Find Jobs
Hire Freelancers

circuit board design

$250-750 USD

Closed
Posted over 7 years ago

$250-750 USD

Paid on delivery
I have a circuit that I need a PCB design for - about 50 components including 3x 8 pin IC and 2 transistors, Hole-thru Single or double-sided design. Need full set of Gerber files
Project ID: 11927200

About the project

70 proposals
Remote project
Active 7 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
70 freelancers are bidding on average $351 USD for this job
User Avatar
Dear Sir, If you are looking for an highly skilled hardware engineer, I believe that I am the one who you're looking for. I am an experienced PCB designer who has over 15 years design experience on complex PCB design (Arm Based/FPGA/Analog/Digital/RF/BT/WIFI/IOT....). I can provide you with design service from schematic entry(circuit design) to PCB layout. I can help you prototype the PCB. EDA Tools--ALTIUM DESIGNER16/ PADs/ORCAD/EAGLE Please message me if you are interested in my service. We can talk more. Thanks!
$566 USD in 5 days
4.9 (107 reviews)
8.3
8.3
User Avatar
hi sir I am an expert PCB designer with more than 8 years of experience. I can do it for you. please get in touch to get started. I am waiting for your reply to start regards
$254 USD in 3 days
4.9 (210 reviews)
7.9
7.9
User Avatar
Hello. I'm an electrical engineer/PCB designer. You may check my qualification in the profile . Your project is interesting for me. We may discuss any questions
$250 USD in 5 days
4.9 (196 reviews)
7.5
7.5
User Avatar
A proposal has not yet been provided
$250 USD in 3 days
4.9 (184 reviews)
7.1
7.1
User Avatar
Hello! How are you?! I have 6 years experience with schematic and pcb design! I can help you right away! Please look at my profile and then send me a message to talk more about your project! Have a great day!
$250 USD in 4 days
5.0 (54 reviews)
7.0
7.0
User Avatar
Hello! Have a great weekend! I can do design in Altium in few days, and provide you all GERBER and Altium files. Please give me your requirements for PCB size. Will you use machine or handle soldering? Best regards, Oleksandr.
$250 USD in 3 days
4.9 (30 reviews)
7.1
7.1
User Avatar
I am an Electrical Engineer having specialization in Electronics and Control, teaching in Electrical Department at FAST National University Pakistan. I am also persuing my MS degree in Electrical Engineering with specialization in CONTROL. I have taught the followings courses, and also done many projects related to these subjects as well as related to consumer electronics products. 1. Control System Design & Modelling (Continuous, Discrete, Linear, Non-Linear, Optimal, Fuzzy Logic + Matlab & Simulink) 2. Digital System/Logic Design (Verilog, VHDL, Logisim) 3. Micro-controllers (8051, Arduino, PIC) 4. Power Electronics (PSIM, MATLAB, PSpice) 5. Control of Electric Machine Drives 6. Circuit Analysis and Designe etc 7. PCB Design (Proteous + Ultiboard + Altium Designer) I assure you, if you assign your project to me, you surely gonna work with me in future. Note: I also provide the solution to Mechanical Engineering Projects.
$250 USD in 3 days
4.8 (151 reviews)
6.6
6.6
User Avatar
Hi sir, We have delivered projects to our clients with quite complex circuit designs and tight pcb dimensions. we offer you our services, we will design you a very nice and clean pcb with no EMI and thermal interferences. We are expert in layouts of all kind of PCB. we will give you gerber files. PCB design will be optimized and there will be not extra routing and vias in it. It will perform very well. We offer you our services at very low and comparatively affordable rates. Please discuss with us. Let me introduce my team to you. We are team of expert engineers who are sound experienced in embedded systems (arduino + other microcontrollers), programming, circuit designs, electronics, product designs, pcb layouts, database management, MySQL etc. We offer you our services at very low rates. Please discuss your project in detail. We will deliver design and code, if you want us to send you prototype, you have to pay additional charges of prototyping and courier such as dhl etc. We are very friendly in nature and will help our clients during and after projects completion. We are flexible in communications and rates. Very much looking forward to hear from you on this in coming days. Regards, Ahmed Lead Technical Engineer Turktroniks
$250 USD in 10 days
4.9 (53 reviews)
6.8
6.8
User Avatar
I can do for you this design. In accordance with your circuit. I needed sizes for this PCB, also position of the connectors.
$250 USD in 7 days
5.0 (39 reviews)
6.4
6.4
User Avatar
Hello, I have been associated with Hardware design (Circuit / Electronics design), PCB design, Library creation and Library database maintenance, PCB Manufacturing, Component procurement, PCB Assembling and Functional testing for over 9 years. I have used various CAD/EDA tools for PCB design. Would you prefer any specific EDA tool for PCB design (or) any tool is okay? I will provide the PCB Manufacturing, Component procurement, PCB Assembling & Functional testing services too. I would like to take this up and are fully equipped to deliver the required files. So, if you'll give me a chance to take part to your work, I will respond in the same manner, handling you good quality projects, as soon as possible. I look forward to hearing from you! Wish you a nice day! Thanks & Regards, Karthik
$250 USD in 3 days
4.8 (120 reviews)
6.7
6.7
User Avatar
Hi, I hope you are doing well. I have expertise in designing and manufacturing PCB. I have understood your project requirements and I can execute it in less possible time. Looking Forward, Khawaja
$526 USD in 2 days
4.8 (85 reviews)
6.8
6.8
User Avatar
I have 4+ years working experience in schematic and pcb layout design. Fluent in Mentor Expedition, Cadence Allegro, Mentor PADS, Altium Designer pcb layout tools. Experience in creating footprints library, pcb layout, constraint editing, gerber generation. Basic understanding on DFM, DFT and appication on Valor DFM tool. Experience in routing high speed signals such as usb3.0, sata, pcie, lvds etc. Experience in routing double-sided, 4-layers, 6layers,8layers and more layers pcb stackup. strong high speed layout skills including differential pair, impedance control, matched delay, etc Experience with isolation requirements, Experience designing high density boards that incorporate microprocessors, DDR2 and DDR3 memory and peripherals, including layout experience with BGA parts Experience in board layout involving communication protocols such as Ethernet, USB, I2C, etc Experience with Switch Mode Power Supply layout techniques Experience with high-speed digital hardware design
$250 USD in 2 days
5.0 (20 reviews)
6.1
6.1
User Avatar
I have over 35 years experience as an electronic design engineer, please see my profile for more details I believe I could easily create the PCB Gerbers for this board in thro hole or ST which ever you prefer. I would also include a BOM fully costed with all the distributers part numbers. Best Regards Dave Lelievre
$250 USD in 4 days
5.0 (22 reviews)
6.0
6.0
User Avatar
Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in SMPS, Battery chargers, battery management systems, Power Supplies, Embedded controller design for different applications, Inverters design from few watts to KW range using Buck, Boost, Buck -boost, Push Pull and H-bridge inverters. I am excellent in PCB designing using Altium , ORCAD 16.6, CAD INC, CADSTAR .I can do up to 12 layers meeting the voltage creepage and clearances and thermal requirements as per current ratings to meet UL and compliance standards. I understand your requirement and ready to work for you. Please contact me for further discussion
$555 USD in 10 days
4.9 (31 reviews)
6.3
6.3
User Avatar
Hello, Have a great day. My name is Shahbaz Ali. I am heading a lab for designing the circuit and making prototypes. We will deliver you complete PCB design. Please feel free to contact us. Best Regards, Shahbaz.
$250 USD in 3 days
4.5 (44 reviews)
6.9
6.9
User Avatar
hi i am an electrical engineer. i have vast experience related to circuit design and pcb design. i have done many embedded system projects. i have hardware experience pcb design. let me know if you are interested. we can discuss further on chat.
$250 USD in 10 days
4.9 (23 reviews)
6.1
6.1
User Avatar
Hello I can help you with your PCB project, i can design the PCB board with eagle software and also i can generate Gerber files to manufacture the same PCB board. I need more information about your project, deadline and other things. I can design your PCB board on a short period of time! many thanks. Deliverable items hardware: - Schematic on eagle 7.4. - PCB layout on eagle 7.4. - PCB 3D view bot without components. - PCB 3D view top without components. - PCB view 3D without components on SketchUp 2016 - Gerber Files. - Add your company logo on top layer. Also we can try to make some units prototype on near future. If you have any questions feel free to ask. Contact me before your order. Thank you and Have a good day, John
$250 USD in 5 days
5.0 (102 reviews)
6.0
6.0
User Avatar
Hi I am interested to your project. I am familiar with electronics, PIC microcontroller as well as PCB design by Eagle. Thanks.
$250 USD in 5 days
4.9 (84 reviews)
5.8
5.8
User Avatar
Dear sir, Please trust and give us this design. We will try to completed within 2 daus and send out package gerber files.
$277 USD in 2 days
4.9 (17 reviews)
5.5
5.5
User Avatar
Dear Valued Employer, My name is Martin Botsov and I am an engineering physicist with extensive experience in the field of circuit design, circuit prototyping and PCB design. I would allow myself to emphasise on my vast experience in the field of audio circuit design. As I understand from the project description you are looking for an electronics engineer capable of designing a custom printed circuit board according to all stated requirements. So, without further ado here's how the workflow would look like, if you happen to choose me as a partner for your project: 1. Initial discussion 2. Review of existing design 3. Transfer of schematic drafts 4. Component library creation 4.1 Schematic symbol library creation 4.2 Footprint library creation 5. Schematic drawings 6. Review of final schematic drawing 7. Layout design 7.1 Components placement and arrangement 7.2 Review of proposed layout design arrangement 7.3 Components routing 7.4 Review of final layout design 8. Design rule check, verification and validation 9. Production files (GERBER, NC DRILL, BOM, ASM, PICK & PLACE, SCH, STEP, 2D mechanical) Your project will be carried out on Altium Designer and Autodesk Inventor. Don't hesitate to contact me with questions regarding any details around your project. You could also check out my profile on Freelancer and LinkedIn for more details around my professional experience. I am looking forward to hearing from you soon. Thank you for your time. Kind Regards Martin Botsov
$748 USD in 25 days
5.0 (16 reviews)
5.6
5.6

About the client

Flag of UNITED STATES
Somerset, United States
0.0
0
Payment method verified
Member since Oct 28, 2014

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.