Application of CFD Simulation in the Development of a New Generation Heating Oven

Hi Greetings! I am a Mechanical with expertise in CFD. I can use both SolidWorks and ANSYS Fluent for CFD. I have done projects that include CFD of vertical axis wind turbine to optimize TSR, CFD of jet engine compressor for recovery of wake region, Design of wing to optimize lift, etc. Given my experience of CFD projects, I believe I am the right person for this project. For this project, I will use SolidWorks for 3d Modelling and for CFD I will use ANSYS Fluent. Along with CAD and analysis files, I will provide a rich technical report explaining the results and steps involved. Kindly contact me to discuss further. Regards,

Hi, My name is Ishwar. I am a Mechanical Engineer with over 2+ years of experience using hyperworks and ANSYS. I can do FEA and CAD designing. I am having clear understanding of your project deails and also be sure I can complete your project perfectly in time! Please open a chat so that we can discuss it more. I will do my best to complete your project perfectly with high responsibility and passion! You will get wonderful results. Thanks in advance. Ishwar.

Greetings! I am an Aerospace Engineer with MS in Aerospace CFD (Computational Fluid Dynamics). I have an experience of 3 years working with Government and private organizations. I have studied Turbomachinery, Aero Vehicle Design and Computational Fluid Dynamics as my core in MS program and have successfully completed several projects related to CFD and turbomachinery. Few examples are "Design and analysis of centrifugal Compressor and high pressure turbine for a turbofan engine", "Analysis of first stage of turbine exposed to UHTs", "Design and analysis of fan Compressor" and several other projects. All these projects are done in ANSYS with ICEM CFD as the meshing tool while Fluent as the solver. I have also formulated generic MATLAB and FORTRAN codes for AVD of different aircrafts and conduction, convection, diffusion, advection and convection-diffusion problems which involve solving heat transfer problems by incorporating efficient numerical techniques. I have also been working on ANSYS Fluent and CFX for past three years and have good experience working with the simulations of turbomachinery. All the projects are in my portfolio. I can share with you the list of projects I have completed and you can have a look at my portfolio as well for further details. Feel free to contact me any time. Looking forward to working with you. Thank you!

Hello I'm Mohamed Saeed CFD expert with high experience I have checked your job description and ready to help you in your project

Hey.... I am glad to see the heat dissipation / distribution problem in an oven using ANSYS fluent because it is the area of our expertise for which you may look at the portfolio. I have carried out a lot of projects on Fluent. My offer would be covering following 1. Relevant Literature review 2. 3D model preparation model setup in ansys 3. Meshing and boundary conditins 4. Analysis 5. Results discussion conclusion 6. References 7. Recommendation for improvement in design I will make a report of approx 2500 with APA style references Please have a loook on my portfolio and inbox details so that i can start with your project Customer satisfaction and timely delivery is my foremost priority along with long term professional relation.... Regards

Hello I am a mechanical and aeronautical engineer with 5 years experience based on CFD in aerospace industry. Currently I am working as a thermal engineer and have solid background on thermal design and thermal analysis. I can perform both flow and conjugate heat transfer analysis. Besides I have experience on temperature measurements. Pls send me message via chat for more information. King regards.

Hi, I have PhD in mechanical engineering from Tohoku University of Japan. I have published 20 Journal papers and 16 international conference papers. I am also expert in mechanical engineering softwares including Ansys, Fluent, Comsol, CATIA, Solidworks, Abaqus and Inventor. I'm interested in your project. Please send me a message so that we can discuss more. Regards.

I am a mechanical engineer having specialities in design and analysis. I have vast experience on Ansys fluent. I have done many project related to CFD and i as a engineer have expertise in thermal system. I would be glad to show my previous works. Kindly leave a msg so that i can share you my previous work on thermal analysis on meeting room.

Good day, I am a mechancal design Engineer with work experince in computer aided design and computer aided engineering. I will do your product cfd simulationproject by performing: -3D modelling of the solid product using SOLIDWORKS 2019 -computational fluid dynamic CFD simulation using ANSYS fluent. It'll be a nice time working for you. Best Regards,

Hello Dear I have read your project description CFD Simulation. I consider myself a well-qualified professional for doing this job. I am EXPERT in the work like Modeling ,animation ,after effect animation,CAD, 3D rendering ,3D model, 2D cartoon type animation, line art animation ,Motion Animation. I have great experienced as a 2D & 3D artist i can do work as per client requiremnt and get 101 % satisfaction work I have been in the business for 4 years and of course i know what my clients needs are. Thanks & Regards Anish Jaggi

Hi I am an Aerospace Engineer with expertise in CFD Simulations using Ansys Fluent CFX including UDS and UDF. Inbox me and let me know your requirements and get your work done. Regards, Adeel

Hello, I have 4+ years of experience in CFD analysis using ansys fluent. I have completed 34 successful projects out of which 5 are of thermal analysis let me know if you you want to review my work i can share with you. Presently i do not have idea about the physics of your simulation but i am pretty sure that it will be clear after our initial discussion. As this is the patent work i am ok to work with any type of non disclosed agreement if you have. Please do share the details of the project. I request you not to consider this bid as final cost price may change after we freeze the technical part. Thanks, Mandar.

Hi, I am interested in this project. I have 6 years of experience as a CFD Engineer. I had done over 200 ventilation, HVAC CFD, fire safety CFD, thermal CFD projects, and all types of CFD projects. All projects are done in industrial standards. Please feel free to contact me

Hi I am a Ph D of CFD and heat transfer and have got a decade of experience in developing solvers and simulations for a number of applications on various frameworks and software. In addition that I am an expert of convection and radiation which are essential for your oven project and have published widely in a spectrum of international journals. i will get your work done with utmost efficiency. You may consider me with confidence Regards Muthu

Hello, I am mechanical engineer. I am expert in LAGRANGIAN MECHANICS and SINGLE AND MULTI DEGREE OF FREEDOM VIBRATIONS.  I have knowledge in DIGITAL SIGNAL PROCESSING and IMAGE PROCESSING. I have very deeply knowledge almost in any part of mathematics. I can solve partial and  differential equations, calculus(indefinite and definite integrals, derivative) matrix calculus, statistical analysis, fouirer, wavelet and laplace analysis and transformation. I am mechanical engineer. I can solve  FINITE ELEMENT METHOD of STRESS, VIBRATIONAL and COMPUTIONAL FLUID DYNAMICS problems in ANSYS, ABAQUS, SOLIDWORKS, FLUENT, ICEM, CFX, MATLAB, SIMULINK AND MATHEMATICA.  I can describe and interpret solutions of almost any analysis. I can predict and  khow how solution will be. I can solve hard engineering problems, linear and nonlinear control system. I can solve any MECHANICAL VIBRATION PROBLEM single deegre of freedom and multi deegreem of freedom, STRUCTURAL(STATICS, MECHANICS OF MATERIALS) PROBLEM, MODAL ANALYSIS, FLUID MECHANICS, FLUID DYNAMICS, TERMODYNAMICS. I have advanced knowledge in 3D CAD MODELLING. I can model with SURFACES, PARTS and DRAFT. I know how to model in SOLIDWORKS, CREO and NX.I have basic knowledge in Solidcam and hyperMill. I know to program in c and python.  I can start today. I speak fluently English.

I am a Research Scholar in the area of CAD and Computational Fluid Dynamics and Machine Learning. I published 2 international conference papers and eager to work on the projects which provide value in the field. I also have experience in Website development, front and back end development. I use SolidWorks, COMSOL Multiphysics, ANSYS-Fluent, Matlab, and python to obtain discernable results. I worked on complex CFD analysis involve nonlinearities, for instance, shock waves. I have a profound understanding of FEA, multiphase flows, and subsonic to hypersonic flow simulations over the aircraft. Projects: (1) Numerical analysis of The Bending Effects of Cylinder on Shock-Wave / Turbulent Boundary-Layer Interactions in Hypersonic Flow. (2) Analysis of the variation in the temperature profile during the Water-injection into the Reactor with methane Air fueled flame. (3) The Simulation of flow characteristics through helical shape Teflon tube with convective heat transfer using COMSOL Multiphysics. (4) Numerical Analysis of the Pressure, Temperature and Aerodynamic Forces on Hypersonic Blunt Hemispherical Shaped Body (5) ANSYS CFD & FEA analysis of wind turbine blade deformation caused by aerodynamic loading. (6) Analysis of the effect of aerodynamic pressure on the Saturn V Rocket nozzle’s Bolted flange joint. (7) Study of Turbulent flow over NACA0012 AIRFOIL.

Graduated in Mechanical Engineering with Post Graduated in Thermal Engineering , having Professional experience of 5+ Years in ALD ( Analysis Lead Design) working with Design and Analysis of Heat Exchangers , Centrifugal pumps, Hydraulic Systems, Emission Control Devices, Oil and Gas Filteration Devices. Worked with esteemed organisation and Startups . Filed 2 Patents related to Heat Exchanger and Integrated Safety System for Exhaust Systems Hands on Experience with Ansys Workbench, Fluent, CFX, ICEM CFD, ANSYS MECHANICAL, ANSYS Harmonic acoustics FILED TWO PATENTS RELATED HEAT EXCHANGER EFFECTIVENESS

I have done these types of works in past years. I have gained an experience in the past which will come in handy during this project as well. Please have a look at my profile to see past experience and all of the education and professional qualifications. I am available to help any time you needed. Looking forward to begin a part of your team Thank You.

Mechanical thermal engineer With rich experience in cfd, i cepak and flothem 11 years of experience in aerospace, automotive and telecommunications. Cfd expert mechanical engineer Thermal engineer Work experience in combustion Heat transfer and validate the results

Hello, I can offer my expertise as a simulation engineer with 5 years of industrial experience in CFD in a renowned american aerospace company. I also have my own computing power and software licences (up to 128 threads).