Find Jobs
Hire Freelancers

Control Gyems motors from Raspberry via rs485 HAT

$30-250 USD

In Progress
Posted over 3 years ago

$30-250 USD

Paid on delivery
Purchased a Raspberry pi 4 and Gyems gimbal motors. the Gyems RMD-S-7025 motors use rs485 communication. What I need is some simple coding to test the motors. I have tested the motors via the motors own test app so I know they work but I am now looking to get them working with Raspberry and python code. So if there is someone who understands rs485 protocol and can get raspberry and coding in python to work with the motors that would be awesome. I have a Waveshare rs485 HAT for the Raspberry pi 4. Have tested communication and it works. A simple code I want is to make a motor go back and forth from one end-limit to another end limit. end limits that are less than a motors rotation (adjustable preferably). Adjustable speed. acceleration from start and deceleration to stop before reverse direction. keyboard press key to start and stop. If successful there can be more coding to do to control these motors
Project ID: 26925016

About the project

12 proposals
Remote project
Active 4 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
12 freelancers are bidding on average $149 USD for this job
User Avatar
Hi I am experienced electronics engineer with more than 15 years of experience. I have read the details and would like to know more about it. please get in touch to discuss it further Regards
$250 USD in 7 days
4.8 (210 reviews)
7.8
7.8
User Avatar
Hello, i'm interested in your project . I have experience on RPi, python and also on Servocontrol(PID ....) is what is needed on your project . I'm available to discuss about it. Regards. Zak
$220 USD in 15 days
4.8 (19 reviews)
4.8
4.8
User Avatar
We are a team of Electrical and Electronics engineers and we are Excellent in the following areas: • PCB Designing-Proteus, Eagle. • Python • Embedded C Programming. • VHDL/Verilog • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • Multisim • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Also we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements. We can deliver your project efficiently at a time. If you choose me, I think you won't regret. Best Regards. Also we have good command over REPORT WRITING, We can show you many samples of our previous reports. We can discuss further details in the message box.
$140 USD in 7 days
5.0 (5 reviews)
4.6
4.6
User Avatar
MASTERS IN ELECTRONIC ENGINEERING PYTHON EXPERT!!! HELLO DEAR CLENT. I have read through your project details carefully and I am happy to say that it’s within my area of expertise, having the require skills to undertake the comfortably I will deliver quality work and desire and output by meeting all set guideline. Thanks in advance for considering my bid.
$140 USD in 2 days
4.8 (14 reviews)
4.3
4.3
User Avatar
hello sir.✋ I have just read your job description and your project is really interesting to me. The Items you raised are similar to what I have already done in practice and I think you can do it in a short time if you have a little explanation. I'm an expert having specialization in Electronic Engineering Design. ✔️ Embedded system based on Microcontroller (ATMEGA, AVR, STM8, STM32, MSP430, TMS320, PIC ...) ✔️ Python with Deep Learning, Machine Learning ✔️ Python with Data Science ✔️ A system based on development boards(Arduino, Raspberry PI, Node MCU, Bluechip, Teensy,…) ✔️ Antenna design & Analog circuit/RF communication circuit designing and simulation using Proteus, P-Spice, Tina Pro, ADS, CST, Ansys, HFSS ✔️ Bluetooth, WIFI, zigbee, LoRA ✔️ High-Speed layout using HyperLynx ✔️ PCB layout designing, providing GERBER and BOMs, 3D files using Altium, EAGLE, Kicad, EasyEDA… ✔️ Programming firmware of Microcontroller & C++ ✔️ BMS I think my many design and practical experiences can help you design your project and give you enough satisfaction. I look forward to your response. Best Regards.
$80 USD in 4 days
5.0 (27 reviews)
4.2
4.2
User Avatar
Hey there, I have read your project description for controlling your Gyems RMD-S-7025 motors with rs485 using raspberry pi. Well I have worked on control of motors with limit switches and LCD with Arduino. But I am confident that I can control the motor using raspberry pi as well. I would need few details before me start.
$100 USD in 5 days
4.9 (5 reviews)
3.0
3.0
User Avatar
I think your selected freelancer didn't accepted your award. I have applied knowledge in Embedded System and Electronics. Raspberry via rs485 have look on my review for satisfaction I can complete your work with all of your requirements. I need know more details about your project. Ready to start Work with you! Inbox me and let's talk to get started! C Programming, Microcontroller, Arduino
$140 USD in 7 days
5.0 (3 reviews)
2.0
2.0
User Avatar
Hello, how are you? Our company can carry out your project. We have experience with Raspberry pi 4 and Python programming. We can communicate the Raspberry with the motor. If we are chosen to carry out the project, we will be happy to discuss further details and get started as soon as possible. Best Regards, FR Integrated Solutions
$140 USD in 7 days
5.0 (1 review)
1.8
1.8
User Avatar
I am a profound developer and am happy say that your project details fall under my expertise. There are few doubts to clear before we start the development process, waiting for your response. I am excited to showcase all of my expertise correlating with this project over Chat. Please provide all the information so we can mark the scope of this project. Please check my certifications to estimate my skills. Regards, Saad M.
$140 USD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello, Good day! I am a talented Embeded Developer & I have super abilities in Raspberry pi with 3 years of experience in this field. The output of the project will be completely approved by you. If you are looking for a committed person and the quality of your project is important to you Please send me a message to discuss the details . Thank You Regards
$140 USD in 7 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of SWEDEN
Varberg, Sweden
5.0
1
Payment method verified
Member since Aug 11, 2020

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.