Raspberry lte usb jobs

I need a technical expert skilled in Raspberry Pi integrations to create a display of GPS coordinates, IMU data, and set the frequency for a TBS satellite receiver on a 7inch LCD screen. The components for this project are: - GPS module - IMU module - TBS satellite receiver The LCD display should show GPS coordinates and IMU data in real-time. It also needs to set the frequency for the TBS satellite receiver. The Raspberry Pi setup will be powered by a battery, so considering power consumption in the build is important. Ideal skills for this job would include: - Experience with Raspberry Pi integrations - Familiarity with GPS modules and IMU modules - Knowledge of frequencies for TBS satellite receivers - Proficient in power management for computer systems, parti...

We are seeking an experienced skilled Raspberry Pi developer for an exciting machine workflow using Raspberry Pi and servo motors. The project involves developing software for control, and integrating the Modbus TCP/IP protocol. The successful candidate will demonstrate expertise in Python programming, servo control, and Modbus communication. Phase 1: Set up the Raspberry Pi 4b to control servo motors and configuring communication with the Panasonic Minas Driver and Panasonic Servo Motor. Install Modbus server software and develop custom Python scripts for Modbus communication and servo motor control. Phase 2: Control Iron Core Linear motors and configuring communication with the Mitsubishi Driver . This can turn into a long term project for the right candidate.

I would need a script written in nodejs where a USB NFC reader (specifically the ACR122U or the ACR125U) wait for a NTAG424 DNA tag. Once an NFC tag is tapped write a URL data into the tag as well as encryption keys. Make sure the URL contains query parameters which are mirrored uid, counter, and cmac that are all encrypted. Part of this is to write a nodejs script to validate the above parameters from the URL and decrypt the uid/counter (or some Rust that can do the same)

...Requirements: - Transparent Display: The display needs to be integrated in front of a small lens, which will then be in front of an image sensor. The display will serve as the light source, allowing light to reflect off the sample. - Raspberry Pi Integration: The device should be able to stream footage through a Raspberry Pi. Ideal Skills and Experience: - Prior experience in designing and building similar handheld devices or microscopes. - Knowledge of integrating transparent displays and image sensors. - Proficiency in programming and working with Raspberry Pi would be a plus. - Understanding of scientific research needs and standards. The ideal candidate for this project should be able to assist with the full development cycle from conception to pro...

Build an ISO for a raspberry pi (with cellular notecard) to scan for unique cell phones in a specific range and log the unique phone ID and timestamps/ping (distance) from the raspberry pi and store in mysql database using cellular adapter.

...on a Raspberry Pi. The outcome should be displayed on an LED. The following are the key requirements for this project: - **LED Display Design:** I don't have a specific design in mind for the LED display, so I'm open to creative suggestions. It would be great if the design can enhance the user experience and make the game more engaging. - **Programming Language:** I'd prefer the game to be developed using Python. Please ensure you're proficient with Python and can create a smooth and efficient game. - **Control Mechanism:** I'll need the game to be controlled via a web interface that's accessible through a network. This is essential for user interaction and convenience. Ideal skills and experience for this project include: - Proficiency in Python -...

...can see that the section to monitor for changes is the one highlighted in blue. What I need to know is which HTML code should be copied from the website in order to monitor it and add it to a new flow. (attached the example) Provide a list of required dependencies and instructions for setting up and configuring the flow, including Telegram bot integration, so I can install/configure them on my Raspberry Pi. Important: MAX BUDGET 45€ - No Dummy Offers . Please don't send me dummy offers just to make the initial Contact and then ask for more money....

I'm in need of a Python application that can connect around 200 Android and iPhone devices to a PC via USB cables, allowing me to perform various automated tasks and workflows on them. Key Requirements: - **Bulk Control**: The app should be able to interact with all connected phones simultaneously. I should be able to create and assign tasks to each phone individually, or define tasks that apply to all devices. - **Task Automation**: I need the app to automate several types of tasks, which include: - Web browsing or searches: The app should be able to instruct the phones to browse certain websites or perform specific searches. - App testing or usage: The app should be capable of launching and interacting with various applications on the phones. - Content downloading or u...

I am planning to use 1.69" LCD Display Module (240x280) with raspberry pi 5 to draw animated eye … I am looking for a developer to help me in 1- setting up the screen to work with raspberry pi 5 like this :RPI_for_1.69_lcd_module 2- setting python on my raspberry 3 - write a python code to draw animate eye like this I will give remote access to my raspberry pi 5 and the developer should install everything live to my items.

...a fitness rig that involves real-time human movement tracking. The system should be a combination of microcontrollers and computer vision technology, specifically using Arduino boards and Raspberry Pi. Key Requirements: - Real-time Movement Tracking: The primary functionality of the system is to track human movement accurately and in real-time. This involves capturing and processing data on various physical activities. - Minimalistic and Functional Design: I envision a setup that is small, lightweight and unobtrusive. Skills and Experience Needed: - Proficiency with Arduino boards and Raspberry Pi is a must. - Experience with computer vision, machine learning and human movement tracking is highly desirable. - Understanding of fitness or sports technology woul...

I'm looking for a talented Kivy designer to help me bring my application to life on a Raspberry Pi. Key requirements: - Designing user interfaces: My ideas are solid but I need someone who can make them a reality on screen. - Creating interactive buttons and widgets: The application needs to be intuitive and user-friendly. - Integrating code with the UI: The successful applicant will be able to help me to integrate the back-end code with the user interface. Ideal skills and experience: - Proficient in Kivy: As a Kivy designer, you should have experience in developing applications on this platform. - User interface design: You should have a strong portfolio of previous user interface designs that you can draw upon. - Attention to detail: A keen eye for detail is essential in ...

...can see that the section to monitor for changes is the one highlighted in blue. What I need to know is which HTML code should be copied from the website in order to monitor it and add it to a new flow. (attached the example) Provide a list of required dependencies and instructions for setting up and configuring the flow, including Telegram bot integration, so I can install/configure them on my Raspberry Pi. Important: MAX BUDGET 45€ - No Dummy Offers . Please don't send me dummy offers just to make the initial Contact and then ask for more money....

...requirements: - The logo should have a modern style, with an emphasis on sleek design. - It should incorporate a USB symbol as the main element. Ideal skills and experience: - Proven experience in modern logo design. - Ability to create a design that is both visually appealing and suitable for a car. - Understanding of gaming culture and symbolism would be a plus. This project is a great opportunity for a creative designer who is passionate about gaming and modern design. Your work will be prominently showcased on a unique car within a popular GTA server. Attached is the inspiration for the car logo. I want to remove all the words and blue back ground. I like the little face in the usb head. I also want the wire to have a little squiggle or bend in it to add depth. Thi...

...on a Raspberry Pi. The outcome should be displayed on an LED. The following are the key requirements for this project: - **LED Display Design:** I don't have a specific design in mind for the LED display, so I'm open to creative suggestions. It would be great if the design can enhance the user experience and make the game more engaging. - **Programming Language:** I'd prefer the game to be developed using Python. Please ensure you're proficient with Python and can create a smooth and efficient game. - **Control Mechanism:** I'll need the game to be controlled via a web interface that's accessible through a network. This is essential for user interaction and convenience. Ideal skills and experience for this project include: - Proficiency in Python -...

it should have a file with , , , etc.

I need a skilled person to help me create a bootable USB for Windows 11. I'm on Mac and need this to be Windows 11. Please let me know how long this will take.

...a fitness rig that involves real-time human movement tracking. The system should be a combination of microcontrollers and computer vision technology, specifically using Arduino boards and Raspberry Pi. Key Requirements: - Real-time Movement Tracking: The primary functionality of the system is to track human movement accurately and in real-time. This involves capturing and processing data on various physical activities. - Minimalistic and Functional Design: I envision a setup that is small, lightweight and unobtrusive. Skills and Experience Needed: - Proficiency with Arduino boards and Raspberry Pi is a must. - Experience with computer vision, machine learning and human movement tracking is highly desirable. - Understanding of fitness or sports technology woul...

...to two very small speakers. The sound file would be a siren with an intermittent horn. I can compose the sound file myself and load it onto the Arduino. There should be a separate potentiometer to control the sound volume. It would be nice if the battery could last an hour or so on a full charge. Once installed into the fire truck, the battery should be able to be recharged through the onboard USB port so as not to have to remove it from the fire truck. Obviously, this would all have to be very small. I have measured the width of the Arduino MKR Zero (about 1") and it should fit within the fire truck no problem. There is limited space above the board for the battery, motor and speakers. Skills and Experience Required: - Expertise in Arduino circuitry and programming. - Pas...

...advantage of its many connectivity options including BLE, Zigbee, and Thread. The ePaper display itself will be the Pervasive 2.13" display using the ZIF25 connector and SPI protocol. Schematics and additional reference details are attached, please read these carefully to ensure the ePaper display module functions accordingly. It will be powered by two CR2450 button cells, but please include a USB C connector for programming and backup power source. I'll also need a notification LED and a tactile button. The outcomes I'm expecting are: 1. Updated Schematic (i've attached one i've been working on for reference you can start fresh if you want though) 2. PCB design/gerber file 3. BOM spreadsheet with all components Note: I have the EXT 3-1 board and some...

I'm looking for a skillful developer to create a text recognition ( English language) algorithm that can be implemented on Raspberry Pi 4B. The main objective is to develop a system capable of accurately extracting text from natural scene images. Accuracy is essential, with the expected range standing between 88% and 95%. Key Requirements: - Understand the principles of text recognition, and possess the skills in developing a feasible and efficient solution. - Must be capable of programming in Python or similar languages – necessary for integrating the algorithm with Raspberry Pi 4B. - Familiarity with image processing and Raspberry Pi is highly beneficial, though not strictly compulsory. - The algorithm should be versatile enough to function accurately in ...

I am seeking a professional to develop a dual-platform app (iOS and Android) aimed at sports enthusiasts. This app will be connected to a Raspberry Pi, programmed to start recording video footage when a button is pushed. The app's features include: - Live streaming - Video recording and playback - Downloading video While I have a CCTV camera and a button, I need assistance selecting the Raspberry Pi and setting it up. Ideal candidates should have strong experience in mobile app development, Raspberry Pi coding, and have a knack for creating user-friendly interfaces for sports enthusiasts. Knowledge in video recording, playback, and streaming technologies is also required. If you have relevant experience and you're interested in creating an app of this na...

I'm looking for a knowledgeable and experienced individual to review my technical project, specifically focusing on network security, cyber attacks, and comprehensive testing. Key Requir...my technical project, specifically focusing on network security, cyber attacks, and comprehensive testing. Key Requirements: - In-depth knowledge of network security, cyber attacks, and testing methodologies - Proven experience in identifying vulnerabilities and protecting against cyber attacks - Ability to conduct comprehensive testing and provide detailed reports - Experience working with Raspberry Pi and understanding its security concerns The ideal candidate will have a strong background in cyber security and will be able to provide insights and recommendations to enhance the security ...

...unique project involving Raspberry Pis and AWS Greengrass. Your main task would be to develop a system that allows Raspberry Pis to share updates with nearby devices offline. Key Requirements: - The system should be designed to share updates specifically with other Raspberry Pi devices running Raspbian, offline. - The purpose of sharing these updates is to cater to locations with limited internet access. This is essential for our project as it ensures that the devices can remain updated despite the lack of connectivity. - The system should be able to initiate the update process automatically. This means it should be able to detect nearby devices and share the necessary updates without requiring manual intervention. Ideal Skills and Experience: - Proficiency in ...

I am seeking a talented 3D designer to create a detailed render of a custom case for my Raspberry Pi 4B. The case should be sleek, functional, and selectively display only a few input ports while concealing the rest. * Experience in 3D design, preferably with similar projects completed. * Ability to create an appealing and functional design that fits the dimensions of the Raspberry Pi 4B. * Skill in selectively displaying a few input ports while concealing the rest. * High-quality 3D render of the case from various angles. * Detailed specifications for the case design will be provided. * Creativity and ability to incorporate additional aesthetic details will be appreciated.

We're in search of a talented QT/QML expert who is flexibl...or design type in our initial description, which means we need someone who can easily adapt to various situations and handle tasks efficiently, regardless the parameters. - Skills & Qualifications * Proficient in QT/QML * Can handle different tasks including but not limited to user interface design, data visualization, and database integration * Able to develop compatible software for Raspberry Pi, Windows, and Mac platforms * Familiar with various design preferences ranging from minimalistic to custom We look forward to finding an adaptable and skilled professional who can grow with us as our projects evolve. We appreciate your interest in this role and encourage you to place a bid if you believe you...

I'm looking for a skilled individual to complete the creation of a Raspberry smart home kiosk(home assistant). This will involve setting up a touch screen sunfounder (TS7-PRO). And install Home Assistant Supervised on raspberrypi 4

*Please include descriptions of 1-2 most relevant projects delivered. *Also as part of the offer please provide comments to the 2 questions at the end of this description Linux Raspberry UDP network and serial communication component 1. Product to be done: a basic communication component handling low-volume, ca. 20-100-byte command messages with rather relaxed performance requirements. The messages will be coming on a non-regular basis from a few clients over a Wi-Fi local network, typically say 2 clients. There is no need to confirm the messages in either way. Consequently it seems that UDP is the right protocol to be used (to be confirmed by the contractor). 2. The server should also support its part of a detection mechanism that should allow the clients to automatically detect...

I am in need of an expert to connect a Raspberry Pi Zero W with a 2.4 inch RPi display made by SHCHV Company. Your primary task will be to: - Ensure that the Raspberry Pi Zero W is correctly interfacing with the 2.4 inch RPi display - Set it up to display I have tried but the screen is always white- images attached. Ideal Skills: - Extensive experience with Raspberry Pi (especially Zero W model) - Proficiency in programming languages used with Raspberry Pi - Knowledge of real-time data display methods - Familiarity with SHCHV Company's 2.4 inch RPi display

I'm in need...for integration in an existing device that is currently utilizing a ESP32-C3 Supermini Dev Board Key functionalities should include: - Bluetooth connectivity - GPIO pins configuration - ADC Input - USB-C Female Plug - Serial TX and RX IO - Ten (10) GPIO functionalities This blueprint will serve as the basis of a prototype I am developing. As such, I'm seeking to partner with someone who is experienced and proficient in the following areas: ESP32-C3FH4 development and configuration including the following features: - Bluetooth connectivity - GPIO pins configuration - ADC Input systems - USB-C connection. - Serial Comms Please ensure your proposal reflects your ability to fulfil these requirements. Also please do NOT ask to conduct business outside...

I'm seeking a programmer adept in Raspberry Pi to create a system that plays a video upon pressing a physical button. The technical specifications include: - Using a push button activating video playback - The Raspberry Pi device pulls video content from an external USB drive. Experience in handling Raspberry Pi systems and programming for hardware interaction is integral for this project. Familiarity with video playback processes would be highly advantageous.

I'm looking...already installed and functional on a Raspberry Pi4. Key Tasks: - Configure the ShellyUNI wireless sensor to accurately transmit 0 to 12 DC volts. - Set up a system that enables data transmission every minute from the sensor to the Node-Red. Skillset Required: - Excellent knowledge of IoT - Extensive experience with MQTT, specifically using Mosquitto broker - Familiarity and hands-on experience with Node-Red on Raspberry Pi - Previous work with ShellyUNI wireless sensors The ideal freelancer for this project should have hands-on knowledge of working with ShellyUNI sensors, MQTT brokers, and Node-Red flows. This specific project requires prior experience in setting up accurate data transmission between wireless sensors and Node-Red. Familiarity with ...

I'm looking for a skilled Raspberry Pi programmer to create a program focused on data logging. Key Requirements: - Develop a program that can log data efficiently on a Raspberry Pi - The program should be able to integrate with various sensors - The primary goal is to replicate an existing Raspberry Pi setup Ideal Skills: - Proficiency in Raspberry Pi programming - Experience with Python, as the primary programming language for the project - Previous projects with data logging and sensor integration - Strong problem-solving skills and attention to detail

I am searching for an accomplished electrical engineer and coder who possesses advanced technical abilities in circuit design, analysis, and programming microcontrollers, namely with Raspberry Pi. These skills are necessary for the fruitful completion of the project. Key Responsibilities: - Design creativeness is a must as I place an emphasis on compact-sized micro-circuits. - Robustness is critical in order to effortlessly connect to external devices. - Implementing GPIO pins for sensor integration requires comprehensive expertise. - Responsibility includes diagnosing and troubleshooting electrical systems when the need arises. The successful freelancer will ideally have substantial experience in Python as this is the preferred programming tool for this project. The end goal is ...

...require a software solution that can extract and unlock full calibration data from a sensor for further analysis. The software must have the ability to interact with the sensor via USB connection. Key Features: - should be able to fully extract the calibration data from the sensor - the tool should be user-friendly and have a clear interface - the software should have a USB connection for the sensor - the software should be able to output the data in a readable format for further analysis Ideal Skills: - Proficiency in software development - Experience in sensor calibration and data extraction - Familiarity with USB connections and software interfacing - Strong understanding of data analysis and presentation The project will require a combination of technical and...

In Node-Red Monitoring specific "HTML div elements" from different web pages. (different flows) So, the idea is to identify when there is any change in the DIV section of the webpage (every "x" seconds) and notify that there is a change (it's not needed to show what was the change) Just sending the hyperlink by Telegram including the subject of the flow when ther... I need to know how to create new flows in order to change them or create new flows. (just explain me how to create new flows) -So explain the configuration of new monitoring flows, enabling addition of new web pages/specific HTML elements. Provide a list of required dependencies and setting up and configuring the flow, including telegram bot integration so I can install/config them on my Raspbe...

I am in need of a proficient C++ programmer who can create a sof...am in need of a proficient C++ programmer who can create a software for Windows operating system that will effectively detect specific events when a USB device is plugged in. Registry Scrubber Key Features: - The software should monitor and identify the type of device that is connected to the USB port. - It should have capability to store this device data and send using RS-232 to an external MCU - It should also detect and monitor when a device is removed from the USB port. Skill Requirements: - Proficiency in C++ programming. - Experience in developing Windows-based applications. - Understanding of device interaction with Windows OS via USB. - Previous experience in creating device detectio...

I have three python codes in my raspberry pi which needs to be executed at the startup (when the pi is booted). one code involve USB camera, another codes is related to playing video via VLC media player and the third code is a counter that sends the data to a cloud. All the codes are working perfectly, they are even working when they are executed simultaneously, but the only thing is that the USB camera code is not working at the startup. If you want me to chat with you, start the bid with "pi" We have tried a lot of methods, but still no success, I believe it is because we are using raspberry pi 5, there are limited resources and libraries for it online. Please help me with this. Thank you.

...similar update mechanisms or version control systems. Caveats: Existing IoT solutions that run scripts which require specific kernel modules are known to NOT work in our Linux environment; eg. mender, amazon iot, snapd won't work; however golang programs are known to work. The program needs to be in Go The size of the program needs to be within reasonable limits to be able to run within a raspberry pi environment. = Must be based in the UK = Must have identify verified = Must communicate via freelance only = No off-platform work or transactions This project is ideal for a developer who is adept at navigating the constraints of secure, restricted environments and leveraging Golang's capabilities to build comprehensive, secure update mechanisms. If you are looking to...

I'm seeking a skilled Linux developer to assist with customizing the boot loader on my Raspberry Pi 4 and Solid Run Cube devices. The primary goal of this customization is to enable dual boot functionality. I want the system to automatically choose the platform image I wish to boot into. Ideal Skills and Experience: - Proficient in Linux system development - Experience in customizing boot loaders on Raspberry Pi - Familiarity with dual boot setup - Strong understanding of SD card behavior on Raspberry Pi - Strong problem-solving and communication skills Your role in this project would involve: - Understanding the current boot setup on my Raspberry Pi 4 - Implementing a dual boot solution with a selection screen - Ensuring seamless transition a...

My project requires implementation of real-time video communication using golang WebRTC Pion. This application is targeted for Desktop and IoT devices. The software should be designed to operate on low-resource ARM-based hardware, such as the Raspberry Pi, with the aim of capturing RTSP streams from an IP camera and relaying them to clients via WebRTC. It will implement a socket-based protocol to communicate with an existing Node.js middleware, which will interface with the software developed in Golang. We currently read RTSP stream and manage WebRTC gathering. But there are some connection issues and improvement to do. Key Features: - Support for Selective Forwarding Unit (SFU) to handle communication Ideal candidates should have: - Proficiency in Golang programming language - ...

I have a xenserver with four windows virtual machines. it is installed in a DELL server with RAID. A electricity failure damage the boot and got the grub rescue console. I load ubuntu from a usb and can see the lvm partition, but can copy. So I need some one to help me to copy the virtual disk to other xenserver instalation to load the fout virtual machines.

...of beverages. The project includes four categories, each containing several flavors. Beverage Categories and Flavors: 1. Mineral Water (Non-carbonated) 2. Flavored Mineral Water: - Mint - Lemon - Watermelon-Melon 3. Juice-Containing Drink: - Apple - Cherry - Peach - Watermelon - Orange-Tangerine - Pomegranate (future addition) 4. Tea Drink: - Mango Chamomile - Raspberry - Lemon - Peach - Green Feijoa Design Requirements: - Style: Minimalistic. - Must include the company logo. - Differentiation: Each label should be visually distinct yet cohesive with the overall brand. - Color Scheme: Turquoise, blue, and white. - Label Dimensions: 65mm x 198mm. Compliance and Legal Requirements: - Include mandatory information such as nutritional fact...

I want an Android app for serial communication (like Hyperterminal). * Well documented source code of the app will be provided. * App will be capable of sending and receiving (i.e. full-duplex) serial data via OTG cable with RFD900A device. * The send and receive will be handled simultaneously. * Received data will be d...38400, 57600, 115200, 256000, Custom) , data bits (5, 6, 7, 8 bits), parity (None, Odd, Even, Mark, Space), stop bits (1, 1.5, 2), handshaking (None, RTS/CTS, XON/XOFF, RTC/CTS+XON/XOFF, RTS on TX) etc.) * App will be written in C++ using Qt. * GUI will be prepared in QML. * GUI will be designed to run both on Android phones and tablets. * For USB-to serial comms, app will use "mik3y/usb-serial-for-android" utility from ""

I'm seeking a proficient developer with experience in Raspberry Pi Pico, USB ethernet programming, NTP (Network Time Protocol) clients, and web server development. Integrate existing open source libraries to achieve the following objective. - Project is completely hosted on a Raspberry Pi Pico board using Arduino IDE, FreeRTOS, and libraries. - Creates an Ethernet endpoint when USB is connected to a Fedora Linux host PC. - NTP client enabled to obtain accurate Global time synchronization. - Web server with a single page offered which display a "Hello World" page with current date and time, and a drop down box where the host can set the time zone. This RPI Pico web page is accessed from FireFox on the Fedora Linux host.

I'm looking for someone to help me build a simple GPS tracker device. It should be compatible with a self-made device that supports Bus Plug and Play, and transmit data over Cellular (GSM/LTE). Key Requirements: - Device should be suitable for vehicle tracking purposes. - Must be able to transmit data over Cellular (GSM/LTE). - Compatible with a self-made device that supports Bus Plug and Play. The ideal candidate should have experience with: - Building GPS tracking devices. - Working with Cellular (GSM/LTE) communication protocols. - Understanding of vehicle tracking applications. Please share your previous relevant experiences and your proposed approach for this project in your response.

...freelancer to build a SLAM system, leveraging Raspberry Pi 5, 2D Lidar and Arduino Uno/MKR 1010 WiFi as part of my college project. Key responsibilities will be to aid in motor control and visualizing real-time Lidar data. Specific requirements include: 1. Implement FastSLAM algorithm – You will need to have a thorough understanding and experience in implementing this particular SLAM algorithm. 2. Utilizing Python – All coding tasks should be performed using Python. 3. Deliver Real-time Lidar Data Visualization with: - Map Display: A real-time map should be drafted using the Lidar-scanned data. - Moving Trajectory: Display the accurate position and movement trajectory of the SLAM system. Having a background in working with Raspberry Pi and Arduino,...

I am seeking a skilled freelancer to assist with prototyping a mobile application using Jetpack Compose in Kotlin. The core functionality of the app revolves around connecting to and interacting with Raspberry Pi Picos. App Functionality: * Wi-Fi Network Listing: Upon launch, the app will display a list of available Wi-Fi networks on the user's device. * Pi Pico Detection: The app will filter the listed Wi-Fi networks to identify those specifically broadcast by Raspberry Pi Picos. * Connecting to Pico Wi-Fi: The user can select a detected Pico network, and the app will establish a connection to it. * Interaction with Pico (not needed): There are existing functionalities within the main app to interact with the Pico once connected. This functionality does not need to be...

I am looking for a proficient developer who can help me create an Edge Impulse gateway on a Raspberry Pi. The primary goal of this project is data collection using accelerometers and gyroscopes as the primary sensors via industrial protocol such as OPC UA Server or Modbus/TCP Server & MQTT. Key Responsibilities: - Develop and deploy the Edge Impulse gateway on Raspberry Pi for data collection. - Configure the gateway to work seamlessly with accelerometers and gyroscopes. Ideal Skills and Experience: - Proven experience in developing Edge Impulse gateways, especially on Raspberry Pi. - Strong knowledge of working with accelerometers and gyroscopes. - Solid understanding of data collection and edge computing concepts would be a plus. If you have the required

I'm looking for an experienced IoT developer who can create an Arduino-based system that triggers actions or alerts based on scraped text data from a website. Key Responsibilities: - Develop a system using Arduino, Raspberry Pi, and ESP32 microcontroller - Implement website scraping functionality to extract specific text content - Design a mechanism to trigger predefined actions or alerts based on the scraped data Ideal Experience: - Proficient in Arduino programming - Familiarity with ESP32 microcontroller and Raspberry Pi - Experience with website scraping techniques - Ability to integrate scraped data to trigger actions or alerts on an IoT system Please note that my preferred programming language wasn't specified. Feel free to suggest the most appropriate lan...

I'm seeking a skilled developer to upgrade my Raspberry Pi setup into a Home Assistant kiosk with additional functionality. The ideal candidate should have experience with Raspberry Pi configurations, Home Assistant, and touch screen integration. This project involves reconfiguring SSH access, setting up a GUI environment, integrating a touch screen (TS7-PRO Sunfounder), and creating customizable Home Assistant dashboards. The developer should also address any missing configurations and troubleshoot issues related to the existing kiosk setup. If you're well-versed in Raspberry Pi and smart home platforms, and enjoy creating interactive interfaces, I'd love to hear from you. Please provide your experience with similar projects and a timeline for complet...