Custom ESP32 board

I ready you bid and I confirm having the requiref skills ti support you for the whole project. I knw esp32 and battery management sysutem. I prefer using kicad open source Eda tools. I can provide yiu the fulldesign and production files. Please let me know if you are interested. Regards Dario

Hello, my name is Md Raseduzzaman and I am an experienced Embedded Systems Engineer with 4 years of experience in PCB Designs and Microcontroller Development. I understand that you are seeking an experienced PCB design engineer to develop a custom PCB for an ESP32 micro-controller with WiFi capabilities, battery management, wireless charging management, USB connectivity, and a flexible flat cable (FFC) connector. I have extensive experience in PCB design and layout using software such as Altium Designer, Eagle and OrCAD which makes me the perfect candidate for this project. My expertise includes all aspects of the project: from schematic design through bill of materials selection to assembly at the factory end. Additionally, I have experience with ESP32 micro-controller development as well as wireless charging and battery management circuits which will be required for this project. I am confident that my skillset makes me the best fit for this job and would love to discuss further if there is any way I can help! Please feel free to contact me directly if you have any questions or would like me to provide more information about my services.

Hello! My name is Hassan, and I am a certified electrical engineer and artificial intelligence programmer. I have done many classified and strategic projects. I believe that my skillset makes me the perfect fit for your project - especially with regards to PCB design and fabrication processes. With experience in electrical engineering and artificial intelligence, I am able to provide the necessary knowledge to create a custom PCB for an ESP32 micro-controller with WiFi capabilities, battery management, wireless charging management, USB connectivity, and a flexible flat cable (FFC) connector. I understand that the project also requires the design of a flexible flat cable with a small sensor on one end and the connector on the other end. As part of the final deliverable, I would be able to provide all necessary design files and documentation so that they can be sent to a PCB manufacturer for fabrication and assembly.

Hi there! I am Muhammad Adeel, an experienced electrical engineer with expertise in PCB design and layout, battery management and charging circuits, USB connectivity for programming purposes and designing flexible flat cables integrated with sensors. If you are looking for an experienced PCB design engineer to develop a custom PCB for an ESP32 micro-controller with WiFi capabilities, battery management, wireless charging management and USB connectivity then I am confident that I would be the best fit for the job. I understand that you are seeking a designer to develop a custom PCB for an ESP32 micro-controller with WiFi capabilities, battery management, wireless charging management and USB connectivity requirements. Additionally we require the design of a flexible flat cable with a small sensor on one end and the connector on the other end. The final deliverable should include all the necessary design files and documentation to send to a PCB manufacturer for fabrication and assembly. I believe I have all the necessary skills and experience to successfully complete this project including proficiency in PCB design and layout using software such as Altium Designer, Eagle or KiCad as well as experience with ESP32 micro-controller and WiFi circuit design. Additionally I have knowledge of electronic components selection and sourcing which will be an asset when

I understand you are seeking an experienced PCB design engineer to develop a custom PCB for an ESP32 micro-controller with WiFi capabilities, battery management, wireless charging management, USB connectivity, and a flexible flat cable (FFC) connector. I have extensive experience in PCB design and layout using KiCad. I am also familiar with ESP32 micro-controller and WiFi circuit design, including the use of an external antenna. Additionally I have experience in battery management and charging circuits including wireless charging. I believe my skills make me the perfect fit for this project. With my expertise in PCB design and layout I am confident that I can create a high quality final deliverable that meets your expectations exactly. Additionally my experience in electronics component selection and sourcing as well as knowledge of electronic assembly processes makes me ideally suited to complete this project successfully. If you choose me for this job please feel free to reach out with any further questions or queries you may have about the project at any time.

I have 13 years if experience in PCB design abd i am currently working on the wireless devices and charging. I will do the work as per our needs and deliver online.

I understand from the description of your project that you are seeking an experienced PCB design engineer to develop a custom PCB for an ESP32 micro-controller with WiFi capabilities, battery management, wireless charging management, USB connectivity, and a flexible flat cable (FFC) connector. I have the necessary skills and experience to tackle this project. My proficiency in PCB design and layout using software such as Altium Designer, Eagle, KiCad and OrCAD gives me the necessary knowledge to develop the required designs for the board. Additionally, I have extensive experience designing boards using ESP32 micro-controllers with WiFi circuit designs as well as knowledge of battery management and charging circuits needed for wireless charging. I am familiar with electronic component selection and sourcing processes as well as fabrication and assembly processes for successful completion of projects. This makes me the perfect fit for this project as I know how to select the best components for optimal performance while minimizing cost.

HELLO; I am working as a research and development manager in a private company. I have more than 5 years of experience in embedded system software and hardware. As for software, I am proficient in microcontrollers such as (*****STM32*****), MICROCHIP, NUVOTON,ARDUINO,ESP32,MSP430,RASPBERRY Pİ. I have experience in communication protocols such as CanBus, ModBus, RS232, RS485,SPI,I2C, TCP IP, Socket Communication. I am an expert in Altium and KiCad programs in hardware. I have read and understood your project. Please write to me for details.

Best PCB Expert! ⭐ ⭐ ⭐ ⭐ ⭐ ⭐ Dear Client, Could you please send me the pdf on my message chat, because I am unable to download it here. I would be thrilled to work on your custom ESP32 board project. With over 30 years of experience in electronics design, circuit design, and PCB design, I am confident that I have the skills you are looking for. ✅My expertise includes proficiency in PCB design software such as Altium Designer I am experienced in ESP32 micro-controller and WiFi circuit design, including the use of an external antenna. ✅Additionally, I have a strong knowledge of battery management and charging circuits, including wireless charging, USB connectivity for programming purposes, designing flexible flat cables, integrating sensors, electronic component selection, and sourcing, as well as PCB fabrication and assembly processes. ✅I will provide you with all the necessary design files and documentation required to send to a PCB manufacturer for fabrication and assembly. Please check out my profile for more details: https://www.freelancer.in/u/HarimohanG ⭐ ⭐ ⭐ ⭐ ⭐ ⭐⭐ ⭐ ⭐ ⭐ ⭐ ⭐ Technology wise I have worked on all the latest technologies like GSM, 5G, Lora, ESP32 Micro-Controller WiFi, USB, Battery Management, Wireless Charging Management etc. I will provide: 1. 24X7 Live support 2. On Time delivery 3. 100% Satisfaction Thank you for considering my proposal. I look forward to discussing this project with you further. Best Regards Hari Mohan

Hi ! I'm a hardware designer since 4 years in France. I used to work with basic microcontrollers such as Arduino, ESP32, STM32 and more ! I read your job description and I have understand your goal, be sure i'd do my best to follow your requirements as far as possible. I got a CID certification from IPC ( Institute of Printed Circuits ) which gave me great advices to provide you a strong design for the lowest manufacturing price. You would be my first mission on this platform ( but not my first design for sure ) and that's why i'm already excited to work with you ! Do not hesitate to contact me if you have any question !

Dear Client, I have experience with complete device development starting from the schematic diagram to the delivery of the assembled electronics with complete documentation. I also have experience in flexible PCB design. Speaking english and responsibility in specified working hours is not problem. The project working time includes the manufacturing and testing of a prototype circuit. Feel free to ask me if further information needed. Best regards, Michael

Dear, I am a pcb designer with 20 years of experience in developing pcb mutlilayer, IMS, flexible circuits, controlled impedance etc. I collaborated with leading automotive brands and digital electronics and power Design standards used are: UL, IPC, CEI for all applications. I propose as a collaborator on line to: -) Development of new PCB, -) Changes gerber files -) Remastered from paper files, -) Industrialization products. -) Cards by PTH in SMD. -) Generations BOM -) Inserting Test point for ic-circuit testing or functional testing. -) Export 3d Board

Hi, I am an engineer with 3 years of experience specializing in design hardware. I can design a lot of hardware from power products such as SMPS and inverter to embedded hardware and software such as door control, airsoft obstacle control. I have been designing using the Altium Designer program since the first year of university. I would love to work with you. If you go to my profile and examine my portfolio, you can see that I have done a project similar to yours.