Project atmel jobs

Hello, I am looking for a developer to design a DMX512 Transmiter and receiver Controller using any of the AVR Atmel microcontrollers. The controller design has to be flexible to be setup for outputs of, analog 0 to 10VDC or PWM up to 1.0KHz or GPIO. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only ever exist in one place in the Buyer's environment--Deliverables must be installed by the Seller in ready-to-run condition in the Buyer's environment. b) For all others including desktop software or software...

This project involves developing a graphics device driver for Windows CE that supports Direct Draw. High performance is a requirement. The target platform is based on Atmel AT91RM9200. The scope of the project is unclear, and will be discussed with the right coder. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only ever exist in one place in the Buyer's environment--Deliverables must be installed by the Seller in ready-to-run condition in the Buyer's environment. b) For all others including...

This design project involves the production of a working prototype of an underwater sound velocity sensor. Full details can be found in the attached file... ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only ever exist in one place in the Buyer's environment--Deliverables must be installed by the Seller in ready-to-run condition in the Buyer's environment. b) For all others including desktop software or software the buyer intends to distribute: A software installation package that will install th...

This project involves graphical LCD control and display, RS232 comms and push button monitoring: Please see attached zip file. It contains the schematics of the PCB, the PCB gerber files and a description of the serial interface. We using a Displaytech LCD screen in portrait mode (width less than height) to fit in the display area we have. This LCD needs an LCD driver chip we have connected this on the PCB but there are zero ohm links to allow rewiring if required. Data sheets for the screen and driver are in supplied zip file. The firmware will read in a serial string from a rotational gyro (string is terminated with <CR><LF>) and display on the LCD screen Heading Latitude and status read from the string. The firmware should be designed to run on an AT...

...(No GPL, GNU, 3rd party components, etc. unless all copyright ramifications are explained AND AGREED TO by the buyer on the site per the coder's Seller Legal Agreement). ## Platform - Must be based off one of these processors: Maxim networked 8051 (DS80C400), Imsys java processor, Lantronix 186 with integrated network (DSTni-EX) or RDC 484 with integrated network (R8610-G). I will accept PIC, Atmel AVR or ARM but prefer above processors - Software must be written in Java or assembly for Maxim processor, Java for Imsys processor, Assembly or DOS (preferred) for RDC or Lantronix processor. I prefer to use Lantronix or RDC processor with DOS. - Watchdog timer (most processors that I specified you can use have built in watchdog timer) - TPM security chip with the software ch...

Our company is outsourcing an electronic engineering project to create a device that acts as a “front panel” for controlling a custom device. This device should have the following features: - Based on an Atmel ATMega 2561 (16MHz RISC CPU, 64pin TQFP), with an external 64KB SRAM (to use as a display framebuffer) - A graphical 320x240 4” TFT display, with 18bit RGB interface - 8 navigation buttons, implemented using capacitive glass sensor using Quantum’s QT1101 IC. - Auto sensing (110/220 VAC) switching power supply with +12V output (100W) for powering the device, plus a simple independent rectifier power supply for powering the front panel device. - Charge control for an internal lead acid 12V battery with automatic fallback (UPS) in case of los...

i basically want to develop a Cathode ray oscillioscope application which runs under linux and windows (atleast one of them), which basically takes the ADC samples from the Atmel tiny26 microprocessor on STK200 cable. the micro itself is 8 bit, 2kb ram. though the speed isnt a very big issue itself. but a reasonable sample speed around maximum frequency of 4khz signal should come out reasonable accurate in the application. major tasks involved are: 1. programming the ATMEL tiy26 with stk 200 cable in C or assembly to sample the incoming signal of around 4 khz with reasonable accuracy. 2. creating an application which can run under linux and prefrably under windows as well using QT designer and Kdeveloper from fedora core operating system. 2.1 the application itself sho...

Reverse engineer the firmware for our product, simplifing it in the process and making some changes. We do not have the original source code. It was originally written in C but C or assembler would be acceptable. Must be familiar or be able to get up to speed quickly on the atmel AT89C51RD2 chip and LCD driver chip T6963C. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only ever exist in one place in the Buyer's environment--Deliverables must be installed by the Seller in ready-to-run condition in the Buyer'...

Hi, I'm looking for PIC and ATMEL programmer to a small project. You can choose what compiler you will use. Programs are basic stuff like feedback control with limiters. Reading A/D and I2C, SPI and inputs, writing to PWM and outputs. Leds, motors, relays. LCD is not needed. First you must help me to choose the right uC. My number is +358 50 3674 013, if you need it. ## Deliverables Hi everyone I got enough bids to this simple uC project. I must limit sellers somehow. I do it by time zone. So Asia and America are out for now. Europe and Africa are in. It is easier to communicate, and cheaper to send circuits, if needed. ************ Hi, I'm looking for PIC and ATMEL programmer to a small proj...

This project is for the ATMEGA128 Processor. I need someone to develope a routine that will work in the bootloader section of the atmega. This routine will be a software communication routine that needs to transfer a 16 byte hex string from the windows based PC via it's Parallel Port To The Atmega128. The only pins that can be used are listed below, the pins PE1,PE0,PB1 are the pins that are only available to transfer the data. THIS IS NOT, SPI OR ISP it is a standalone communication link that simply uses 3 i/o pins for input and output of data bits via bit-banging. The software on the PC side needs to control the parallel port of the PC and be written in visual basic. I need to be able to enter in a 16 byte string into a textbox and once I click "Send," it ...

This project is produce an single chip msuci synthesizer multichannel using an small microcontroller like a Microchip PIC, Atmel AVR or Cypress PSoC. Preference is the PSoC device but I am open to other MCU's. MCU will accept data over a serial port and play audio. MCU should also be able to save tunes to eeprom and play them back when triggered. Synthesizer should be capable of 4 channels, creating different waveforms (sine, saw tooth, sqaure wave) and generating white noise. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side ...

This project is to develop a simple a simple speech recognition system using an 8 bit embedded MCU such as a Microchip PIC, a Atmel AVR or a Cypress PSoC. Preferce for using the the Cypress PSoC but I am open to other processes. A general overview of speech recognition can found at: **Features** * 9600 Baud N/8/1 Communications * Speaker Dependant and speaker independent recognition of 10-16 pre programmed words * Windows based software to record and program new words or record on the IC * Simple microphone interface * Audio Prompts * LED Prompt RGB LED **Microphone Interface** The microphone interface to the MCU should be as simple as possible and use only as many external components as absolutely necessary

This project is produce an single chip speech synthesizer exactly or somewhat like the old GI SP0256-AL2 IC or the new Magnevation SpeakJet IC using an small microcontroller like a Microchip PIC, Atmel AVR or Cypress PSoC. Preference is the PSoC device but I am open to other MCU's. Sound is generated either by DAC or PWM. The SP0256-AL2 used LPC compression to generate phonemes which allowed some smoothing between sounds. Phonemes are synthesized in real time using either LPC or some other low bit rate audio compression. I am not interested in approaches where SP0256-AL2 samples are played back from EEPROM. MCU will accept data over a serial port. Data is single byte data where each byte represents a single phoneme or timed silence. The phoneme set can be the same as t...

i have a eeprom hex program for an atmel cip but is looked i need the pasword as soon is possible. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows? (depending on the nature? of the deliverables): a)? For web sites or? other server-side deliverables intended to only ever exist in one place in the Buyer's environment--Deliverables must be installed by the Seller in ready-to-run condition in the Buyer's environment. b) For all others including desktop software or software the buyer intends to distribute: A software? installation package that will install the software in ready-to-run condition on the platform(s) speci...

The current project is an embedded device using an Atmel AVR MCU (ATMega32). The application has already been written in a subset of Visual Basic and is fully functional. We would like to port the application directly to AVR assembly in order to reduce manufacturing costs. The application is relatively small, consisting of approximately 550 lines of commented VB code. The application, as written, includes the following functions. A-D conversion. Persistant variables. RS232 serial port. Menu driven user interface using the above. Multitasking. Setting various digital output pins accourding to AD values as per user defined limits. Reading several digital input pins for user interaction. The origional source code is available to bidders via email. ## Deliverables 1) Complete ...

I need startup code for GCC ARM that initializes C for a small embedded application without any OS for ARM and Thumb mode. (C only, C++ is not required.) A hook must be supplied for user specific code before memory is initialized and stacks are setup. This is intended for setting up memory and board - chip selects, DRAM etc - but the ...request. 3) All deliverables will be considered "work made for hire" under U.S. Copyright law. Buyer will receive exclusive and complete copyrights to all work purchased. (No GPL, GNU, 3rd party components, etc. unless all copyright ramifications are explained AND AGREED TO by the buyer on the site per the coder's Seller Legal Agreement). ## Platform ARM based embedded board. For instance Atmel AT91, Philops LPC2000. I may be...

I need some code written for a sample project. It will use an ATMEL ATTINT28 (was ATTINY12L but not enough I/O for application) to control a fujitsu E07SL Serial PLL and control power by turning on and off a switching regulator. It will have 8 channels and channel selection will be by single momentary button. the same button will be used for power on and off. The selected channel is to be stored in eprom. Operation is straightforward as follows. push momentary button less than 1 second wakes up micro and turns on regulator. if user presses button again for less than a second, micro turns off regulator. If when on user presses button for 3 seconds or more, led will flash 5 times fast (indicate program mode) the user then presses the button the number of times to indicate a cho...

Using a Stell-com 2500 programmable modem which contains a Atmel atmega 128 chip. Write firmware to read data from a 1-wire bus via TTL or RS232 port, and prepare data for transmission. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only ever exist in one place in the Buyer's environment--Deliverables must be installed by the Seller in ready-to-run condition in the Buyer's environment. b) For all others including desktop software or software the buyer intends to distribute: A software installation package...

...engineer to design for me. It is based on a Zilog Microprocessor and I will supply all part numbers, schematics and details after a coder is selected. I would prefer if you were familiar with Zilog or can get familiar with it with ease as i do not want to have to ship a bunch of samples especially overseas (but will if i absolutely have to). The Zilog is comparable to an ATMEL, in fact we were real close to using the ATMEL instead, but the engineer opted for Zilog. The engineer also typed up a programming guide which should make this easier. I do not yet have professional prototypes but have one prototyped on my breadboard. Even though I had to hire the electronics engineer and now coder, i am familiar with both and will do most of the installation of the code on the bread...

hi i need to program a atmel 2313 chip, i have the first part done, as can be seen in the example then need to add the extra code to stabilise the output at 12V across the required input range, by measuring the output voltage with the comparator and pot, and adjusting the pulse width to compensate - standard negative feedback stuff. You'll need to add a deadband to the code, to make sure that the feedback loop is stable. The deadband will need some experimentation, or lots of maths. It needs to be wide enough to keep the thing stable and narrow enough to adjust the output quite quickly when the pot setting is changed. This type of system is quite simplistic, there are better, much more complex ways to do it. I need it written in atmel AVR studio 4, which is free on the ...

REVISION..... Due to all the questions, and the huge spread of cost in the bids, I've revised the description below, and I've also attached both a functional schematic of the finished project, and a text file of the pseudo-code of what the PIC is needed to do. The other slight change I made is to accept a design of one M5451 per five digits so that I can physically mount the LEDs on daughterboards for layout reasons. I wish to pass 12 numerical variables, all of five digits, from a PC through the serial port to an external board, where they will be displayed on standard 7-segment LEDs. I have obtained M5451 driver chips each of which requires a two-wire input (clock and data pulse) to drive five digits each to actually run the displays. What I require now is...

...messages, and priority delivery to provide bounded transaction times. Support for network management services allow for remote network management tools to interact with devices over the network, including reconfiguration of network addresses and parameters, downloading of application programs, reporting of network problems, and start/stop/reset of device application programs. Components Allowed: ATMEL SMD Microcontrollers - System-on-chip, Protocol Firmware for all Layers 1-2, 3-6 ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows? (depending on the nature? of the deliverables): a)? For web sites or? other server-side deliver...

i need a microcontroller to emulate a xbox controller ( all functions analog and digital) coder must provide schematics, microcontroller code and prototype for testing. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-ru...in this bid request. 3) All deliverables will be considered "work made for hire" under U.S. Copyright law. Buyer will receive exclusive and complete copyrights to all work purchased. (No GPL, GNU, 3rd party components, etc. unless all copyright ramifications are explained AND AGREED TO by the buyer on the site per the coder's Seller Legal Agreement). ## Platform microcontrollers preferably atmel or cypress, but any...

I'm trying to developing a home-made PlayStation2 controller by using a ATMEL microcontroller. I made it work for digital mode (for a PS1 shooting game). However, I had problems to make it work on PS2 games. PS2 always shows 'no controller detected'. What I want to have is an example of the firmware for PS2 controller. It is unnecessary to work for ATMEL microcontroller. For other kind of microcontroller is ok. The price is negotiable for reasonable #. thanks ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows? (depending on the nature? of the deliverables): a)? For web sites or? other server-side deliverabl...

I'm trying to developing a home-made PlayStation2 controller by using a ATMEL microcontroller. I made it work for digital mode (for a PS1 shooting game). However, I had problems to make it work on PS2 games. PS2 always shows 'no controller detected'. What I want to have is an example of the firmware for PS2 controller. It is unnecessary to work for ATMEL microcontroller. For other kind of microcontroller is ok. The price is negotiable for reasonable #. thanks ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows? (depending on the nature? of the deliverables): a)? For web sites or? other server-side deliverabl...

Hi, I am looking for analog/digital/programming skilled designer to design similar system like in following link. Details about design will be discussed later after I receive BID's. <> ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-ru... Best Regards, Harri * * *This broadcast message was sent to all bidders on Tuesday Apr 5, 2005 10:26:54 AM: Sensor I will use is : Bosch LSU-4 * * *This broadcast message was sent to all bidders on Tuesday Apr 5, 2005 10:29:04 AM: Sensor I will use is : Bosch LSU-4 ## Platform Windows Microchip or Atmel

Require a Mp3 Encoder and Decode for an embedded ARM7 platform [(Atmel AT91M40400)? We require the client to conduct a research for the possible specifications and send it to us for a decision. We have a excellent payment track record here. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows? (depending on the nature? of the deliverables): a)? For web sites or? other server-side deliverables intended to only ever exist in one place in the Buyer's environment--Deliverables must be installed by the Seller in ready-to-run condition in the Buyer's environment. b) For all others including desktop software or software the b...

Digital voltmeter software We want to make a device able to measure voltages using a controller (ATmega8). We need someone to write some software. The bidder needs STK500 or equivalent. No other hardware required. The input signal is conditioned so that at the controllers ADC input it is always in range 0.5-2.5V. The software must controll the signal conditioning part using 4 lines (G0-G3) resulting in 4 selectable gain factors. Autorange function is required (like some digital multimeters). You will get the complete description of the analog part. The tests will be done using RS232. Reading adc will read from uart, same thing for write G0-G4. Thanks for bidding! ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code...

...windows XP,98 with installation setup file. Control panel for seting up recorder functions remotely. Save the downloaded files as WAV files so can be played on a PC The files will have a time stamp. search function to search the wav file and locate speech if long silence is recorded. please make a bid for software only and also for an hardware proto. The micro used will be Atmel AVR ATmega 32,64,128 or PIC ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only ever exist in one place in the Buye...

I need a software to run on an AVR Mega32,64,128 or on a PIC microcontroller that will sample speech using a build in A/D in 96kb/s ,compress it to a 3:1 or 4:1 (32kb/s , 24kb/s) select by user and write the data to an SD flash card. The software will receive a command thru RS232 and will send out the data stored in the SD card in 256 byte blocks with CRC and ...specified in this bid request. 3) All deliverables will be considered "work made for hire" under U.S. Copyright law. Buyer will receive exclusive and complete copyrights to all work purchased. (No GPL, GNU, 3rd party components, etc. unless all copyright ramifications are explained AND AGREED TO by the buyer on the site per the coder's Seller Legal Agreement). ## Platform Windows XP ,PIC micro , Atme...

I need a new electronic controller for a relays based coffee machine. This means an electronic with microcontroller (8051 prefered, but it's not an issue if there is another type), depending on the uC, 32KB RAM, min. 2KB EEPROM. I prefer a uC with internal FLASH to avoid external EPROM, and, if posible, with internal RAM and EEPROM (Atmel 89S8262 for example). The electronic must include also real time clock. The power components (13 motors, 5 electrovalves) must be commanded independently (6-14 seconds, with 100ms increment). I don't want to use any semiconductors (thyristors, triacs, etc) to command these power components. A relay like Schrack RT314012 it's very good for this purpose. Also the serial latches from Altera, UCN5841 are apropriate to command these relay...

I need the re development an an existing application to convert the type of smartcard that it currently uses from an SLE4428 protected memory card to an atmel at88cs1616c (crypto memory card). ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only ever exist in one place in the Buyer's environment--Deliverables must be installed by the Seller in ready-to-run condition in the Buyer's environment. b) For all others including desktop software or software the buyer intends to distribute: A software installation...

Using an AT89S8252 Atmel microcontroller, you must change the state (30 seconds) and return in previous state, of a port output (16), depending on the binary strings (10 bytes) provided on other input port. Pause between charcters of string must not exceed 3 seconds. After that time, the microcontroller goes in the wait for string state. 10 valid characters in string, must activate coresponding port line. Using RS232 interface, an user must be able to set the strings (which goes in EEPROM memory). AT89S8252 has 8KB Flash, 2 KB EEPROM, and 256 bytes on-chip RAM. I don't want any other external memory ! Watchdog timer must ensure that the microcontroller don't lookup or enter a never ending loop. ## Deliverables Complete and fully-functional working program(s) in b...

I need the source code and schematic that will allow an ATMEL 8051 AVR chip to read Diagnostic codes from an ODBII system. Source code means the source that will be programmed to the 8051 AVR chip. Circuit Board refers to the board that the 8051 chip will reside on and all nessecarry power and interface connectors to drive the chip and allow for communication. A) Source code to read CAN (Controler Area Network / ISO-9141) B) Source Code to read VPW (SAE J-1850 VPW most GM vehicles) C) Source Code to read PWM (SAE J-1850 PWM Most Ford Vehicles) D) Schmetic of the circuit board for each of the above. (assuming the circuit will vary greatly for each one of the above connections) E) Upon powering up the circuit should put the car's computer into "real ti...

The microcontroller should be able to act like 2 xbox controllers, should have 28 digital (common ground) inputs and 12 analog inputs the output should be a conection to the xbox port this will be used as a jamma 2 xbox adaptor ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) All code...included 3) All deliverables will be considered "work made for hire" under U.S. Copyright law. Buyer will receive exclusive and complete copyrights to all work purchased. (No GPL, GNU, 3rd party components, etc. unless all copyright ramifications are explained AND AGREED TO by the buyer on the site per the coder's Seller Legal Agreement). ## Platform Any microcontroller Accepted, But i...

We require to devise a non-mechanical currency counter based on embedded C preferably using ATMEL AT89C2051 microcontroller. This must work for all types of notes, good and soiled. You have to make a algorithm to detect the stack edges of the bundle to count (which will mostly have a rubber band tied on one side) . Your require to consult us fully on Optics, hardware mechanisms, motors, gears drawings etc if any. The technology ownership will remain with us, but company will pay for all version updates to the system. Please remember we are not interested in the type of currency (or fraud checking) only COUNT the notes. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must b...

Small and quick project using ATMEL uC 8515. We urgently require the following C or ASM program with a designed circuit for the given task. Also present us with a HEX file for burning it on the uC and the circuit schematic with all required components. Details in the zip file. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows? (depending on the nature? of the deliverables): a)? For web sites or? other server-side deliverables intended to only ever exist in one place in the Buyer's environment--Deliverables must be installed by the Seller in ready-to-run condition in the Buyer's environment. b) For all others ...

Wish to develop a system similar to CMUCam Vision Sensor. You are required to supply us the firmware with source and a PCB layout. We also own the whole system upon acceptance hence do not use 3'rd party stuff.[ ~cmucam/][1] ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all w...platform(s) specified in this bid request. 3) All deliverables will be considered "work made for hire" under U.S. Copyright law. Buyer will receive exclusive and complete copyrights to all work purchased. (No GPL, GNU, 3rd party components, etc. unless all copyright ramifications are explained AND AGREED TO by the buyer on the site per the coder's Seller Legal Agreement). ## Platform Embedded / ATMEL...

Hi all. I h...design (surface mount, total pcb size under 1" square) and assembly (~500 units). The initial price for the code on this project is < $100 as its so simple - the additional work is for later quoting by yourself. I will reimburse device purchase costs (PIC/AVR, possibly a cheap programmer, but you should have one if you're bidding for this ;)) ## Deliverables So, I will want :- - The source code in asm/c/whatever - A compiled hex file of the program - Full ownership over the code .. and most importantly, for you to be available within short notice (< 48 hours) to make any slight changes. ## Platform Microchip PIC .. or Atmel AVR Assembly or C is acceptable. 8 pin package, DIP is fine f...

I have a simulation program that can simulate electronic components such as diodes, transistors, resistors etc in a circuit schematic down to the voltage and current level. The program has a plug-in capability so that users can design new devices and plug-it into the program using a DLL written with Visual C/C++ For this project I want to coder to: 1. Use the plug-in capability to write a CPU simulator/architecture that can eventually be used to simulate different CPUs, but for now just simulate one CPU to verify that it works. The simulation should include the CPU internal peripherals like registers, timers, interrupts, watchdog, ports etc. 2. Write a debugger that runs with the simulation that allows the user to: load in a HEX file in the CPU for simulation, see the dissasembl...

Single Chip Video Controller Software and Hardware project The software goal of this project is to develop software for an Atmel AVRMega chip so that it can be used as a single chip video controller. This controller could then be for used with embedded microprocessors such as the Parallax Basic Stamp or Microchip PIC. No external memory is to be used. The hardware goal is to send me a working circuit with the chip so that I can verify that it actually runs. The features are listed below: 1. Minimum external components required. Not sure if an internal oscillator is stable enough. May require additional crystal and cap. 2. Monochrome VGA output 3. Monochrome Composite output using 3 additional resistors 4. Output type (VGA or NTSC Composite) is selected by t...

Avr Parallel Fuse Programmer I am new at AVR code and require some source code reported to work in an atmega128. The source code is now ported for a 90S1200-4. I will need both compiled (hex)and source code. Only asm (NO C source)please. And the changes that were made noted in the file. ## Deliverables 1) Complete and fully-functional working program(s) in e...all work done. 2) Installation package that will install the software (in ready-to-run condition) on the platform(s) specified in this bid request. 3) Exclusive and complete copyrights to all work purchased. (No GPL, GNU, 3rd party components, etc. unless all copyright ramifications are explained AND AGREED TO by the buyer on the site per the coder's Seller Legal Agreement). ## Platform Atmel AVR Fuse Program...

...on the schematic then connect it to other schematic components and simulate the whole thing at the voltage level. I want the CPU to simulate real code, interrupts, ports, built in peripherals, set break points, trace buffer, examine registers, memory etc. So basically I want add CPU simulation capability to my existing program. I want to simulate the entire MicroChip PIC family and the Atmel AVR family. At first just start off with one to get the basic architecture and core. Then if that goes well, I will hire you again and again and again to write code to simulate all those other processors using the core architecture you designed for the first processor. You can write the code from scratch, or modify existing GNU or GPL or other public domain CPU simulators and a...

I am new at AVR code and require some source code reported to work in 2 other chips. The source code is now ported for a 90S1200-4. I require the code to work with a 90S8515-8 and an atmega128-16. I will need both compiled (hex)and source code. Only asm (NO C source)please. And the changes that were made noted in the file. ## Deliverables 1) Complete and fully-functional working...all work done. 2) Installation package that will install the software (in ready-to-run condition) on the platform(s) specified in this bid request. 3) Exclusive and complete copyrights to all work purchased. (No GPL, GNU, 3rd party components, etc. unless all copyright ramifications are explained AND AGREED TO by the buyer on the site per the coder's Seller Legal Agreement). ## Platform Atmel...

...on the schematic then connect it to other schematic components and simulate the whole thing at the voltage level. I want the CPU to simulate real code, interrupts, ports, built in peripherals, set break points, trace buffer, examine registers, memory etc. So basically I want add CPU simulation capability to my existing program. I want to simulate the entire MicroChip PIC family and the Atmel AVR family. At first just start off with one to get the basic architecture and core. Then if that goes well, I will hire you again and again and again to write code to simulate all those other processors using the core architecture you designed for the first processor. You can write the code from scratch, or modify existing GNU or GPL or other public domain CPU simulators and a...

I want to know flash bios writing example for my educational purpose. I want to to write "abc..xyz" on flash bios boot block. Program should be compatible with various chipset motherboards like Intel 810,815,845,SIS 530/630,VIA,ALI (and so on...) and also compatible with Award BIOS/Americal Megatrends having different flash chips or capacity like Intel,SST,WINBOND,Atmel,EON ....5V/12V etc. I know what I will get after that "A dead motherboard". Don't worry I have three extra motherboard and a flash utility to backup/restore bios boot block. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Installation package that will install the software (in ready-to-run condi...

This is for a different project than the other I have listed on this site Essentially I need to control a PLL in a very basic fashion. the chip I have chosen for this project is the ATTINY12L by atmel output is I2C to control the PLL. input to the TINY is 2 tactile switches for up and down . it is to roll over the the start if up passes upper limit set in software and the reverse for down for 62.5khz steps over a 30 mhz range. very basic and very simple. All frequency limits, scanning speed and last frequency used are to be stored in the eeprom location of the TINY. The software is to write its last frequency load to eeprom so at power loss, it knows where it was and can resume from last setpoint PLL datasheet is enclosed Make me an offer. Tha...

**Electronic Flickering Candle **Based on microcontroller, PIC or Atmel driving 3 Light emitting diodes, LEDs and accepting input from thermistor and potentiometer sensitivity control. Allow three LEDs arranged in vertical pattern to replicate flicker of real candle PWM or PPM, preferably,**Must** be able to dim and fade LEDs , **NOT** just full on or off. Vary flicker depending on wind input from simulate flicker of candle in breeze and steadier flame in still air. Allow for poteniometer sensitivity for wind sensing thermistor. This is at maximum three channels of PWM/PPM and one of A/D the smallest 8 pin microcontroller should be useable. Though the deal is for the ASM and HEX files for the selected microcontroller am not concerned if

I want a source code written in "C" only for flash bios writing. program should be compatible with all latest motherboard chipset (intel 810,815,sis630,sis530,intel 845) and flash bios chipset(winbond,atmel,sst,intel either 5v or 12v). be remember that i don't want to flash bios.. i just want to write "kuch bhi" on flash bios.( i know what will i got after that....a dead motherboard!!)and that i want... ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Installation package that will install the software (in ready-to-run condition) on the platform(s) specified in this bid request. 3) Complete ownership and distribution copyrights to all work purchased. ## Platform ...

...do DSP, show results or graphics etc while the simulation is running. Plug-ins can be anything, from simulating a simple light bulb to simulating an entire CPU in real-time. I need many plug-ins made, example test instruments (spectrum analyzer, digital-multi meter, frequency counter, oscilloscope, logic analyzer) or circuit components (fuse, LCD display, switches) or even a CPU like 8051, PIC, Atmel AVR etc. Right now I would need a spectrum analyzer instrument. Then later lots more. A spectrum analyzer looks like this The spectrum analyzer would be placed on the schematic then connected to wires on the screen. As the voltages in the schematic gets generated during the simulation the spectrum analzer will convert it into a bunch of frequencies and show it on