PCB Design

We need a PCB design with BOM and layout in appropriate files to have samples/prototypes built. We have some pictures of a sample to work from. The design is to incorporate 4 "MPXV7002DP" or an equivalent differential pressure sensor and scale the sensor readings with an output of 4-20mA proportionate to 0-5" W.C. The board should have one shielded RJ45 port in which it will be pinned to receive 24VDC external power and transmit the four (2-wire) 4-20mA signals plus one 24VDC digital signal. A terminal strip will also be required to mirror the RJ45 port for power and signal with an additional feature to split the four 4-20mA signals as (3-wire loop), power, and digital signal for legacy installations. We are opened to the idea of a second RJ45 port instead of terminal blocks for legacy installations, would require a selector or jumpers for either single port or dual port operation. 02/08/2019 Uploaded two additional files; two scenario part layout and function. Scenario (1) - Preferred Add selector switch (SW) to select between two pin out functions. Add second RJ45 instead of terminal blocks, for second pin out function. Scenarion(2) - Les preferred Add selector switch (SW) to select between two pin out functions. Add three RJ45 ports instead of terminal blocks, for second pin out function. ( second pin out function to interlock to legacy controls ) 02/08/2019 Additional information Final product will be housed in a plastic/fiberglass enclosure, installed in both indoor and outdoor environments with a temperature range of -10*C to 40*C.