Atmel arm7 project jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    1,287 atmel arm7 project jobs found, pricing in GBP

    ...persons were Ariel and Alan. If new candidates decided to participate, they have to prove that can develop complete embedded systems with STM32, Atmega, NXP, ESP32 as well PCB design, prototype and full production of assembled boards. I'll need the same team for forthcoming projects that I'll post here in Freelancer. The current requirement that will be used ONLY for proving skills: Short project for reading sms from SIM800L with ESP32 and search of a string with password inside the SMS. If password matches, ESP32 should send mail through wifi to given e-mail. C/assembler user for communication with GSM module, for e-mail can use Python. The work is completely software in Visual studio code , but candidates should prove that can build the PCB too. Software ...

    £10 (Avg Bid)
    £10 Avg Bid
    9 bids

    Embedded c programmer required for programming MICROCHIP PIC and ATMEL AVR Microcontrollers. Mostly work required on ATMEGA328P and PIC16F877A Microcontrollers.

    £71 (Avg Bid)
    £71 Avg Bid
    21 bids

    I am in need of a firmware engineer with a strong skills in developing code for ATMEL SAMG processors. The focus of the project is to develop firmware that runs in our 5GV POD modules that interfaces with "plug in modules" that communicate with external sensors. We also require a firmware module that runs on the existing 5GV/Razor/Mini product and interfaces with the POD module(s). Key functions include: - Constructing firmware for the POD module to interface with plug-in modules that in turn, interface with external sensors like vibrating wire sensors, RS485 sensors, 4-20ma sensors, SDI-12 sensors, Pulse and Voltage Input sources. - Developing a module for the 5GV/Razor/Mini gateway/logger that drives one or more PODs. This includes configuration, interrogation an...

    £3681 (Avg Bid)
    Urgent NDA
    £3681 Avg Bid
    6 bids

    Need a PCB designed using the ATMEL SAM21D + SIM7020G and should have the proper resistance trace and connector for an external LTE antenna. It should use a usb connector to program the SAM21D in a similar way to the Arduino MKR Zero. The Atmel microcontroller will be connected to the SIM7020G in such a way to send data over LTE of course. Additionally, there should be 3 channels to measure voltage between 6-40v using the Atmel's onboard ADC. Cost of components should be a consideration. Designs should be submitted in Eaglecad format.

    £358 (Avg Bid)
    £358 Avg Bid
    30 bids

    I require assistance with programming and configuring an Atmel M90E36A. - Task: The primary service needed is writing a C++ code for the stated IC, which will allow for an auto calibration code from Microchip to be implemented. - Outcome: Ultimately, the implementation of this code should result in improved precision of readings. Ideal Skills and Experience: Proficiency in C++ is a must, along with prior experience in dealing with IC programming. Experience in working with Atmel M90E36A specifically, will be an added advantage. Knowledge on Microchip technology and calibration methods would be beneficial in achieving the desired outcome.

    £32 / hr (Avg Bid)
    £32 / hr Avg Bid
    18 bids

    ...EasyEDA but not sure about the circuit connection and route. So need a Pro PCB designer for make my connection perfectly completed . Along with i have added a image of completed pcb. Having a knowledge about the electronics component ie ATMEL MICROCONTROLLER (ATMEGA8A) , CAPACITOR, RELAY, & USR-TCP232 . I require a designer experienced in single-sided PCB designs, accommodating for a larger size - Approcx 15*15 cm. Although the circuitry involved in this project is simple with limited components, attention to detail will be paramount to achieving the project objectives. The ideal candidate will have a proven track record in designing large, single-sided PCBs with simple circuits. Familiarity with standard industry tools such as Eagle or KiCAD would be advant...

    £12 (Avg Bid)
    £12 Avg Bid
    18 bids

    This project involves the design and implementation of a motion controller for a DC motor, incorporating precise speed control through Pulse Width Modulation (PWM) and real-time feedback using an encoder. The system utilizes an AVR microcontroller (ATMega328p) and involves programming in the C language within the ATMEL Studio 7.0 development environment. 1. **PWM Speed Control**: The heart of the system lies in its ability to regulate the speed of a DC motor through PWM. The PWM parameters can be configured and controlled, providing flexibility in adjusting the motor speed. 2. **Encoder Feedback**: To ensure accurate speed measurement, an encoder is integrated into the system. This feedback loop allows the controller to continuously monitor the motor speed 3. **USART Com...

    £264 (Avg Bid)
    £264 Avg Bid
    26 bids

    I am looking for a skilled C++ code programmer who can assist me in transferring data in real-time from an Atmel 860 microprocessor to a Windows laptop. The main goal of this project is to store the transferred data in a matrix format on the laptop. Skills and Experience: - Proficient in C++ programming language - Strong understanding of microprocessors, specifically Atmel 860 - Experience with real-time data transfer and storage - Familiarity with Windows operating system Key Requirements: 1. Data Transfer: Develop a robust and efficient code to transfer data from the Atmel 860 microprocessor to the Windows laptop in real-time, ensuring a fast transfer rate within milliseconds. 2. Data Storage: Implement a code that stores the transferred data in a matrix fo...

    £198 - £594
    Sealed
    £198 - £594
    35 bids

    I am looking for a freelancer who can help me with Mitsubi...PLC programming based on C firmware whihc is written for STM/ATMEL controller on our PCB MCU. The specific model of the PLC is FX Series. I need the plc software to be created from scratch based on C firmware written in IDE compiler The main goal of this project is to achieve process automation through the PLC program. The ideal freelancer should have experience in C programming and Mitsubishi PLC programming, specifically with the FX Series. Skills and experience required for this job: - Proficiency in C programming - Experience with Mitsubishi PLC programming, preferably with the FX Series - Strong understanding of process automation If you have the necessary skills and experience, please submit your proposal ...

    £14 - £119
    Sealed
    £14 - £119
    4 bids

    The code must wait for new data, and if received must save it in a buffer (array of char) and respond with echo of same data as an acknowledgment. The code has to be fast enough to handle data and send back acknowledging echo at high rate (>10KHz)

    £26 (Avg Bid)
    £26 Avg Bid
    3 bids

    Project Title: SAMD (Atmel/Microchip) programming Description: I am looking for a freelancer who is skilled in programming the SAMD21 microcontroller, especially the SAMD21's internal configurations. I am a skilled C programmer with much experience with Atmel/Microchip microcontrollers, using ASF sometimes (when it's convenient) but also coding without ASF. However, sometimes I encounter problems getting the correct C code to configure some aspects of the SAMD microcontrollers. I am looking for expert help so I don't have to spend too much time working on unexpected SAMD configuration difficulties. Specific freelancer requirements: - Very experienced in programming the SAMD21 microcontroller - Proficient in programming languages C Timeline: - The ...

    £29 / hr (Avg Bid)
    £29 / hr Avg Bid
    28 bids

    I'm looking for a freelance prog... but not be able to be extracted or read back by determined people - i.e. fuses and other security features on the ATSAMD51 will need to be employed. I do not want people to extract the program or code and then be able to upload it onto copied devices. I do not require write protect, only read protect. I have ATMEL Studio (on a PC) and a Segger J-Link Mini. I am happy to purchase additional software or equipment as needed. In the past, I put a Bootloader on the chip with ATMEL Studio and the J-Link; but, then used the Arduino IDE to upload the programmer via a USB. I would like the process to be on a word doc, be very clear, step by step and preferably have photos as part of the explanations. The successful applicant may have lots...

    £225 (Avg Bid)
    £225 Avg Bid
    16 bids

    I've got an AVR C project that uses a 10 position rotary switch interfaced to an ATTiny84A. Only 6 positions are to be used, and the position will be queued up with a single push button. The purpose of the dial is to provide input selection, to the ATTiny84A and will turn on power to either 1 or 2, of 3 PORTB pins. This will also require adjustment of PWM on several pins that I will need to adjust several times through the project. I would prefer this be done in Atmel studios as that is what I use, but any format in which I can adjust the duty cycle would be sufficient. This will most likely require software PWM on PB0 due to the use of PB0 through PB2. All the electronics for this project are in breadboard testing and can easily be changed if necessary. ...

    £315 (Avg Bid)
    NDA
    £315 Avg Bid
    17 bids

    I am looking for a skilled freelancer who can design a BLDC ESC P...for a skilled freelancer who can design a BLDC ESC PCB and develop the necessary software. The project requirements are as follows: Voltage Range: - The required voltage range for the ESC is 3S to 6S. Microcontroller Preference: - I have no preference for the microcontroller to be used in the ESC. Intended Application: - The ESC will be used for an RC model. Skills and Experience: - Experience in designing BLDC ESC PCBs. - Proficiency in developing software for ESCs. - Knowledge of microcontrollers, preferably Atmel or Texas Instruments. - Familiarity with RC models and their specific requirements. If you have the necessary skills and experience, and are interested in working on this project, plea...

    £422 (Avg Bid)
    £422 Avg Bid
    13 bids

    ...wheelchair should be able to operate using a programmable control system controlled by joystick - This will allow for customization and fine-tuning of the wheelchair's performance. - it should be close loop system sensing the back EMF to manipulate the speed verse the torque and also sensing the maximum current to do chopping PWM as necessary 2- CONTROLER AND FEATURES : - USING STM or ATMEL controller - the mechanical body of the wheelchair already made and wghit almost 55kg . - it consist of tow battery each 12 volt connected in series. - dual dc motor each 24 volt with maximum current of 7A - THE SPEED OF THE MOTOR IS 3000 rpm and has a gear ratio of 1:10 - each dc motor contain electrical brake system . 3. Reverse Mode - The wheelchair should ...

    £353 (Avg Bid)
    £353 Avg Bid
    30 bids

    I have all the code, but it’s not working the rfid.. and I don’t know why, the language is c and i work in atmel studio.

    £9 (Avg Bid)
    £9 Avg Bid
    14 bids

    Request details I have a C program in Atmel Studio 7 which currently uses a ATSAMS70 to control a radar SOC. The program was originally provided by the radar SOC manufacturer and runs on a development board created by the radar SOC manufacturer. I need help getting the code to run on a new board, still using an ATSAMS70, that has a few changes including removing the external RAM.

    £76 (Avg Bid)
    £76 Avg Bid
    12 bids

    write source or help trouble shoot using debugging tools our existing code. C (Arduino IDE) but prefer to use Atmel Studio Using ATmega328 or ATMega168P QFP CPU Monitor 5 I/O pins - to determine if a switch contact is open or closed Closed is Good, open is alarm condition Also use A/D to drive an LM84T temperature sensor and measure once per minute Alarm condition if temperature is over 75C once per 5 minutes - use serial lines to operate and send a message using HopeRF RFM95 LORA radio module. (this is a 'status ok' message) We have library for this radio module When alarm conditions occur (contact open or temperature >75C) alarm message sent. Message payload is 6bits - we have this defined. Device sends messages only 1650mAH battery - target 5 years life We have this...

    £21 / hr (Avg Bid)
    £21 / hr Avg Bid
    22 bids

    ... hardware proto testing code implementation. making calculations of product dimensions, drawing sketches of product ideas, and designing mockups of proposed products. Develop and complete projects Sourcing of raw materials. Purchase electronics device and equipments depending upon project needs Troubleshooting embedded systems and diagnosing errors, malfunctions, or inefficiencies firmware drivers for hardware peripheral ICs. Analog, Digital, mixed signal, wireless & rf electronics design. Microcontroller (Atmel, ST, Renesas, Microchip, ARM etc.) based system design,development, and testing, Embedded C/C++ Programming. Implementing effective repairs, modifications, and upgrades to the embedded systems Schematic creation according to hardware design and PCB layout desig...

    £10 / hr (Avg Bid)
    £10 / hr Avg Bid
    27 bids

    Hi, How are you doing. I am looking for electrical engineers to work on multiple tasks in following areas: • Embedded C Programming. • VHDL/Verilog, LABView/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. I am looking for long term work relationship. New freelancers are warmly welcomed. Important Note: I need dedicated freelancers who strictly follow the deadline and give me good quality work without any plagiarism.

    £118 (Avg Bid)
    £118 Avg Bid
    42 bids

    I want to generate an I2C slave with a SAMD21. This should have write and readable registers. Unfortunately I can't get this to work. I was guided by the following code: From page 39: The final application “High speed Configuration” in main.c file will be as below for SLAVE. The aim is to provide 256 registers (1 byte in size) with the SAMD21 (as Slave). The I2C master can write and read these registers. Your task is to create this functionality based on the provided example. Only the function "void SERCOM2_Handler(void)" may be adjusted. The I2C master works in FAST_MODE_PLUS. Therefore, the rest of the configuration must remain exactly the same.

    £560 (Avg Bid)
    £560 Avg Bid
    9 bids

    Hi Sardar I need you to write a research report on Atmel comparison with PIC chip. I need 20 pages report with references and tables.

    £555 (Avg Bid)
    £555 Avg Bid
    1 bids

    Miniature battery operated circuit with a few I/Os driving a solenoid. Expertise with a Nordic, Atmel or similar Wireless Microchip is a plus. Located Tulsa, Oklahoma, USA

    £29 / hr (Avg Bid)
    £29 / hr Avg Bid
    25 bids

    We require a embedded software developer to examine the program and change it according to the new PCB also require you to write libraries and working code without altering the other functions. The component in question that has been replaced is a capacitive sensor IC used for touch buttons. Please bid only if you have good knowledge and experience working Atmel studio, Arduino IDE ,Atmel and Arduino libraries ,ESP and atmega controllers , capacitive proximity sensing ICs. We need you to coordinate with backend developers and mobile application developers to test the functionality We have multiple development projects upcoming and you could be our preferred freelance team member. We could Discuss on the Pricing and come up with a mutually agreeable figure.

    £270 (Avg Bid)
    £270 Avg Bid
    23 bids

    We have a display currently using an Atmel Mega 8 processor with RS-232 input. It now needs Ethernet input and program upgrading via the Ethernet

    £891 (Avg Bid)
    NDA
    £891 Avg Bid
    11 bids

    basic servo control (i.e. group actions) with ps2 controller and bluetooth android user interface. hardware is assembled, servos connected. powered with serial and bluetooth connections available.

    £36 (Avg Bid)
    £36 Avg Bid
    8 bids

    ...replace an outdated component with a new one and arrange the components in a different layout on to the PCB We also require you to write libraries and working code without altering the other functions. The component in question is a capacitive sensor IC used for touch buttons. Please bid only if you have good knowledge and experience working with CAD (any electronic cad will work),Atmel studio, Arduino IDE ,Atmel and Arduino libraries ,ESP and atmega controllers , capacitive proximity sensing ICs. We need you to coordinate with backend web application developers and mobile application developers to test the functionality We have multiple development projects upcoming and you could be our preferred freelance team member. We could Discuss on the Pricing and come up with a...

    £123 (Avg Bid)
    £123 Avg Bid
    20 bids

    To work on legacy programs - debug and later re-wrie Preferably Southern England

    £29 / hr (Avg Bid)
    £29 / hr Avg Bid
    18 bids

    I am new to Atmel Studio and having lots of trouble when building a project that I inherited. I need interactive help on Zoom.

    £30 / hr (Avg Bid)
    £30 / hr Avg Bid
    27 bids

    Convert assembly code to C for ATMEL ATSAM4SD16CA-AU

    £418 (Avg Bid)
    £418 Avg Bid
    33 bids

    I want to analyze the code . There is a part I want to detect.

    £672 (Avg Bid)
    £672 Avg Bid
    10 bids

    We have a pcb deisng with firmware that works quite well, we would like to add a couple of features (additional input contact and ntc reading) and so a redesign and a firmware change is required. We need a development company with a lot of experience with pcb design and atmel platform. No prototype needed, we will take care of that. Please begin you bid with atmel, to be sure you read the above. Otherwise your bid will not be considered. Many thanks

    £19 / hr (Avg Bid)
    Featured
    £19 / hr Avg Bid
    18 bids

    I am looking for a professional Atmel firmware engineer with experience in Zigbee protocol. Our custom board is designed to send data over Zigbee. The other parts are working great. We just have an issue in Zigbee communication. It is mainly related with the Zigbee message packet. I can provide with the existing Atmel source code. The task is to review the existing project and resolve the Zigbee communication issue. Only apply if you have experience with Zigbee. To prove that you are serious, please start your proposal with a word "zigbee".

    £126 (Avg Bid)
    £126 Avg Bid
    11 bids

    We are looking for electrical and electronics engineers with good experience in following areas: • Embedded C Programming. • VHDL/Verilog, LabVIEW/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Feel free to place your bid and mention your areas of expertise in your proposal. we highly encourage new freelancers to apply for this post.

    £132 (Avg Bid)
    £132 Avg Bid
    22 bids

    The project is to add the circuit into existing PCB. The circuit is offered. The designer will update the schematic and PCB. And if you know about firmware development for ATXMEGA128AiU and Atmel studio 7, it is preferred.

    £119 (Avg Bid)
    £119 Avg Bid
    50 bids

    We would like to have developer, who can develop atmel or arduino devices which have 6 I/O and data output need in CSV format. Which can be communicate thre BT or Wifi to server or app.

    £276 (Avg Bid)
    £276 Avg Bid
    15 bids

    The project is about programming an operational flow in an ATmega128 Atmel Micro-Controller. Application is controlled via a Nextion Touch Display. As per input on display, complete operation is to be executed to turn ON/OFF the peripherals. Number of Peripherals to be controlled: Digital Output: 17 (ON/OFF or HIGH/LOW) Digital Input: 07 (HIGH/LOW) Analog Input: 04 Nextion Touch Display GUI & Atmel128 Arduino IDE code is implemented. Freelancer just need to implement process level flow program. Request to freelancer to ask for more operation level details if interested.

    £93 (Avg Bid)
    £93 Avg Bid
    17 bids

    Need an example written for a SAML22 processor using ASF4 which allows for a multiple-input 12bit ADC reading. It is simple for anybody who knows Atmel products. Need to be able to read and convert a set of ADC inputs. Must have experience with AMM and SAM processors.

    £108 (Avg Bid)
    £108 Avg Bid
    11 bids

    Assistance needed in porting code written for a PIC18F26K to a more modern model (that is in stock). Program is about 400 lines of C, I suspect the model number may need to be changed and a few pins remapped, but otherwise ...PIC18F26K to a more modern model (that is in stock). Program is about 400 lines of C, I suspect the model number may need to be changed and a few pins remapped, but otherwise the code is usable. Currently using 1 A/D, TX/RX for serial and 4 GPIO pins. The code is doing battery management. If it is less time the code could be ported to Atmel or Arduino if decided, it is not doing a whole lot. Bonus points if you are familiar with Raspberry Pi. This project sends data via serial to the Pi and that also needs some updates. Can discuss that further after t...

    min £40 / hr
    Urgent Sealed NDA
    min £40 / hr
    10 bids

    The task consist to create a bootloader for the SAMD21E17A Microcontroller based on the Microsoft/Adafruit UF2 Bootloader. It needs to be compatible with Arduino for uploading the code, customer requirement. The bootloader has been compiled, however there is no way to communicate with Arduino IDE. Variants were based on TAU and Trinket m0, no luck. It will be probably an easy fix, but I am stuck with it. Looks like some linker script or BOSSA configuration is wrong. I will share my code with you if you need it. Required skills/equipment: - linux/unix environment - C language - Development board with SAMD21E18 or E17 (not a must)

    £146 (Avg Bid)
    £146 Avg Bid
    7 bids

    I am looking for electrical engineers to work for me on long term basis. I need engineers in different domains of electrical engineering. • Embedded C Programming. • VHDL/Verilog, LABView/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications.

    £277 (Avg Bid)
    £277 Avg Bid
    27 bids

    We will keep on purchasing the products from ATMEL&Cypress in San Jose of CA, every month. We need the candidate with the products experience sales,purchasing,or R&D and better to live in the city . We have head office in Shanghai and representative office in VA,USA now and we are prepering to build up one chip technology company for the automotive industry.

    £460 (Avg Bid)
    £460 Avg Bid
    8 bids

    We are one high-tech company headquatered in Shanghai city,CHINA, with business of automotive industry grade chip's IDM supplier design,tapeout,foundry,packaging, test,sales and international trade. We are active to seek some purchasi...chip's IDM supplier design,tapeout,foundry,packaging, test,sales and international trade. We are active to seek some purchasing managers for automotive chip in the countries and regions for chip manafacturers,especially in USA,Japan, Europe. For one purchasing manager for every chip manafacturer incl. TI(in DALAS),Diodes(in Dalas),Freescale(in Austin),ONSEMI and MICROCHIP( both in AZ),ATMEL and Cypress (both in San Jose of CA)Allegro(in NH,or MA),RENESAS (in Japan)ST (in Italy and French),Infineon (in Germany),TSMC(in Taiwan of ...

    £164291 (Avg Bid)
    £164291 Avg Bid
    5 bids

    We are a reputed brand in the field of embedded system need Trainer for embedded system and iot. Designation : Embedded Trainer Salary range : 5-6 lakh per annum Skill set : C , Embedded C , 8051, PIC, ARM7 Good understanding in concepts of embedded system Job Location : Pune Job Types: Full-time, Part-time, Permanent Salary: ₹500,000.00 - ₹600,000.00 per year call on [Removed by Freelancer.com Admin]

    £606 (Avg Bid)
    £606 Avg Bid
    4 bids

    I am looking for an embedded system engineer who can help in bringing up an ATMEL based 32-bit ARM development/evaluation board who has experience in U-Boot, BSPs, JTAG, device drivers and utilities needed for bringing up a board.

    £139 (Avg Bid)
    £139 Avg Bid
    2 bids