Completed

LED bar design Electrical Engineer needed

Hello

I am looking to design a 5 channels led Bar, 120cm long, 4 cm wide and max 5/6 cm high.

The 5 led channels need to be on the same PCB led module bar. I need the channels to be dimmable independently.

The lamp should have some degree of water resistance.

I need the system to have a main power supply, which then supplies 5 small drivers placed within the led bar, and not occupying lighting surface (therefore must be placed hidden in the bar).

The 5 channel dimmer should be outside the bat and close to the main power supply. Both manual dimming or remote dimming work for me.

It's important that the system achieves an efficiency of at least 94% (that is from the plug to the led only 6% can get dissipated as heat).

It's also important the the cabling is neat, therefore single cable from the bar to the power supply.

The system bar should be made in aluminium and have only passive following, therefore both and drivers and the led chips must be cooled passively.

Each bar is about 50W using Samsung and Osram most efficient led chips.

I will need a design for the led bar (heatsink), a design for the pcb of both the driver and led. (the driver cannot occupy lighting surface, that is 120cm bar must be 120cm of emitting led chips).

Specification for each component.

Please do NOT apply if you don't have experience with led bar development.

I will provide more details in pm.

Skills: Electronics, PCB Layout, Electrical Engineering, CAD/CAM, Lighting

See more: hire electrical engineers, electrical engineering online job, contract electrical engineer, freelance jobs for electronics engineer, electrical engineers near me, freelance electrical engineer hourly rate, how to recruit electrical engineers, freelance electrical design jobs in india, math skills needed electrical engineer, freelance design engineer needed, solar design electrical engineer, electrical engineer design solar systems, solar system design electrical engineer, pcb design electrical engineer, electrical engineer etobicoke designer needed toronto, electrical engineer needed for product, electrical engineer needed, electrical magnetic engineer needed, penn state electrical engineer needed, find freelance electrical engineer to design lightning system

About the Employer:
( 0 reviews ) roma, Italy

Project ID: #27929384

Awarded to:

(28 Reviews)
6.4

21 freelancers are bidding on average €596 for this job

sagradoamicus

Hi I am experienced electronics engineer with more than 14 years of experience. I have designed LED bars before too for automotive and other outdoor applications. Please get in touch to discuss it further Regards

€400 EUR in 5 days
(255 Reviews)
8.0
seshupower

Hi, I am a post graduate power electronics engineer and having very good industrial experience of 8+ years in R&D and project development. I am excellent welding power supplies design, Plasma ARC power supplies, high f More

€2000 EUR in 60 days
(60 Reviews)
6.7
binyameen441

Hello, thank you for your job posting. I read your description about--LED bad design I am a senior electrical engineer. I have plenty of experience in firmware development and micro-controller developments. I can write More

€250 EUR in 1 day
(103 Reviews)
6.4
Andrii0125

Hi. I have good experience with led bar design on aluminum board. Please let me show my previous working to you. I will finish your project in a short time perfectly. Best regards, Andrii.

€500 EUR in 3 days
(17 Reviews)
5.3
doggar302

Hi! I am an Electronic engineer, microcontroller,PCB Layout C programming expert having past experiences with arduino, pic, AVR, chipkit and Texas instruments microcontrollers I am waiting for you over the chat. Thank More

€500 EUR in 9 days
(14 Reviews)
4.6
engrhassanwali

Hello There. How are you doing?. I have read the description, I have great experience doing similar jobs related to these skills Electrical Engineering, Electronics, Graphic Design, Algorithm, Raspberry PI, Micro Contr More

€700 EUR in 10 days
(8 Reviews)
4.3
HarimohanG

Best Electrical Engineer Expert at your service! Dear Client, Please share me your project details. I can design a 5 channels led Bar, 120cm long, 4 cm wide and max 5/6 cm high After going through your project details, More

€500 EUR in 2 days
(2 Reviews)
4.4
syfpr163

Hello Sir. I can design this LED bar. I have 10 years good experience of hardware development. I have completed a variety of embedded system design and programming by using microcontroller, arm, etc Board PCB design h More

€300 EUR in 7 days
(6 Reviews)
4.0
nikitamorozzz

Hi, Dear Client I read your proposal carefully and I noticed what you want. Recently, I have implemented the High Power LED Driver using max25612. Here, I carry the remote dimming control using PIC microcontroller and More

€600 EUR in 7 days
(8 Reviews)
4.0
GERGX

Hello I have 8+ years of experiences in PCB design and layout, firmware programming. PCB layout and schematic capture with Altium, Cadence, Eagle, etc with multi-layer, flexible, high-speed embedded systems Expect me t More

€500 EUR in 7 days
(2 Reviews)
3.7
(5 Reviews)
3.6
zhonghaidi4

Dear, client I checked your description, and I'm sure I can finish this project successfully. I have 20 years experience working as an electrical software engineer. - schematic & PCB design - prototype boards - firmw More

€750 EUR in 6 days
(2 Reviews)
2.7
drfhaust

hi, i can help with out job, I have a lot of experience designing analog and digital circuits, i can get you preliminary design within 5 hours. i design using altium , easy eda. proteus and kicad.

€555 EUR in 1 day
(1 Review)
1.9
superanas777

Hello. I have read your description carefully and I am very interested in your project. I am a professional electrical/electronics engineer and have actual experience in Embedded System Design based on PCB design and More

€750 EUR in 7 days
(1 Review)
1.4
akshayharikumar

Thank you for the invitation to bid. I would be able to help you here with my services. I have close to 10 years’ experience in electronic circuits design. COVID 19 has been tough on me, and apart from the financial h More

€611 EUR in 7 days
(0 Reviews)
0.0
dlongell70

Contact me for Your general hacking services,, I am a general hacker, I do bank to bank ghost transfer, Bitcoin Generator and forest mining, 100% positive result assured. All social media hacking,. Should you suspec More

€500 EUR in 7 days
(0 Reviews)
0.0
EMSCsolutions

Hi Hope you are fine Dear Sir/Madam I am here to provide excellent Services with your happy satisfactions I will provide all needed files can demonstrate each and every part of this work whether on live session or in More

€250 EUR in 3 days
(0 Reviews)
0.0
bouzayeniabdelwa

I am an Electromechanical engineer , I have many skills in 3D design (solidworks , autocad ,catia , ..) , I can suceed your project .

€300 EUR in 2 days
(0 Reviews)
0.0
oleksandr19za

Hello. How are you? I have read your requirement carefully. I have worked as a senior Electronical engineer since 2012. I can build your project perfectly as your spec. I would like to discuss about project more detail More

€1000 EUR in 7 days
(0 Reviews)
0.0
devcuahtle726

Hello, I see you are looking for an electrical engineer who can design the led bar PCB design. I'm a good fit for this project and have developed several kinds of electronic and IoT project before. Here are some projec More

€500 EUR in 7 days
(0 Reviews)
0.0