Find Jobs
Hire Freelancers

Car Bezel bending for tablet (to look stock)

$30-250 USD

Closed
Posted almost 10 years ago

$30-250 USD

Paid on delivery
I am in need of a model that will show details on how a shop would mold a custom car bezel for me. I have provided in the PDF attached the dimensions of the tablet that will need to be blended into the bezel and the bezel itself. The "bezel" of which i will be referring to it here is the grey area that you see in the PDF images. It is what covers the areas around the radio, air vents, A/C control knobs and other things. I am looking to make it look like it was bought like that from factory so no open areas that the user in the car could see. However, the design needs to be made so that it will hold the tablet in place (from the back side) and can be removed if needed so a bracket system should show on the backside how the tablet is held in place (taking the bezel out and removing the tablet from the back - NOT - being slid out from the left or right to remove it - that would NOT make it look stock looking if there's holes on either the left or right side of the tablet area). The tablet should start at the top right under the air vents. Slightly below the air vents are the knobs that move the air vents fins left and right. This can be covered (as show in the images) as this can be controlled by me using my finger to move the fins. The tablet being used for this is the Dell Venue 11 Pro found here > [login to view URL] The bezel is from a 2011 Dodge Nitro. It's the center dash panel that house 2 air vents, the radio, A/C controls and a cigarette lighter and beside that a few buttons that do stuff. I have placed all dimensions for the tablet and bezel to the best of my knowledge. Again, i'm just looking for a nice render/3D model that shows the tablet blended into the bezel so it looks natural. I am going to take this rendering/3D model to the shop so they can get a better idea of what i am looking for instead of trying to tell them what i am looking for. In the PDF, pages 1-3 show the dimensions of the tablet and bezel. Pages 4-8 are just mock-ups of a 10" tablet sitting on the bezel to show the size and overall look it would look like (sticking outside the bezel area, etc). This is just to give you an idea of how a tablet of that size would look on the bezel. Page 10 is an inside look at the bezel area without the panel on it. And page 11 shows the bezel as it currently looks in the car (radio, etc). You may render this in any 3D program of your choice as long as i can use a viewer to view and spin it around to show the front and the back. The bezel itself is the color silver/grey. The outer area of where the bezel sits in is a texture of dark grey (both of these you can see in the PDF on page 11). Of course the winning bidder should be great at doing 3D models. It's also a plus if they have done parts for cars in the past so that they are already familiar with how to layout something in the automotive industry and have it look factory. This is a simple project and i don't see needing to spend hundreds to have it done. ****This render/3D Model will NOT be used to make the bezel itself. It's only purpose is to give the shop a visual on how to use the current bezel i have and mold the tablet into it and how the overall look (stock) should be like.****
Project ID: 5740857

About the project

14 proposals
Remote project
Active 10 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
14 freelancers are bidding on average $232 USD for this job
User Avatar
Hello sir, i have read the project details and understood the requirement, my skill is matching to your requirement, i have 17 years of experience in design and manufacturing, my expertise is product design, plastic injection mold design and reverse engineering. i worked for various company in automotive design, i worked on bumper, mirror ambilesher, toy eye cover, etc. Thanks Uday
$618 USD in 13 days
4.7 (56 reviews)
6.2
6.2
User Avatar
A proposal has not yet been provided
$388 USD in 14 days
5.0 (12 reviews)
6.1
6.1
User Avatar
Hello, We are Shroom Studios specializing in Animation, Vfx and Advertising. We have a pool of some really wonderful and talented artists for 3d Production. This project will take 3 days maximum We have some really talented artists who have a deep under standing of form and anatomy. We, at Shroom Studios, have a really strong 3d Production Team which understands the importance of delivering results within deadline. Looking Forward to work with you. Regards, Shroom Studios
$200 USD in 3 days
5.0 (9 reviews)
4.3
4.3
User Avatar
Hi, I have more than 7 years of experience in this industry. I am comparatively new to freelancer.com. I only completed few jobs like yours till now. But all clients are amazed by my work and they have given feedback which are proof of my words.I bid to make something really creative. Please hire me...thanks
$309 USD in 7 days
5.0 (5 reviews)
4.0
4.0
User Avatar
best wishes I've experienced solidworks and autocad to use it for 5 years. often got the job to design the appropriate machine for the surrounding community. I employ paid and the time I have to offer. visit my profile to see portfolio. please send a message to me thank you Ramdani
$61 USD in 5 days
3.8 (1 review)
0.5
0.5
User Avatar
Hi, I am an engineer and I am good in 3D and CAD , I saw your pdf and I believe it is clear. So, I am ready to do it for you, But if you give this job to me, I should check it with you step by step, First to make as you desire and second to finish it on deadline. Please confirm to start the job. Thank you
$155 USD in 3 days
0.0 (0 reviews)
0.0
0.0
User Avatar
A proposal has not yet been provided
$155 USD in 3 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Sir, I am a Mechanical engineer and doing job as a design engineer having more than 6 years experience in this field. my firm is a manufacturing firm in which we manufacture of all types of machine spare parts ( cam, gear, slide, punches etc ) and special purpose machine. special purpose machine is design and manufacture on the client requirement. i am doing designing on solidworks, pro-E, Autocad2013, I am interested in your project and do your project on time... thanks
$222 USD in 5 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Dear Sir, I have experience in same field. I have made design for Eicher Motors Ltd, Swaraj Mazda, Tata Motors for different cabinet parts and machine (plastics) parts. Also made mould design for same products. Ex bezel parts for eicher motor, Doortri. lh/rh, Subtank, radiator fan of various size, colant tank-blow mold, fender, various shapes of DUCT for machine parts, Rainhat LH/RH, Snorkhel duct, Front Grill for tractor --vikas Avhad
$122 USD in 3 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of UNITED STATES
Chattanooga, United States
5.0
16
Payment method verified
Member since Sep 4, 2010

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.