multi-functional building featuring warehouse storage, professional office space, and individual flex-warehouse rental units. Architectural Layout & Scope The building is divided into two primary zones: 1. Two-Story Warehouse & Office Wing (60' x 70' Section) First Floor: Open warehouse storage with one bathroom. Heating: Ceiling-mounted gas unit heater. Second Floor (Loft): 30' x 30' interior second story for professional offices and one bathroom. HVAC: Requires a full, dedicated HVAC system (Heating/Cooling). 2. Flex-Storage Ren...

I’m preparing a Building Regulations application for a small-scale sewerage treatment plant here in the UK and now need two accurate CAD drawings to submit with the paperwork. The requirement is intentionally simple—just a Basic layout—yet it still has to meet the 1:1250 and 1:500 Ordnance Survey presentation standards that local authorities expect. Because I don’t have any existing site plans, you’ll be starting from scratch. I can provide the address, rough GPS coordinates, and any photographs you need, but the underlying mapping must be produced or sourced by you. The 1:1250 location plan should clearly outline the overall property boundary and show surrounding roads or landmarks for reference. The 1:500 block plan then zooms in on the plot, marking the ex...

I'm looking for a skilled CAD jewelry designer to create a unique choker necklace. Project Requirements: - Design a choker-style necklace - Focus on creativity and detail - Experience with CAD software is essential Ideal Skills and Experience: - Proficiency in CAD design for jewelry - Strong understanding of choker necklace styles - Previous experience in high-quality jewelry design Please share your portfolio with relevant work.

You will take my existing 2D drawings and 3D models and turn them into fully detailed, manufacturing-ready parts inside Tekla. All dimensions, material specifications, weld symbols, bolt lists, and any machining notes must be captured accurately so the shop floor can fabricate without further clarification. What I will provide • Both 2D drawings (PDF/DWG) and 3D reference models. • Project standards for layers, naming, and material grades. What I need back • A clean Tekla model reflecting all parts and assemblies. • Shop drawings for every part and sub-assembly. • NC/DXF files where applicable. • A compiled BOM exported directly from Tekla. Acceptance criteria • All parts match the source geometry within ±0.5 mm. • No missin...

We are seeking an experienced architect to prepare a complete architectural plan based on an existing reference layout for a North-East facing, Vastu-compliant residential house to be constructed on a Vidisha plot located within a 4-acre farmland. The proposed house should have an overall carpet area of approximately 1600 sq. ft., excluding open-to-sky courtyard spaces. A key design concept is an open-to-sky courtyard adjacent to the living room, promoting abundant natural light, cross-ventilation, and a strong indoor–outdoor relationship. The design must be highly functional, space-efficient, and structurally simple to keep construction costs under control, with the local turnkey construction cost benchmark of approximately ₹1,650 per sq. ft. treated as an important planning conside...

I’m finalising the tender package for a high-rise tower and need a complete MEP quantity survey that rolls straight into a bill of quantities. The scope must cover every Mechanical, Electrical, Plumbing, and Firefighting element shown on the latest IFC drawings and specifications. You will receive the full drawing set (PDF and DWG), schematic schedules, and any design narratives already issued. From those, I need an accurate take-off for pipework, ducting, cabling, containment, equipment, fittings, supports, and all associated accessories—no allowances, only measured quantities referenced back to the drawing or detail you took them from. Deliverables • An editable Excel BOQ, clearly split by system (Mechanical, Electrical, Plumbing, Firefighting), specification sec...

I'm seeking a skilled house planner to design a small open concept granny flat, around 50 square meters. Requirements: - One bedroom - Integrated living area, kitchen, and bathroom - Open concept layout Ideal Skills and Experience: - Expertise in space-efficient design - Experience with small house plans - Strong understanding of open concept layouts Please provide samples of your previous work and a timeline for completion.

I am wrapping up HCIS Stage 2 for a new chemical storage warehouse and now need complete detail design and installation drawings for the fire-suppression system. Everything must comply fully with NFPA guidelines; this is the single non-negotiable requirement. The exact suppression technology is still open. Whether a conventional wet sprinkler layout, a foam-water combination, clean-agent gas, or another approach ends up being the safest choice, it has to be selected strictly “as per NFPA requirements” after you review the chemical inventory and hazard classification for the building. In short, I’m looking for an engineer who can interpret the NFPA chapters that govern chemical warehouses, translate them into a compliant system concept, and then develop all the drawings...

I am an Australian architect working on residential projects, including renovations and new builds. I model in Rhino and produce AutoCAD drawings. I am looking for a freelancer to help produce a working drawing set from my Rhino model and AutoCAD template. This is a paid test job, with the possibility of ongoing work for the right candidate. For this test job, the scope of work is to extract information from my Rhino model and AutoCAD floor plans and produce a set of working drawings including a floor plan with dimensions, elevations, and a roof plan. The drawings must maintain exact formatting, layers, line weights, and naming conventions from my template so they can be easily edited by me. No design changes or interpretation are required — the goal is to reproduce and format the ...

I need detailed layout plans for a residential plot. The plans should be comprehensive and to scale. Ideal skills and experience: - Proficiency in architectural design software (e.g., AutoCAD, SketchUp) - Experience with residential layout design - Attention to detail and accuracy - Ability to create scalable and clear layout plans

I’m preparing a residential-use modular building that will sit on a steel frame supported by concrete blocks, and I need a complete concrete tie-down design package that satisfies current U.S. building-code requirements. The scope covers: • Calculating the forces transferred from the steel frame to the blocks and sizing all anchors, straps, or hold-downs accordingly. • Producing stamped structural drawings (PDF and CAD) that my installer can follow without further clarification. • Supplying concise calculation sheets showing load paths, safety factors, and code references. Please base your work on the typical wind and gravity load combinations for residential projects; if you need location-specific data, I will provide it once we begin. I’m ready to move qu...

I'm looking for an experienced 3D designer to create medium-detail models for manufacturing purposes. Requirements: - Expertise in product modeling - Experience in creating 3D models for manufacturing - Ability to deliver medium-detail models Ideal Skills: - Proficiency in 3D modeling software (e.g., SolidWorks, Blender, AutoCAD) - Strong understanding of manufacturing processes - Attention to detail and accuracy Please provide a portfolio showcasing relevant work.

I’m looking for rapid, system-level input on a commercial metal-clad facade that already has a concept panel worked out. I need that panel translated into fully detailed, India-compliant facade drawings, with particular attention to local tolerances, available profiles, wind-load norms and fastener specs so we can release it straight to fabrication. Alongside the drawings, I want a clear written logic for how each module mounts, aligns and can be swapped out later without dismantling adjacent areas. Think step-by-step fixing sequences, bracket schedules and any clever allowances for movement or future access. Finally, before we lock anything in, I need a quick but thorough sanity check of the structural interface: confirm the loads back to the main frame, flag any mismatch in ancho...

I have a complete set of laser-scanning point-cloud files and now need a clean 2D survey drawing in AutoCAD. The drawing only has to capture the basic outlines of all visible topographical features and building footprints—no full labeling or heavy annotation, just clear, georeferenced linework that I can drop straight into my existing CAD workflow. You’ll start from the supplied point cloud (LAS format) and extract the required geometry, organising it onto sensible layers so I can switch terrain and building information on or off as needed. Please keep the file size lean and ensure the origin and scale remain intact from the scan. Deliverable: a single, tidy DWG that opens in vanilla AutoCAD 2020 without missing references or proxy objects. If you have questions about ...

I run an 18-seat café that is already in full operation and have just acquired the adjoining shop(260 Sq Ft). I now need an architectural design package that lets me break through, extend our dining room and enlarge the kitchen in one coordinated build, while keeping day-to-day service disruptions and damage to the existing fit-out to an absolute minimum. Scope of work • Re-plan the combined floor plate so the new and old zones read as one cohesive, minimal-modern space. • Give equal weight to extra covers and a better-equipped back-of-house; flow for staff and customers must feel natural from the first sketch. • Install a cart in the outer which adjoins the new kitchen preferably. • Prioritise comfortable seating layouts, generous natural light paths and ...

There is already an floor plan, if i have changes what kind of the floor plan i can get in that size. I need a full set of architectural drawings for a modern, three-bedroom home. The layout should feel open and light, with clean lines and an efficient use of space that balances privacy for the bedrooms with generous, flowing shared areas. Please base the concept on typical suburban lots and assume standard local codes; if you have suggestions to maximise natural light, energy efficiency, or indoor-outdoor connection, I’m eager to hear them. Deliverables I expect: • Scaled floor plan(s) with room dimensions • Elevations and at least one section • A simple 3-D visual or rendering that communicates the massing and facade treatment • Source files (e.g., ...

Generic site scaled drawings, revisions and final set-out planning in sketchup (.skp) for an outdoor music festival layout (larger sites require Main Stage, Second Stage layout). Max capacity for each location attached to brief as separate file. All drawings should be created from scratch using satellite imagery, drone aerial topography and standard dimensions. Site plans to include: Stage positions Amenities (permanent and portable) Existing Infrastructure Temp Marquee Infrastructure Services overlay Food and Beverage vendors First Aid External agencies (QPS - located next to entry, QAS - located with easy ambulance access) Merchandise Production BOH Bone yard storage Entry Exit points Fence lines Emergency access locations Exclusion zones Portable drinking water facilities (permanent an...

Title: Create Architectural Concept Mock‑Up from Existing “Bank in a Box” PDF Drawings Project Description: Traditional Credit Union (TCU) is seeking an experienced architect, architectural draftsperson, or 3D visualisation specialist to turn our existing PDF technical drawings into a polished, realistic 3D concept mock‑up of our “Bank in a Box” modular banking unit. it is a bank in a container that will be deployed permanently to remote aboriginal communities, creating local employment and providing essential banking services to remote aboriginal communities. We already have a full set of dimensioned container‑based design plans in PDF format (floor plan, elevations, internal layout, sections). We now require someone to convert that information into: A high‑qualit...

I need a full-scale General Arrangement drawing for a new aqueous + solvent herbal-extract facility built around three 3 KL extractors. I will provide the complete machine list, land dimensions, and a walk-through video of the site; your task is to translate that information into a clear, export-ready layout that satisfies CGMP requirements. Process knowledge of herbal extract manufacturing plant is required. The drawing must show: • Precise machine positioning, walkways, and service clearances • All plumbing and electrical points sized and routed to suit the process flow • Built-in safety and compliance features—fire exits, solvent handling zones, and any required segregation—so we can pass both domestic and overseas audits Deliverables are a to-scale GA ...

I’m ready to transform my entire back yard into a more practical, family-friendly space and need a contractor who can take the project from demolition through final finishes. Scope of work • Pour new concrete pads on both sides of the existing patio (where the heaters sit now). These pads will become twin BBQ stations and I want each one protected by a pergola so the area can stay open-air but shaded. • Form and pour a clean concrete surround for the pool pump, then build a neat insulated-panel cover that keeps the equipment out of sight yet well-ventilated. • Build stone stairs that run from the main yard level down to the rear fence line, matching the style of the rest of the hardscape. • Excavate and install a retaining wall along the back boundary to ...

Licensed Architect for IBC/IEBC Code Compliance Narrative - Everett WA Dog Park Permit (B2503-071) PROJECT OVERVIEW Commercial dog park build in Everett, WA (98201) has stalled at the 5th city review round due to incomplete code narrative and insufficient Level 1/Level 2 alteration analysis under IBC/IEBC 2021. Current architectural set and all city reviewer comments are available for immediate review. Current Issue/Pain Point: Previous architect rushed the submission, failed to provide proper code justification, and didn't adequately debate Level 1 vs Level 2 work scope with the city. What I need: A licensed architect (Washington State stamp strongly preferred) to develop a code-compliant response narrative that satisfies the building inspector and keeps our schedule intact. REQ...

Scaled Layouts (Draughtsman‑Ready) Project: Detached Outbuilding / Games Room Address: 11 Cliff Lane, Lincoln Authority: North Kesteven District Council --- Overview Layouts prepared at recognised planning scales for LDC and Building Control. Fully dimensioned and suitable for direct CAD tracing. --- D01 – Floor Plan (1:50) Overall size: 6000 × 3500 mm Wall build‑up: 102.5 mm brick / 100 mm insulated cavity / 100 mm fibolite block (≈302.5 mm total) Openings: Front (6.0 m): 3000 mm double UPVC doors, centred Side (3.5 m): 900 mm single door, centred Approx. internal clear size: 5395 × 2895 mm --- D02 – Elevations (1:50) Facing brick: Forterra Hampton Rural Blend UPVC frames: light grey Heights: Max overall height: 2500 mm Rear (low po...

I’m renovating my home and need clean, accurate Revit files for all new built-in joinery. The scope covers three zones—kitchen cabinetry, bedroom wardrobes, and several custom storage units—exactly as shown in my rough hand sketches and notes. What I will supply • PDF scans of the sketches with dimensions and general layout references • A written scope clarifying each unit’s overall size, door/drawer count, and any special features What I need back • A single Revit (.rvt) model or linked families representing each piece • Correct overall dimensions and layout so I can drop the elements straight into my renovation model • Basic parametric controls (height, width, depth) are a plus but not mandatory No deep construction details, h...

This residential property in Hawaii needs a cohesive concept for a new pool area that feels unmistakably island-authentic while remaining easy to maintain. I have the pool’s footprint confirmed; what’s missing is everything that surrounds it. The scope focuses on three integrated features: a comfortable seating zone for small gatherings, verdant yet climate-appropriate planting that frames the water, and layered outdoor lighting that lets the space stay lively and safe after sunset. I want a licensed or highly experienced landscape architect who already understands Hawai‘i’s permitting nuances, salt-tolerant species, and coastal micro-climates. Native or adaptive plants should dominate the palette, and any hardscape recommendations must withstand intense sun, moist...

I’m ready to move from ideas to polished plans for a modern home that fits three to four key rooms: comfortable bedrooms, well-appointed bathrooms, and a dedicated home office. I already have a general footprint in mind, but I need a seasoned residential designer or architect to translate it into professional drawings and striking 3D visuals that reflect clean, contemporary lines, smart space flow, and plenty of natural light. Here’s what I’d like to come away with: • Scaled schematic and detailed floor plans (PDF + editable CAD) • High-quality exterior and interior 3D renderings showcasing finishes, colors, and lighting • A basic materials / finishes legend so I can price options locally • One revision round after the first full draft to fine...

I need a complete electrical drawing package for a PLC-based control panel whose sole function will be automating machinery on our production floor. The layout must include all power and signal wiring, component placement, terminal numbering, and clearly labelled field I/O so our installation crew can build and commission the cabinet with zero guesswork. Please create: • A schematic set in AutoCAD (or EPLAN if you prefer) that covers incoming power, PLC rack, I/O cards, relays, breakers and safety devices • A front-view panel layout showing DIN-rail spacing, wireways and device tagging • A concise bill of materials with manufacturer part numbers All drawings should follow IEC standards, use my provided title block, and arrive as both native CAD files and PDFs. I&rs...

I need my existing two-storey duplex plan revised for a Canadian building-permit submission. All work has to satisfy the National Building Code of Canada, so please be comfortable detailing to NBC requirements and provincial amendments. The most critical structural adjustments are three-fold: converting the current hip roof to a 6/12-pitch gable while keeping the new profile in harmony with the home’s present style, swapping every steel beam for properly sized LVL members, and introducing below-grade basement doors on both sides complete with the extra footings those openings demand. Alongside that, floor framing must shift to conventional 2 × 10 dimensional lumber (no engineered joists) and the roof vents need to become a continuous ridge vent. On the street façade I&r...

I need a full batch of 80–100 basic architectural plans for modern single-family homes. Each plan should stand on its own as a buildable concept while remaining straightforward enough for quick review and adaptation. Scope of work • Produce 80–100 individual plan sets featuring modern styling—clean lines, flat or low-pitched roofs, simple forms, and an emphasis on functional layouts. • Limit the complexity: I want practical, code-compliant concepts rather than highly customized showpieces. Required content per plan • Dimensioned floor plan (ground level; add 1 upper level). • Four exterior elevations with minimal detailing. • Basic door, window, and finish schedules. • Files delivered both in editable CAD (DWG or RVT) and print-ready ...

I already have a residential floor plan drafted and need a qualified structural engineer to step in now. Your task is to analyse the drawing, respect my preference for an open-floor arrangement, and determine the correct positions and sizes of all concrete columns and beams. Please review the architectural file, run the necessary load calculations, and return a mark-up (PDF or DWG) showing column/grid locations, beam spans, and member sizes. A concise calculation sheet that justifies the dimensions you choose is also required so my local permitting office can sign off without delay. Key points you should keep in mind: the structure is strictly concrete, no load-bearing walls are planned because I want the main living area to remain unobstructed, and any changes you suggest must stay with...

I'm seeking an experienced 3D designer to create mechanical assembly components. These parts will be used in assembly processes and should be designed for manufacturability and precision. Key Requirements: - Design mechanical parts that will be used as assembly components - Create 3D models suitable for plastic fabrication Ideal Skills & Experience: - Proficiency in CAD software (e.g., SolidWorks, AutoCAD) - Experience in designing for plastic manufacturing - Strong understanding of mechanical design principles - Attention to detail and precision in modeling Please provide a portfolio showcasing similar work.

I’m building out a forest-fire suppression solution for a network of small cabins and cottages and I need a reliable engineering partner who can stay with the project long term. Your main job is to translate my performance requirements into clear, build-ready plumbing schematics for the exterior of each structure. Scope of work • Design complete pipe runs in metal, sized and routed for outdoor exposure and high-pressure delivery. • Integrate three discharge options—roof-mounted sprinklers, perimeter foam heads, and directional water cannons—so the homeowner can select any or all without re-plumbing. • Provide workable, code-compliant layouts that a local plumber can follow without guesswork. Typical deliverables 1. CAD drawings (DWG or similar) sh...

I need a seasoned plumbing engineer to develop the full utility design for a new European-standard cleanroom pharmaceutical facility. The scope covers everything from purified water loops and drainage through to the specialised gas networks the process relies on. Two points are absolutely non-negotiable: • End-to-end layouts and schematics for nitrogen, argon and compressed-air lines, sized, pressure-rated and integrated with the main plant utilities. • Full compliance with GMP, EU annex 1 and any local cleanroom plumbing standards. Expect to coordinate closely with my architectural and HVAC teams so the pipework, valves and clean-in-place connections sit neatly inside the BIM model (Revit) and translate into clear isometrics for the installers. I will provide the current flo...

I have a 4,400 sq ft home underway in Georgia—2,200 sq ft on the main floor plus a 2,200 sq ft walk-out basement—and I need an architect who can translate my concept package into permit-ready drawings. The PowerPoint I will share outlines the exterior elevations, roof lines, room layouts and a concise list of key design considerations you must factor into your bid. Architectural design is the core skill for this assignment. Wood is the primary material I want expressed in the exterior detailing and any feature elements you highlight inside, so the design should showcase warm, organic finishes that fit our region and climate. What I expect from you • A detailed project proposal explaining your workflow, milestones and software (AutoCAD, Revit, ArchiCAD or equivalent)....