Neopixel ws2812 jobs

Necesito que desarrollen un software para mí. Me gustaría que este software sea desarrollado para Windows.

esp32 chip with 24 neopixel led,battery operated so needs charger and bms

...Details Proposals Files Tasks Share Create a soundboard similar to a proffie board with arduino code £20.00 – 250.00 GBP Hi. I'm looking at having my own soundboard manufactured, but first, i need the sounboard created. The soundboard will be used for lightsabers i currently sell. The board will need to run on aurdino code ( the code must be written by yourself ) and will need the following Neopixel LED Strip and LED Support. 44/22/11khz Audio. Touch Button Support. Multiple Blades And Effects With Different Presets For Each. Supports Both Monophonic and Polyphonic Sound Fonts Can Play Background Music With Other Sounds. Many Free Pins That Can Also Be Programmed For Other/Additional Features. Supports SmoothSwing! I would also like bluetooth support module...

I have a NEOPixel 1515 Led strip using only 9 leds and I want to initialize it in WHITE ONLY, doing a FADE repeatedly until the circuit is turned off. I also want on another pin a single LED, RED in color that will be initialized at the same time, and slow flash on & off like a warning light and remains on till circuit is turned off. This is connected to a Trinket MO AND AT 5V DC.

An order for the management software for 8 independent WS28xx channels + 4 switch control I am only asking for offers from people who have experience in this topic. Electronics microcontrollers esp32 ws2812 ws2813

I am looking for a custom sketch(s) to operate on an Adafruit Feather M0 Bluefruit board, running sketch will connect the Adafruit Feather to a SparkFun Touch Slider to control a NeoPixel strip. Touch Slider Controls (3 pads) - Center (on/of) - Slide (LED light intensity when turned on) Considerations - System will also be controlled via Bluetooth – 'Adafruit Bluefruit Connect' app on Android. - System will interact with other sketches, such as saved color presets.

Hello, I am looking for a custom sketch(s) to operate on an Adafruit Feather M0 Bluefruit board, running sketch will connect the Adafruit Feather to a SparkFun Touch Slider to control a NeoPixel strip. Touch Slider Controls (3 pads) - Center (on/of) - Slide (LED light intensity when turned on) Considerations - System will also be controlled via Bluetooth – 'Adafruit Bluefruit Connect' app on Android. - System will interact with other sketches, such as saved color presets.

Hi Muhammad, I am looking for a custom sketch(s) to operate on an Adafruit Feather M0 Bluefruit board, running sketch will connect the Adafruit Feather to a SparkFun Touch Slider to control a NeoPixel strip. Touch Slider Controls (3 pads) - Center (on/of) - Slide (LED light intensity when turned on) Considerations - System will also be controlled via Bluetooth – 'Adafruit Bluefruit Connect' app on Android. - System will interact with other sketches, such as saved color presets.

...having a NVIDIA Jetson Nano, a FLIR Lepton 2.5 or 3.5, a Pure Thermal 2 board, a Raspberry V2 Cam and a NeoPixel from Adafruit in order to work. An example of the GUI that I need can be found here: ( )( ). I just need to see the video feed of the two cameras feeds and the temperature information from the detected faces in a proper GUI and having the ability to control/modify the temperature value adding or resting values to simulate higher or lower temperature. (Like in the video), having a FEVER message when certain thresholds are met. When a threshold is met(temperature of 37.5 or more is detected) a neopixel LED(addressable LED strip) will change the color from Green to Red to indicate a detection of a person

Hi,I am looking for a person to carry out a Neopixel project. Independent control of 8 channels by ESP32 Solutions similar to SP108E, H803WF

Hi,I am looking for a person to carry out a Neopixel project. Independent control of 8 channels by ESP32 Solutions similar to SP108E, H803WF

Hi,I am looking for a person to carry out a Neopixel project. Independent control of 8 channels by ESP32 Solutions similar to SP108E, H803WF

Hi,I am looking for a person to carry out a Neopixel project. Independent control of 8 channels by ESP32 Solutions similar to SP108E, H803WF

Hi,I am looking for a person to carry out a Neopixel project. Independent control of 8 channels by ESP32 Solutions similar to SP108E, H803WF

Hi,I am looking for a person to carry out a Neopixel project. Independent control of 8 channels by ESP32 Solutions similar to SP108E, H803WF

Hi,I am looking for a person to carry out a Neopixel project. Independent control of 8 channels by ESP32 Solutions similar to SP108E, H803WF

Hi,I am looking for a person to carry out a Neopixel project. Independent control of 8 channels by ESP32 Solutions similar to SP108E, H803WF

Hi,I am looking for a person to carry out a Neopixel project. Independent control of 8 channels by ESP32 Solutions similar to SP108E, H803WF

.Hi,I am looking for a person to carry out a Neopixel project. Independent control of 8 channels by ESP32 Solutions similar to SP108E, H803WF

Hi,I am looking for a person to carry out a Neopixel project. Independent control of 8 channels by ESP32 Solutions similar to SP108E, H803WF

Effect required: Comet effect code for arduino <> @ 7.36 - It needs to go in only one direction. - I am using 3 strips with 45 LEDs on each. They need to have same pattern - Color has to start from RED and finish with Violet at the end of strip. (rainbow color with comet effect) Hope this makes sense to you.

need a esp 32 based PCB design, with neopixel LEDs

hi everbady i need two codes work. sevensegments will counter with three Display and binary counter and you have the code. elavetor code works but not in machin so i thing the problem with clk, Elavtor simulation work but not on the real machin. and last WS2812 LED WITH rapport i sent pic two. plzz not while,for loop in the codes. FAMS for the elavator. if it does not work i will not pay i need they in a week fram now but you can send me before to test them. oh vhdl not cerilog

...modes --> Mode change after each button input from 0 (all off) to 1, 2, 3, 4, 5 and starts again from the beginning. Code stays in mode as long as there is no new button input For each mode. It is required to have an easy to adjust set of parameters, for the following functions. .) LED1 WS2812 Continuous animation for a 10W RGB PowerDot (animation/light effect must run smoothly as long as mode is not changed --> Effect Brightness/Speed/Animations style must be easy to adjust in final code) .) LED2 WS2812 Continuous animation for a 60 pixel RGB ring (animation/light effect must run smoothly as long as mode is not changed --> Brightness/Speed/Animations style must be easy to adjust in final code) There is a 4 channel relay switch connected to the Arduino Set on/o...

...420 3. Sequential pattern for blood flow (red + blue) 3 segments - Adafruit Mini Skinny NeoPixel Digital RGB LED Strip - 144 LED/m - 1m WHITE PRODUCT ID: 2969 4. Take in Heart Rate at LIVE mode: 1 - Sparkfun pulse oximeter: MAX30101 biometric sensor and MAX32664 biometric hub 5. 2 are for pulsing pattern (red on left & blue on right) / 2 are yellow under the model for spotlight : 4 - Ultra Bright 3-Watt Chainable NeoPixel LED - WS2811 6. Speaker amplifier 1 - Stereo 20W Class D Audio Amplifier - MAX9744 PRODUCT

order for the implementation of a programmable LED controller (WS2812 ...) on the ESP12F controller Solutions similar to the SP108E and H803WF

This should be easy task for professional. I have 3 bit input to arduino, according to state of the input arduino should change color to RGB diode. For example if input is 010 RGB will emit blue color, when input is 011 RGB will emit green etc etc... Diode i would like to use is with build in WS2812 controller and its connected over i2C, There are already a lot of libraries out there. Please apply only if you can do this fast. When applying start your proposal with words "Engineering is awesome" Thank you

...is a personal project that i may in the future move to one including custom making of a circuit and box to sell, but only if it works well in my home. (may be further work later) The project. I need code to control an Arduino Mega 2560 board to receive DMX512 signals from an external source, using a MAX485 RS485 Transceiver Module. The Arduino will use these signals to control 4x Addresable WS2812 LEDs Strips There will be an attached LCD 2004 20*4 LCD 20X4 module + IIC/I2C to display multi layered menus to configure the Arduino. There will also be a temperature Probe Temperature Sensor 18B20 attached for temperature input. Using 5 buttons to scroll the menu, left right up down and a center one for enter DMX input. I wish to be able to adjust the starting DMX channel that the...

It s a project that us as...programming resource. Essentially, we plan to integrate a system of Neopixel strips to display in a chasing pattern. There are 4 main mode of operations: 1. When you turn the ON/OFF button, the LED strips turn on and run in a default DEMO mode:chasing pattern in a slow speed 2. WHen you press fast button, LED stripns run in a FAST mode: chasing pattern with fast speed 3. When you press LIVE button, the heartpulse sensor take over and the LED strips will run chasing pattern with the speed that match with heart rate (response to the sensor real time) 4. Press ON/OFF button again, the LED turn off I need help with perhaps connection, case testing, troubleshooting. etc. Need someone is skilled with Arduino or Raspberry Pi, Neopixel, organized and ...

...modes --> Mode change after each button input from 0 (all off) to 1, 2, 3, 4, 5 and starts again from the beginning. Code stays in mode as long as there is no new button input For each mode. It is required to have a easy to adjust set of parameters, for the following functions. .) LED1 WS2812 Continuous animation for a 10W RGB PowerDot (animation/light effect must run smoothly as long as mode is not changed --> Effect Brightness/Speed/Animations style must be easy to adjust in final code) .) LED2 WS2812 Continuous animation for a 60 pixel RGB ring (animation/light effect must run smoothly as long as mode is not changed --> Brightness/Speed/Animations style must be easy to adjust in final code) There is a 4 channel relay switch connected to the Arduino Set on/of...

The order for the implementation of a programmable LED controller (WS2812 ...) on the ESP12F controller Solutions similar to the SP108E and H803WF Assumptions: 7 independently controlled channels Managing Madrix or similar A motion sensor Light sensor Android application (m iOS optional)

HI, I need someone to create C++ code for my arduino Nano. I am trying to recreate the disney magic band reader, complete with RC522, JQ6500 voice module and addressable neopixels. I am basically looking for it to do what it does at the park. The video link is below. Its the first 30 seconds. I will be using 2 neopixel, one for the outside loop and inner mickey. But i would like it to look exactly like the video. I would also need to be able to modify the code for the magic band chips that are going to be read obviously. lol any questions i be more that happy to answer.

First version of Teensy 4.1 software. Must control 2 stepper motors via a4988 driver smoothly also drive 2 separate neopixel strips smoothly, the steppers must be homed with an opitcal limit switch

I need to be able to control 2 separate neopixel strings and stepper motors smoothly (using A4988 driver) at the same time. The stepper motors will also have optical limit switches. I need the electronics design, pcb and software (Arduino). I can provide more complete information if you are interested in the job.

I need to write a code for a NodeMCU to connect to Blynk. The components in the system are as following: 2 IR E18-D80NK (IRSensor_1 & IRSensor_2) 2 Relay Modules (PumpRelay_1 & Pump_Relay2) 1 Ws2812 x24 Neopixel compatible (Led) 1 Push Button 1 1.44" TFT SPI Display The IR and Relay works as an independent system. Whenever IRSensor_1 detects and objetc (Serial print: "Hand detected"), send a signal and activate PumpRelay_1 for 0.5 seconds (Serial print: "Activating hand sanitizer relay pump"). After that, dont send any signals to the Relay for 2 seconds and add +1 to the counter of the Relay (Serial print: "Hand sanitizer has been activated X amount of times"). Whenever IRSensor_2 detects and objetc (Serial print: "Foot detec...

I want to use 4 x WS2811 SOP8 LED driver chips to turn on/off up to 12 unspecified DC devices (typically LEDs, laser modules, etc). The WS2811 is only capable of sinking 18mA per output, and I would like to be able to control devices which require more - possibly using darlington arrays though I am open to suggestions. Note the WS2811 outpu...no super small components please). PCB size and component cost is going to be very important. The circuit should have 3 inputs at one end of the board (5V, Ground, WS2811 Data In) and 3 outputs at the other end (5V passthrough, Ground, WS2811 Data Out) via 2.54 pitch headers, similar to the image attached. This board will be placed inline with other WS2812 LED strips, so the power tracks need to be similar in amps capacity to standard WS281...

...needed) As you can see, the sketch is based on one button interface. Pushing the button will switch from on mode to the next. The program should run on a Arduino Uno and be able to control: 1 WS2812FX Module ( --> Including the functionality to divide string into segments --> This is not yet in the attached Sketch--> individual setting for each mode) 1 WS2812 Module ( --> Including the functionality to divide string into segments --> This is not yet in the attached Sketch --> individual setting for each mode) 1 PWM MOTOR (12V, 4-Pin PWM, max. 1300 RPM) --> Ability to set different % of RPM for each mode 2 different on/off devices (Individual Setup for each mode) 1 on/off device with interval function (eg. on

Design PCB layouts with KiCad, pcb for power source for rack backbone, hat board for small cpu with GPIO to control 6 relays, uart GPS, uart WS2812 5050 led ring, Lcd Screen with Touch

I would like to make an application for Android,iOS with RGB LED light effects Ws2812 Ws2811 ... on the ESP 12 controller

...warning. We need to improve the PCB for our sensor to make it cheaper to produce, so we have chosen to use Seeedstudio parts and guidelines. SCHEMATIC DESIGN We already have a PCB schematic for our sensor (attached in Eagle) which includes the ESP32, the ADXL355 accelerometer, a piezo buzzer, and Neopixel LED (ws2812b). We want you to take our existing schematic design and add some components: 1. Transistor from 5v input for power to buzzer ,making it louder 2. 10uF decouple capacitor for Neopixel (ws2812b) 3. Ethernet controller and terminal. Please use this design () as a guide. Use the included schematic design, but find similar components from the Open Parts Library (see below). We want you to make sure all the

I have code on esp32 and neopixel Ws2812 and This code works Fine on esp8266,but does not work on esp32. I have flickering on neopixel. I need change library (from adafruit to etc fastled).

I have some code, that I need re written, Written in C. The project is to make a mockup of status indicator pannel, with 8 LEDs. There are 8 functions or animations, each must be cycled by pressing a momentry switch. There is the code, I need to change the functions/animations to suit the functions I have annotated on the pictures.

Hello, I need a simple Python script to run on Raspberry Pi with Neopixels. Basically it is a alarm script I need with 3 alarm options. on each alarm if it is set I need to set neopixels to a color. NeoPixel will need to turn off so Alarms will need to timeout after a variable of time. So 3 Alarms would have 2 Options each. AlarmTime=hh:mm (time to run light on) Timeout=mm (number of mins for light to stay on unless next alarm comes first) I would run the script on boot of raspberry Pi and it would loop say every 5 seconds.

Development of firmware for an LED indicator lamp with CANOpen communications. Code has already been developed for controlling LEDs via a LP5036 IC. The goal of the current project is toreplace the LP5036 with strip of 60 WS2813. --Hardware-- - MCU is the STM32F042K6T7 (Can use NUCLEO-F042K6 for development) - LED IC is WS2813B (Can use WS2812 breakout/strip for development) - Interfaces are CAN bus at 1 Mb/s and UART at 15200 kb/s (Can use CAN board such as SN65HVD230 for development) --Project Mandatories-- - Project and MCU should be configured using STM32CubeMX - FreeRTOS should be used - Compiler should Keil-MDK - CANOpenNode should be used as the CANOpen stack - All variables should be mapped to the CANOpen object dictionary - Code development and configuration should be doc...

Arduino Mega 2560 for Enchanted Rose Prop for Duaghters Play. The program was original written by someone else a few years ago to work with a Mega 2650 and Neopixel accent light 4 servo motors. it was original designed to use Beartooth BLE (No Longer available). Would like to have the software modified to eliminate the Bluetooth and use 6 Toggle Switch to 2 for the lights and 4 for the servo motors. For someone that know Arduino shouldn't be a big deal. For me it might as well be Mandarin. Code attached as well as Arduino Sketch

Thank you for your interest in my project. Esp based multisensor pcb design I'm looking to build a product, from electronics design and manufacturing. I'm looking for engineer who can lead this project and help me though the process. Requirements - Esp8266 - Micro usb power and programming - Cp2102 usb serial - Bme280 temperature humidity - i2c - Am312 motion - Bh1750 luminance - i2c - ws2812 RGB led - Reset button - 4x Mount holes - should be as small as possible - Pir on front - Rgb on front - Bme280 on top or side; good airflow for accurate measures - Bh1750 on top - Reset button on top - 5volt micro usb power on the back - Use open source available schematics when possible Deliverables: - all source files: schematic, gerber, BOM, coordinates, source files, etc - ad...

I need a board developed which will read a few sensors and communicate to other boards through a CAN bus. The sensors: Two piezos, and I will need a low pass filter with cut off frequency of 300Hz on each piezo. I need a digital potentiometer to me connected to each piezo in parallel to adjust the piezos sensitivity. Two contact switch triggers One touch sensor (aluminium foil) Require...rate on the MCU) Add STLInk v2 connection pinout so I can flash the firmware to the MCU Use a TRRS audio jack for the power and CAN Communication: 3V3 vcc, GND, CANH, CANL Provide a BOM with Element14 or Mouser's PNs Use Autodesk Eagle for the design of the PCB Add two holes for mounting the PCB Add pinout for serial communication (TTL) for debugging purposes Add pinout for connection to a Neopix...

Controlling WS2812 LED diodes from iPhone via WiFi. Overall simple functions, but may get slightly complex with some ideas we have for our like to have iOS & Android app to wirelessly access light settings and other functions.

The project is aimed at animating a flow chart diagram used as a teaching aid by teachers to teach a concept. In this case Industrial manufacture of Sulphuric acid using WS2812 rgb leds. The leds are embeded on top of a canvas (see Attached Image) so that the learners' attention is held by the moving(reacting) leds which change colour as per the expcted effect. A lot of ground work has already been done and programing of the animation using arduino nano. What I need is better,clean and less bulky code using Fastled because that's what am more comfortable in unlike Adafruit (see the code attached) See the video attached for an idea of how the code should run. I want to improve it further by adding a voice over as the animation run, incase the leaner wants to use it in th...

Hello, everyone. I am looking for someone who is experience in Addressable light ring Firmware. Details 1. NUM_LEDS: 36 2. LED TYPE: WS2812 3. The patterns of Addressable led light ring board have to be same as the video(mp4 file) I will send to you.(volume is 79.6M so I can't attach here. I am going to mail to you.) 4. Genuine Arduino Uno I attach the Arduino Library and youtube that is what I consider it is needed. Please don't hesitate to contact me. Thank you.