Find Jobs
Hire Freelancers

I need to create a small PCB

$30-250 USD

Completed
Posted over 5 years ago

$30-250 USD

Paid on delivery
I have attached a document with all the details. I will need the BOM and gerber files.
Project ID: 18226941

About the project

28 proposals
Remote project
Active 5 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
Awarded to:
User Avatar
With over 25 years of electronic design experience I can deliver you a first rate product, quickly and accurately. Since I want to add to my portfolio and increase my review counts, I will do this for you for very low cost and very fast.
$35 USD in 7 days
5.0 (5 reviews)
2.2
2.2
28 freelancers are bidding on average $109 USD for this job
User Avatar
Hi I am experienced electronics engineer with more than 8 years of experience. I can do it for you. I have completed a number of projects here Please review my profile to see the feedback from my previous employers I am waiting for your reply to start Regards
$300 USD in 6 days
4.9 (261 reviews)
8.0
8.0
User Avatar
Hello How are you? I am an electrical engineer and professional PCB designer who has experience in this field and I have done a lot of PCB design projects. I read your attached document. Your project is a piece of cake and I can do your project with good quality and high speed. I have done several kinds of PCB design projects like; - High voltage and high current power supply PCB design - Analog and digital circuit and PCB design - RF high-speed PCB design - BGA based FPGA and DDR RAM PCB design I am here to work with you for this project, so we can discuss the project in detail via chat. Thank you Alexander
$155 USD in 3 days
4.9 (26 reviews)
7.2
7.2
User Avatar
Hello! I'm an electronic engineer with solid experience in PCB design. First of all, the description file is very clear so I do not need more information to do this work. With my fee is includes the schematic, PCB layout and gerber files to production. If you need anything else please ask me. Thanks for reading my proposal and I shop go ahead with this work. Regards
$88 USD in 5 days
5.0 (29 reviews)
6.4
6.4
User Avatar
Dear Sir, I have read your attachment carefully. This is fairly simple project for me. Usually it takes 1-2 days to finish this kind of project. I have did several similar project like this. I have became PCB designer since 2012 and has done lot of projects for various application, from Hobbyst, Robotic, Industrial, IoT, to Military purpose. I see that your circuit actually a two 556 IC coupled with another circuit, I guess it looks like timer isn't it? I see there is no special treatment we need to do for this circuit. I guess 2 layer is enough , and I will use Eagle to design this board. Let me know when I can start working on this project. Let's discuss this further more over chat. Best Regards, Rijal
$130 USD in 2 days
4.6 (86 reviews)
6.7
6.7
User Avatar
....................................................................................................................................
$166 USD in 3 days
4.7 (35 reviews)
6.5
6.5
User Avatar
I have long experience with PCB design. I have worked with low-speed , high-speed and power boards. I use Altium Designer and Eagle, and I deliver neat layout that conforms to your dimension constraints and the manufacturing constraints. You can see samples of my previous work on my portfolio. More to be discussed once you contact me . BR, M.T.
$200 USD in 3 days
4.8 (37 reviews)
6.0
6.0
User Avatar
Hi I am interested to your project. I am familiar with electronics, microcontroller as well as PCB design by Eagle. Thanks.
$88 USD in 3 days
4.9 (94 reviews)
5.9
5.9
User Avatar
Hello. Im designing different electronics devices, mostly based on avr, arm MCUs and boards with them like arduino, stm-discovery etc. (autopromotion^)) Easy and fast task. I prefer to use EagleCad - most common. Result - eagle cad shematic and board files, gerbers for pcb production. DO you want a through hole? SMD is easier to solder( if not very small sizes used) and more reliable cuz no wire outs. Give more info and lets talk. Bid is not final due to lack of detailes for now.
$100 USD in 3 days
5.0 (52 reviews)
5.9
5.9
User Avatar
Hello, I can help you with your PCB projects, I can design the PCB board with eagle software, but maybe, I need more information about your projects, components, deadline, and other things. Deliverable: - Schematic and PCB layout on eagle. - PCB 2D and 3D pictures without components. - PCB view 3D without components on SketchUp. - Add your company logo on top layer. - Gerber Files. - BOM files. If you have any questions feel free to ask and contact me before your order. Thank you, John.
$200 USD in 22 days
5.0 (94 reviews)
5.9
5.9
User Avatar
Profile : ---------- over 14 years of experience in PCB layout design. Expertise in EDA layout tools Pads & Allegro. Over 6 years of experience in Ethernet related layout designs with Electrical interface, Optical interface, PHY device, Switch, Processor, DDR, FPGA, Press-fit Backplane connectors, CPLD. Good knowledge on DFM, DFT and DFA Concepts. Exposure to Product development stages. Knowledge in High speed designs, signal integrity, EMI, EMC concepts. Sound knowledge on Component creation, Design Rule settings, Library management and Customer deliverables with documentation. Educational Background : ------------------------ Bachelor Degree in Electronics & Communication Engineering Layout tool supported : ----------------------- PADS Layout 9.5 (Basic) Pads VX2.1 standard ORCAD PCB Designer 16.6 ORCAD PCB Designer 17.2 Eagle Kicad Schematic tool supported : -------------------------- Orcad Capture 17.2 Pads Dxdesigner VX2.1 standard Eagle Kicad Services Offered : ------------------ Footprint Creation. Netlist Import, DXF Import, Place, Route ,Gerbers and TQ closure. PCB Layout Review. Minimum Required Inputs : ------------------------- A top - level functional block diagram Schematic Netlsit BOM Mechanicals Impedance Information Current Consumption on each voltage rail. Target fabrication house - capability report
$250 USD in 3 days
5.0 (37 reviews)
5.9
5.9
User Avatar
Dear you, I have 6 years experience to design circuit using Altium. I will give you the best result with lowest price
$30 USD in 3 days
5.0 (17 reviews)
4.2
4.2
User Avatar
Hello Employer the project you want to be done I am experienced with it. I am waiting for your response so that I can share my previous work experience about this type of project.
$35 USD in 3 days
5.0 (3 reviews)
3.5
3.5
User Avatar
Hi! My name is Juan, I'm an electronic engineer with experience in PCB design. I've working on RF PCBs and microcontroller boards. I think I can help you with your project, please, contact me if you are interested! PS: Do you have the size of the pads for the female connectors?
$35 USD in 2 days
5.0 (4 reviews)
3.4
3.4
User Avatar
Hi! I can edit the design of the pcb, thanks for attchment document. my job offer is to edit in your specifications with your feedback.
$166 USD in 2 days
3.7 (2 reviews)
2.8
2.8
User Avatar
Having a good Experience in Embedded design and Programming . worked with STM32 ,Arm cortex m4, Arduino, VB.net , Keil Embedded Development Tools ,Simulation software Proteus , With Enhanced knowledge of Communication of GSM,WiFi,Ethernet,Web API,RS 232 ,RS 485 ,CAN, Profibus ,Profinet and other Completed Project of Web Based Temperature Controlling and Data logging,Remote Pressure Monitoring , Motor Speed and Torque Controlling ,Robotic Arm Control system, Home Automation control system ,wireless car control system,Embedded cards to control analog input and output
$55 USD in 10 days
5.0 (1 review)
0.9
0.9
User Avatar
Making PCB is part of my daily job. I use Eagle Software for PCB making. What is the available manufacturing method you have? Single layer or multi layer? For multi layers, I usually send china for manufacturing.
$133 USD in 3 days
0.0 (0 reviews)
0.0
0.0
User Avatar
sir, I have a experience on designing PCB. I already design a PCB for power Over ethernet and also 220 v AC to 12v, 5V, and 3.3V DC. I think if you choose me, I dedicatedly try to do your work with error free.
$100 USD in 5 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I'm a Mechatronics Engineer, I have a lot of spare time the next week and I can help you with this PCB design. I work with eagle software.
$35 USD in 1 day
0.0 (0 reviews)
0.0
0.0
User Avatar
I have experience in the development of PCBs in a professional manner. In this way I am starting and I guarantee the work done. We can talk more about your project in the chat to agree date and start time. Send me a message if you are interested in me collaborating with you.
$253 USD in 5 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello, We are AAASY Corporate, We like your project, We can simulate your project on a simulation environment to verify the circuit is working as it should before designing the PCB layout, We have experience with PCB and Electric/Electronic design. We forgot to mention that we are a group of Senior mechatronics engineering students, you can ask for sample projects in a message if you would like. We can work with any software you prefer (AutoDesk Eagle, Proteus, ..etc) You should expect a very strict deadlines to be met, and very high quality product. We are new to freelancing and we want to prove ourselves and provide high quality standards. Regards AAASY Corporate
$150 USD in 1 day
0.0 (0 reviews)
0.0
0.0

About the client

Flag of ROMANIA
Bucharest, Romania
5.0
54
Payment method verified
Member since May 21, 2014

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.