Kinect Experts and Microcontroller Developers For Hire

  • Kinect
  • Microcontroller
Suggestions:
more

Countries

Specific Location

Exams

Hourly Rate (USD)

Rating

Online

  • Hire mechatronicsengr
    6.1
    47 reviews $25 USD per hour
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory...
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory Automation and Remote Inventory Management. - RFID Based Loyal Card for Loyal Customers. - Bluetooth Communication between MCU and RFID Host. - Vehicle Tracking using GPS and Accelerometer. and a lot more. I have expertise over all communication protocols of Microcontroller: - SPI (Master/Slave) - UART - USART - I2C (Master/Slave). - Ethernet - Wifi - Bluetooth etc.. I am expert in interfacing sensor modules with microcontroller. I believe in providing superb quality provided that the deadlines are met. Moreover, during the course of my project I would keep you updated regarding the status. Service Description: * Wireless Interfaces (ISM Band FSK, OOK, XBee, ZigBee, TI 2.4GHz, Bluetooth, WiFi, etc) * LED lighting control * DC Motor Control and Actuator Control Solutions * Touch Sense * RF Energy Detection Systems * Home Automation systems * Weather Stations (Temperature, Pressure, Humidity, Wind Speed, Positioning, and Ambient Light sensing) * GPS Tracking Systems * USB Based Embedded Products * Power Over Ethernet (POE) Solution * On Board / off board DC/DC Low quiescent current, Linear and Switch Mode Power Supply solutions for embedded applications ----------------------------------------------------- * PCB Design (Printed Circuit Board) * Schematics and Bill of Material * Block Diagram and Design Documentation * Suggesting you PCB and PCBA vendors or managing the PCB and PCBA process. * Part Selection, Parts Sourcing * Manufacturing File generation * High Speed, High Density Multi-Layer PCB Layout * Embedded Software / Firmware design development * 3D Step Models of the PCB for Integration with MCAD tools. * Board Bring-up: Test codes in C/C++. * DSP Design (Digital Signal Processing) * Power / Signal Integrity Analysis * System / Hardware Design -------------------------------- * Circuit Simulation Training using Altium, MultiSim and Proteus * Embedded Firmware Design Training (C/C++, Assembly) * Schematics and PCB Design training less
  • Hire hayat38402
    3.8
    3 reviews $25 USD per hour
    Hello, how are you We are a team of experts in different fields e.g --->Electrical & Electronics Engineer --->Civil Engineer --->Mechanical Engineer --->Chemical Engineer --->Software Engineer --->Graphic Designer ******Software proficiency******* • MATLAB/SIMULINK • Arduino • esp8266 • Python • Eagle/ALTIUM...
    Hello, how are you We are a team of experts in different fields e.g --->Electrical & Electronics Engineer --->Civil Engineer --->Mechanical Engineer --->Chemical Engineer --->Software Engineer --->Graphic Designer ******Software proficiency******* • MATLAB/SIMULINK • Arduino • esp8266 • Python • Eagle/ALTIUM Designer • PROTEUS • PLC/SCADA • HFSS • AutoCAD • SolidWorks • ANSYS • Adobe Photoshop • After Effects We provide services in following writing fields 1-Report Writing 2-Creative Writing/ Article Writing 3-Copy-writing 4-Web Content 5-Academic Writing Gaining your trust is vital for me because I want to make friends on freelancer. I am available 24/7 and can start your project as soon as possible. If interested please contact me to talk in more detail about the project and define our milestones. less
  • Hire sukhoi1
    6.4
    41 reviews $40 USD per hour
    I am a Senior Embedded and Automation engineer. I have a long background in these fields plus 10 years' experience in embedded system and more than 5 years in automation engineering. I have worked in OLIMEX (www olimex com) as a hardware designer for a few years. I have designed more than 300 products which...
    I am a Senior Embedded and Automation engineer. I have a long background in these fields plus 10 years' experience in embedded system and more than 5 years in automation engineering. I have worked in OLIMEX (www olimex com) as a hardware designer for a few years. I have designed more than 300 products which found a good market around the world. I have a very good knowledge in circuit design and step by step processing for manufacturing and mass production. My team is one of the first teams who has done many projects with ESP32. We have done 2 projects as well with complex A20 Linux custom boards successfully. Skills: Professional in Eagle CAD IoT, esp32 Wroom, esp8266, A20, A13, ?10, pic32, pic18, FPGA, Https servers, Embedded Web servers, cpu1200 Epaper displays. - Siemens automation - PLC (cpu315, cpu 1200) and HMI (Comfort Panels) - Lenze automation - PLC (controller 3200C) and HMI(p300) less
  • Hire raulbehl
    5.5
    45 reviews $25 USD per hour
    I am currently working as a Design and Verification engineer at a leading Processor Development firm. My skills set include: i) Matlab/LabView/Logisim ii) Engineering Mathematics iii) Assembly (ARM, MIPS, PLP, x86, MARIE and pep/8) / Computer Architecture iv) Verilog/System Verilog/UVM v) Raspberry...
    I am currently working as a Design and Verification engineer at a leading Processor Development firm. My skills set include: i) Matlab/LabView/Logisim ii) Engineering Mathematics iii) Assembly (ARM, MIPS, PLP, x86, MARIE and pep/8) / Computer Architecture iv) Verilog/System Verilog/UVM v) Raspberry Pi/Arduino/TMS320C5535 eZdsp/TM4C123 vi) PSpice vii) C/C++, Qt, Python viii) Perl Happy to help! :-) less
  • Hire ched41
    6.2
    33 reviews $15 USD per hour
    I am an Experienced embedded developer with more than 5 years experience in microcontroller firmware development and electronic hardware prototyping. I specialize in firmware development for IoT and Automation applications. personal site: https://daviduche.com Core Skills: C / C++ , ...
    I am an Experienced embedded developer with more than 5 years experience in microcontroller firmware development and electronic hardware prototyping. I specialize in firmware development for IoT and Automation applications. personal site: https://daviduche.com Core Skills: C / C++ , Python, ARM CORTEX M-family Programming (C / C++ ), Arduino and Arduino compatible systems firmware development, x86 Assembly, MIPS Assembly Platforms: STM32, NXP Series, Arduino, Atmega, Raspberry PI, ESP8266, IDEs: IAR Systems, mBED, KEIL, Arduino IDE Internet Protocols: TCP/IP, MQTT, HTTP, UDP Front-end Frameworks: NodeJS (node-red), Ionic Framework less
  • Hire levstremetskyi80
    6.0
    23 reviews $35 USD per hour
    ⭐ ⭐ ⭐ ⭐ ⭐ I am a senior embedded system engineer and I have a good experience in pcb design and firmware programming. I have been working in this field for 8+ years. ✔️ My top skill is here : ✔ PCB design ✔ Product 3d design ✔ Manufacturing ✔ Firmware programming ✔ Android and iOS App development ✔ ...
    ⭐ ⭐ ⭐ ⭐ ⭐ I am a senior embedded system engineer and I have a good experience in pcb design and firmware programming. I have been working in this field for 8+ years. ✔️ My top skill is here : ✔ PCB design ✔ Product 3d design ✔ Manufacturing ✔ Firmware programming ✔ Android and iOS App development ✔ MATLAB/LabView ✔️ My experienced field: ✦ Altium Designer, Cadsoft Eagle, Cadence Allegro, OrCAD, Arduino, Keil vision, MATLAB, Quartus II, Xilinx ISE/Vivado, CCS ✦ ARM cortex M, A, H serious (stm32f, allwinner, freescale imx, qualcomm snapdragon, ...) ✦ Texas Instrument DPS (tms320c2000, c5000, c6000, msp430, cc1310, etc) ✦ Atmega and dsPIC, etc ✦ FPGA (altera, xilinx, lattice, actel) ✦ IoT (Bluetooth Low Engergy (BLE), WiFi, LoRa, RFID, Wireless, GSM, GPS, ... ... ) ✔️ Interesting area : Military/Industrial/Medical wearable device development I believe to assist you in pcb design, firmware programming, product 3d design and manufacturing. Thanks less
  • Hire DamithaKD
    5.8
    23 reviews $20 USD per hour
    About the company. We Are a small Company specialized in electronics engineering, Firmware development and Software development. We have 3 Software Developers, and 2 Electronics Engineers. We have Over 12 years experience in Electronics and software development.We have perfect reviews on all my projects. We have an...
    About the company. We Are a small Company specialized in electronics engineering, Firmware development and Software development. We have 3 Software Developers, and 2 Electronics Engineers. We have Over 12 years experience in Electronics and software development.We have perfect reviews on all my projects. We have an experience in MicroController programming ( MikroPascal and MikroC), Digital Electronics, Analog Electronics, PCB Desing (Altium and ultiboard), MATLAB and Power electronics. Software Development in Delphi, Java, C++. We have developed Android,iOS and Linux Applications and Web Development. About Me. I am a programmer / Electronic Designer for 12 years and I am a Expert in Delphi and Scjp, I have a Diploma in Electronics and in Electrical and B.Tech in Electronic and Electrical Engineering ( NITW ), India. We can give you a perfect project. Feel free to contact us. and Feel free to check out our reviews :) less
  • Hire erenss
    2.4
    6 reviews $15 USD per hour
    I am experienced digital designer /software developer. I worked especially with various FPGAs in big projects. I mainly write VERILOG and VHDL codes
    I am experienced digital designer /software developer. I worked especially with various FPGAs in big projects. I mainly write VERILOG and VHDL codes less
  • Hire greusser
    5.0
    2 reviews $25 USD per hour
    I consider myself to be something of a jack of all trades. I love to explore new ideas and solving them with electronics which often means I seek new knowledge in many areas adjacent or outside computer engineering. I have experience including but not limited to: -PCB Layout -High power circuitry -Audio...
    I consider myself to be something of a jack of all trades. I love to explore new ideas and solving them with electronics which often means I seek new knowledge in many areas adjacent or outside computer engineering. I have experience including but not limited to: -PCB Layout -High power circuitry -Audio circuitry -Microcontroller design and programming -FPGA/ASIC design and testing -Electromagnetics -UI/App development -Networking and Cloud services I also own a 3D printer, CNC machine, and Laser Engraver/Cutter which can be used for prototyping. less
  • Hire xiaoqideng
    4.8
    20 reviews $30 USD per hour
    Dear Client. Thank you for your kindly visiting to my summary. As High-Skilled Embedded System Designer, Developer and Manager, I have full experience and rich knowledge of Embedded System Development. 1) Rich Schematics and PCB designer. - Over 10 years designing experiences using Altium Design Tool and Simulation...
    Dear Client. Thank you for your kindly visiting to my summary. As High-Skilled Embedded System Designer, Developer and Manager, I have full experience and rich knowledge of Embedded System Development. 1) Rich Schematics and PCB designer. - Over 10 years designing experiences using Altium Design Tool and Simulation Tools. 2) Firmware Development Experiences. - Rich knowledge and experiences at C/C++/Embedded C. - I like using various of MPU, ARM, PLD and embedded system equipment. MCUs : STM32 family, PIC16F/18F/33F, Atmega family, 8051 family, NRF51822/52832, MSP430, LPC, Atmel, CC2540/CC2541, CC3200, MPU6050, Wifi-MCUs : ESP8266/ESP32. Arduino Linux-Embedded: - Experience with Keil, IAR, Atmel Studio, QT IDE, Arduino, Visual Studio. - Rich experiences at variant peripherals. UART, I2C, SPI, USB, Ethernet, Bluetooth, Wifi, Gyro/Accelometor, GPS, GSM/GPRS, xBee, Zigbee. - LED controlling wih Neopixels. I'm always work on my client's timezone. Thank you for your time. less

Hey , here are some offline freelancers

Hey , here are some offline freelancers matching ""