Zwave arduino shield jobs
CUSTOM CABLE, 4 CONDUCTOR (2 PAIRS WRAPPED IN FOIL SHIELD) #1 PAIR M22759/11-22-5 (GREEN) M22759/11-22-3 (ORANGE) WRAPPED IN FOIL SHIELD #2 PAIR M22759/11-22-0 (BLACK) M22759/11-22-4 (YELLOW) WRAPPED IN FOIL SHIELD OUTER JACKET: MAX. OD 0.280 (SPECIFIC MATERIAL IS OPTIONAL) OD SHOULD BE CLOSE TO 0.280, USE FILLER AS REQUIRED
I need someone to compile an existing project and have knowledge about arduino to communication with mouse. The project is based on AI. Prefer someone have experience about aimbot and related field
Hello, I have a source code project on AI. everything is done but I need some changes and add more feature to it. For example, mouse movement. Prefer someone with Chinese language! So I need to modify the mouse movement. I need to communicate with kmbox version a and version b. Also we can use arduino with usb host shield to run it. Compile everything. When ever we run it. It will detect our GPU and create compile file to the current GPU. Simple UI to change the settings instead using file
I am looking for a consultant who can program a robotic hand to automate manually pleating of cloths. consultant must have an understanding of robotic hands integration with Arduino or raspberry pi.
details can be found in the enclosed document.
SUMO ROBOT Arduino CODE I built the robot but I have errors in the code
I have the cod but it still needs some modifications and I have the circuit simulation. 1st one is automatic you can enter the time for mixing and then enter the time for extruding by the keypad the time in minutes and then seconds 2st is manual in which you have to press the push buttons to start/stop and mixing and extruding the LCD will display the timer countdown for the remaining time in automatic or the state when it's manual + there is a POT-HG to control the speed of the motor the program should ask you first to enter the time for the mixing in minutes and then second after that the program should ask you to enter the time for extruding also in minutes and then in seconds the LCD will display the countdown in seconds in mixing the motor should run in clockwise and in extruding...
I need a timer that is activated with a limit switch. - When the limit switch is pressed, a timer/clock starts to count time. When the switch is unpressed, the timer pauses but does not lose time. When the limit switch is pressed back in, the timer resumes counting up. - Time is shown on a large display that can be seen from 20-30 feet away. - The timer automatically starts at 8:10am - The timer automatically stops at 4:30pm even if the limit switch is pressed in. - If the limit switch is pressed in anytime between 12:00pm-12:30pm then the timer should be paused during that time. But have this option to where it can be turned off, or explain what code would need to be removed to do so. - A second limit with that resets the timer back to 0 when pressed in, but is unable t...
Hey Im looking for a developer to build the following with a goal of having an avatar interact with my array of LED's. Can you use the WebSocketSharp library to establish a websocket connection with the server and send data over the websocket. On the server, use a websocket library (such as ws for Node.js) to set up a websocket server and handle websocket connections from the Unity ...client. The server should also receive data sent over the websocket and pass it along to the React application. In the React application, use a websocket library (such as the WebSocket API) to establish a websocket connection with the server and receive data sent over the websocket. The React application should then use the received data to trigger the LED array (e.g. by sending a signal to an Ardu...
I have a project requireing indivduals that can program raspberri pi and arduino programming. Understanding of Python and java programming. Should have a raspberry pi to test code on your end.
Need someone online to write code while I tell (via google meet or whatever) what the Pi or Arduino should do. Hourly rate and live programming, ssh to Pi can be done via anydesk. You need o be Expert on Raspberry PI and Arduino, including communication between them. Good of level English writing and speaking is a must. Coding is all about a game/escaperoom tasks. If you can program PHP its a +, please add the word Banana in your proposal so I know you really read my Project.
I need to receive a value by the GSM to use it in the rest of the Arduino code , the last thing I reached is receiving a message which data type is mostly string or char , while I need it as a value for some comparisons in the rest of the code.
Display the data of ESP32 with 3 different sensors continuously in the IoT Arduino cloud or any other IoT platform. However, The data need to be stored and easily accessible
Need a arduino programmer who can help me with my attendance project iot based with node mcu
... 5, 10, 15, 30 mins etc. The player will insert a collected token into their personal timer device to extend the countdown clock and therefore stay in the game. Once the token value has run out, they will have to replace it with another token to keep playing. If their timer reaches zero, they are out of the game. The player personal timer device and the token master programmer will be an Arduino Nano or similar. The time token design will be a PCB board that looks like a thin double-sided USB key Project requirements: - x2 PCB Circuits (Token and Timer/Programmer) - x2 IDE Sketches (Programmer and Countdown) Please see the attached project brief for full details. As part of your submitted proposal, please outline your design solution for storing the time values on the ...
...timer fuction on my arduino/tiny rtc module. Please make/provide a code and wiring schedule. Its needs to the next few things: 1) When power up arduino, directly starts a timer that counts minutes upwards. 0-1-2-3 etc. 2) When more then 24 hours running count 1 day, and 0 zero minutes and go on with counting. (weeks not necessary) 3) Constantly write every new minute the count to the memory/ram of ds1307 rtc (it includes battery) 4) When power goes down and up again, the timer must read the memmory go on and start with the latest saved time. So dont start over again with accounting. 5) Give oppertunity in the code the clear the memory/restart the counter bij pressing button x or signal pin x. 6) give me a wire picture (may be easy paint or something) rtc to arduino...
I need help getting an adafruit wave shield to work with the daphc sketch. The serial monitor keeps showing errors in the sd card (I've tested it with multiple sd cards). it plays some files but shows others as fragmented. Sometimes it says no partition detected. I've formatted it in several ways and am at a loss to figure out how to make it play all the audio files. Instructions I am working from starts here:
I am working with Arduino Due (board model: DUE R3), I want it to work with J1939 CAN bus messages. I should be able to program it so that once it sees a specific J1939 message, it should be send out 5 volts to output pins. It should be able to work with multiple CAN bus messages and should be able to send out 5 volt from multiple pins depending on how I program it.
we need to to generate a firmware wifi / bluetooth /cloud services for mobile APP. The firmware has to be indipendent from Arduino applications . Free rtos . Eclipse
I am having errors setting up the libraries for the Adafruit wave shield on my Arduino to get it working. I need someone to talk me through or take over my laptop and set up those libraries to the point that they can demonstrate it is working. It should be a relatively small job. Link here to the product I am taliking about:
I need to remake the jig that's used to apply the shield nameplate to the back of the display. I want a simpler design that doesn't have the part for the MALIBAL letters below the display. I want the jig only for the shield on the back. Is it possible to make a jig for the shield from one part? Like maybe use a hinge on top of the display and then the front and back of the jig snaps on each side of the display.
Rocky.. thank you for everything. Looks awesome and I will use you for future projects. It looks like you've blocked me from chatting with lol Can you do me a favor and send me a zip file for the Cuvee shield logo with Est 2014, Live Life all In, Mendocino grown. You've already sent this to me but I can't find all the files because they're mixed in with all the others. Thank you
I need a timer that is activated with a limit switch. - When the limit switch is pressed, a timer/clock starts to count time. When the switch is unpressed, the timer pauses but does not lose time. When the limit switch is pressed back in, the timer resumes counting up. - Time is shown on a large display that can be seen from 20-30 feet away. - The timer automatically starts at 8:10am - The timer automatically stops at 4:30pm even if the limit switch is pressed in. - If the limit switch is pressed in anytime between 12:00pm-12:30pm then the timer should be paused during that time. But have this option to where it can be turned off, or explain what code would need to be removed to do so. - A second limit with that resets the timer back to 0 when pressed in, but is unable to reset it...
Write up a class for LED that provides basic functions like on/off, blink, fade, pwm. The code must be non-blocking and work on Arduino. For example, I will call (on,3sec, pwm 75%). I will provide class template and list of required functions. This should be a very quick job if you have the right skills. This will lead to many more similar jobs. Please provide your best cost/time estimate. Thank you !
Hey there, I recently brought that micro controller, and I am having big issues with it. Basically any project on Uno, I can not run on Portenta for some reason. Thus the whole thing is turned into kind of frustrating experience. Here are some of the issues that I have: 1. I2c connection with 5V Arduino 2. Serial communication with 5V Arduino 3. Using 5V LPD3806 with Portenta Only people with good command of English. Generic reviews will not be considered. Thank you!
Looking for someone who’s using Linux, arduino, and digispark
...to choice from. As a player you will be able to fully customize your own ship, upgrade the weapons on the ship as you gain reputation and resources during initial gameplay. Combat would the same as Fractured Space (slow ship movements overall as per video): As per video, you will be able to target other players to shoot them, activate special skills/shield/jump speed. You will be able to select up to 5 crew members: Each member will provide 3 implant slots: Ship upgrade system would work as per this video: Apart from ship upgrade, you can also upgrade your crew members with resources. Jump system: You will be
Add internet control to WiFi (ESP-32) 10-person home/office automation Arduino based project -- now working well. Serve as editor, mentor, consultant for me for related projects planned over the next several quarters. Effective English writing skills are important. Think about spending two hours every-other week with more at times. See current code below.
A MODERN STYLE FULL COLOR logo depicting AMERICAN VETERANS (TEAM) - AMERICAN FLAG AND VETERANS - A TEAM OF AMERICANS - AMERICAN FLAG - A BADGE - A LAW ENFORCEMENT BADGE - A SHIELD - AMERICAN EAGLE -
Sleep Apnea Monitor I have developed a mask/monitor, using an Arduino Uno. When I'm sleeping and I stop breathing, a buzzer alerts me to start breathing again. Due to power requirements and the weight of the Arduino, only the wind sensor and buzzer are mounted on the mask. These are connected by five-foot wires to the Arduino, which in turn is connected to a 110-volt outlet. The goal of this project is to eliminate the wires and create a wearable mask with all components on the mask. This means reducing the weight, powering it with a rechargeable battery and transferring data wirelessly. The Current Approach I have a wind -sensor mounted on a mask. When the user stops breathing, the number of minutes they've been breathing properly, when they stopped,...
I have a small vertical garden supplied with water from a 40 l container (upper left, in video) run through a set of gardena hoses. It's currently turned on and off manually. However, I would like that to programmable for...gardena hoses. It's currently turned on and off manually. However, I would like that to programmable for when on vacation. The problem, however is that the gravity-pressure from the container is not large enough to push through most of-the-shelf systems, I think, probably because they are these tight electromagnetic valves. I therefore want to buy a solution that can overcome this. I call it an Arduino-controlled ball-valve because I think that would be a neat solution, but really anything you suggest that convincingly sounds like it would work is somet...
Hello,i am looking for guys to build me an website for my startup which set to make development board (similar to Arduino) . The site would be hosting the board details and won't do sales/retail work. I would share the model site via chat. The site should work effectively when accessed through both mobile and pc.
I want someone to write code in Arduino App for the attachment below
All I need is help making the motors move. There is starter code with lots of information and implementation in it already.
C code with Arduino UNO 1. Switches SS S1 S2 S3 S4 These switches should be (OFF). Before start next steps delay for (1) minute. 2. Internal Alarm (ON) for (15) second then turn (OFF). 3. Sound Sensor (ON) when detect sound turn (ON) the External Alarm until any of the switches SS,S1,S2,S3,S4 turned (ON) then turn (OFF)the sensor and the Alarm. 4. Motion Sensor (ON) when detect movement turn (ON) the External Alarm until any of the switches SS,S1,S2,S3,S4 turned (ON) then turn (OFF)the Sensor and the Alarm. 5. When any switch is (ON) turn the alarms and sensors (OFF). // Please put your notes and pins number or any additional explanation.
MPU6050 sensors Arduino Bid if you have sensors for testing
your task will be to create an Arduino sketch to calculate the closest combination possible to a target sum input will be as follows an array of floats, the target value, the min limit, and the max limit. this should take a few hours so please don't bid for 7 days and no this is not a $150 project
hi, i need help to build a bartender with a nema17 stepper motor and a Linear guide and 1 servo. i already have a idea of how it should work . i need help to chose the correct components (stepper driver, Arduino or Raspberry pi ect...) you will have to help me choose the right components and help me write the code for the project to move forward. i already have: - arduino uno - raspberry pi 3/4 - linear guide - stepper motor - drivers (TMC2208,DRV8825) I have a preference for the raspberry pi and python Maybe only weekend we will be working on this projet, i'm not in a hurry, the goal is to learn at the same time I speak french and english if you have any questions, do not hesitate to ask questions in private in order to fully understand my needs
I am looking for a very new Reference sheet of my Furry character made into a human, In actual armor inspired by the Furry Reference sheet (Demonic_OverLord_sfw...two horns like where they once was. () 13. The lower body part doesn't have any thigh protection plates, just tight black leggings. 14. The legs (Knee to foot) has plated boots that is the same style as Sauron Items: 15. She uses a Necro book (File Attached) 16. A Spear with a design Saurons mace would look like if it was a spear. 17. A Shield With spikes. (File Attached "Honour Guard Shield") Remember no hesitaion! to comment questions if you got any, and i'll get to you ASAP, i'll reply to your comment and/or i'll update the files with another reference. Have fun, i look forward to ...
Have an idea that I'd like to pursue - need someone familiar with arduino projects.
...obtain: - Complete technical drawing. - Arduino program, containing comments for understanding the flow. - List of recommended components, cables, boards, motors, other elements deemed necessary for future purchase. The idea is to have two Servo Motors and a DC motor. The DC motor in the center, axis C, image attached, being powered by a current that will pass through a Slip Ring Connector B. Such Slip Ring Connector turns from axis B, which represents the second servo motor, also powered by current that will pass through Slip Ring Connector A, coming from A. The DC motor will be activated as soon as the Arduino is connected to the power source. Servo motors will be driven clockwise and anti-clockwise according to 4 Push Buttons connected to Arduino Board. In the...
...obtain: - Complete technical drawing. - Arduino program, containing comments for understanding the flow. - List of recommended components, cables, boards, motors, other elements deemed necessary for future purchase. The idea is to have two Servo Motors and a DC motor. The DC motor in the center, axis C, image attached, being powered by a current that will pass through a Slip Ring Connector B. Such Slip Ring Connector turns from axis B, which represents the second servo motor, also powered by current that will pass through Slip Ring Connector A, coming from A. The DC motor will be activated as soon as the Arduino is connected to the power source. Servo motors will be driven clockwise and anti-clockwise according to 4 Push Buttons connected to Arduino Board. In the...
Need someone to work with me for App developments in flutter for many projects in future.
Christmas party shield show with pictures for work to be laying while supper is being served for Christmas need done quick
Christmas party shield show with pictures for work to be laying while supper is being served for Christmas need done quick
IoT ABM & monitoring software to control many geographical distributed devices, in one centralized application for remote control, ABM, monitoring and reporting. Workflow: ABM & Monitoring app <---> Gateway <---> Devices (for example camaras, sensors, etc...) It may be necessary use of Arduino, C++ , although its open to the best technology/solution you propose. MVP budget: ~USD 500
