Find Jobs
Hire Freelancers

design Arduino shield

$30-250 USD

Completed
Posted almost 9 years ago

$30-250 USD

Paid on delivery
Hello , i want some to have my own Arduino shield according to my requirement i need somebody to design the shield and point out company that create prototype for arduino shields via providing the Design of the shield my requirement is very simple: 1-i need it compatible with arduino uno where i can plug it upon arduino 2-i need it with RTC (real time clock) 3-i need it with SSR or Relay that can control 220V / 30Amp with 4 screws for input/output and I WILL BE ABLE TO CONTROL IT using arduino 5v ( check this image for similar Relay : [login to view URL])
Project ID: 7509863

About the project

33 proposals
Remote project
Active 9 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
Awarded to:
User Avatar
A proposal has not yet been provided
$200 USD in 5 days
4.8 (108 reviews)
6.0
6.0
User Avatar
Hello! I can develop the shield for you. It should be easy solution. I will provide circuit diagram, PCB design and BOM. I can build the prototype for additional $60 + shipping costs. Regards, Bogdan. UPD Hello, I have updated my proposition. My bid include working prototype developing and testing. You should pay in additional shipping costs only. It should be up to $10-15 for regular post service. Regards, Bogdan.
$150 USD in 21 days
5.0 (6 reviews)
4.2
4.2
33 freelancers are bidding on average $199 USD for this job
User Avatar
Hello, Have a Great Day. We are team of Engineers running a setup. We will deliver the following. 1. Schematics and BOM in Proteus. 2. Simulation and Arduino Sketch. 3. PCB Design and Gerber files. 4. Demo to show the working of our Design. Please note we will build the shield in our Lab to test our design. Looking forward for the response. Best Regards, Shahbaz.
$250 USD in 15 days
4.6 (69 reviews)
7.1
7.1
User Avatar
A proposal has not yet been provided
$155 USD in 3 days
4.9 (99 reviews)
6.5
6.5
User Avatar
pcb designer expert...
$278 USD in 5 days
4.9 (21 reviews)
6.2
6.2
User Avatar
Đề xuất vẫn chưa được gửi
$277 USD in 3 days
4.7 (37 reviews)
6.5
6.5
User Avatar
Hello Sir, I am a full time working freelancer and I am available on freelancer most of times and I can provide you the required prototype as you want it. I have very good feedbacks from my previous employers and I have been doing prototyping for many years. I have completed many projects and shipped out the prototypes. I have contacts in Chinese manufacturing firms so I can assist you with mass production of the units. Please contact me if you are interested. I have attractive milestone planes that assure the satisfaction of both parties. Thank you Anthony
$222 USD in 10 days
4.8 (64 reviews)
6.5
6.5
User Avatar
Hello. Im designing different electronics devices, mostly based on avr, arm MCUs and boards with them like arduino, stm-discovery etc. I can help you with your deal and since im new one here I can do it cheaper then anybody. (autopromotion^)) Do you need any software library for it? I can do a design, prototype, program - everything. Lets talk.
$138 USD in 10 days
4.9 (62 reviews)
6.0
6.0
User Avatar
A proposal has not yet been provided
$250 USD in 10 days
4.9 (18 reviews)
6.0
6.0
User Avatar
Hello, I am perfect for this job and already done similar jobs. I can do the prototype myself and can send you on extra cost. If you are going to produce in volume then I have link of Chinese factory as well. Bulk order price for this shield will be less then 10USD but depends on quantity. Please feel free to write back if you consider. Thank you, Sam
$111 USD in 3 days
4.9 (41 reviews)
5.6
5.6
User Avatar
hello i can make you fitrst a simulation for your requirement in Proteus. if it is ok i can design you a pdb for your shield. thanks
$90 USD in 3 days
4.7 (54 reviews)
6.0
6.0
User Avatar
HI I'm Chamika , and let me Introduce me and my works with Employers , I'm Electronic Engineer from University Of Moratuwa , Currently I'm Developing UAVs for Production with collaborate with two companies. I have done several Industrial Projects (ROBOTs , UAVs, Bio medical, Consumer Electronics) you can see some of them in my Portfolio as well . Have done several Prototypes to the production .Once we success with Prototyping we have to make sure it can manufacture . So the developer should have the knowledge with Manufacturing as well . If there is any other things to know you can contact me as well Thank you for time spent on me Chamika Gamage Electronic Engineer
$200 USD in 3 days
5.0 (15 reviews)
5.2
5.2
User Avatar
Hi, I have many years experience in electroncs design and microporcessors, moast recently with the Arduino range of products. I dont see any problems with delivering what you require but there may be some serious safety issues with mixing the low voltage Arduino components with the 220VAC relay on the same shield. If you wish I can include a built and tested prototype with Ardunio code. Regards and good luck with your project James Harrison-Smith Infonics
$244 USD in 10 days
4.6 (14 reviews)
5.4
5.4
User Avatar
I have designed many Arduino shield, including 1) POE shield 2)Ethernet Wi-Fi bridge 4) Temperature profile controller. 5) BLDC motor shield.
$266 USD in 4 days
5.0 (12 reviews)
4.5
4.5
User Avatar
I'm an Electronic Engineer, working with electronics circuits (digital, analog, mixed and of power) and embedded products with microcontrollers since 1996. I undestood all you need and I'm ready to start. I am ready to answer any question you may have. I hope you choose me. Regards, Leonardo Takahata
$155 USD in 3 days
4.3 (15 reviews)
5.4
5.4
User Avatar
Hi, We are a team of engineers with more than 10 years of experience in designing and developing various digital and embedded systems... Currently, apart from our R&D, we help engineering students to complete their academic projects. Also conduct seminars and workshops on Arduino and Robotics... So we have experienced with a lot of Microcontrollers such as PIC, AVR, ARM, Arduino etc. We are also experienced with a lot of sensors and sensor modules.... We are very proficient with PCB desingning tools such as EAGLE, KICAD etc... We have done a lot of projects with Arduino, please check my completed projects and reviews given by other employers...:-) We will build a prototype PCB here and test and confirm that everything is working well...:-) We really would like to know more about your project, kindly let me know if you are interested...:-) Thank You
$200 USD in 5 days
4.9 (12 reviews)
4.8
4.8
User Avatar
Hi, I read you project description. You need to create your own Arduino shield. I can help you with this project. I am an electronic engineer. You can see my projects in my profile. I will send you the working sample PCB and all the design files to your country. You can contact me for further clarification. -Akilan
$500 USD in 15 days
4.9 (16 reviews)
4.3
4.3
User Avatar
hello i can do your requerments, this relay need 12 volt to run, so we gonna add to pin for external 12 volt the RTC circuit will be source by the arduino , we can build this modul here hope to read your feedback
$333 USD in 3 days
4.7 (9 reviews)
4.3
4.3
User Avatar
Hi, I have more than 10 years experience in embedded systems. I have done several projects on arduino uno. Regards Ratheesh
$200 USD in 3 days
4.9 (7 reviews)
4.1
4.1
User Avatar
hire me brother. I will do a good job
$333 USD in 5 days
4.6 (11 reviews)
3.8
3.8
User Avatar
I can do this in 1 day as it is just a relay change (and changes for trace widths for current handling and possible circuit protection) from my board I developed for another project. I have experience in high current applications ( many do not) where considerations for isolation and temperature rise must be made. Hire me today, I'll have the layout done tonight and boards of on their way. I'll include price for parts, assembly, test and will deliver 2 blanks (assembled and tested for small additional charge plus parts) with full Gerber's, schematic, board and tool files. (i ve been using the TinyRTC module mounted on the board as the parts are more than the assembled board!)
$139 USD in 1 day
5.0 (3 reviews)
3.5
3.5
User Avatar
A proposal has not yet been provided
$88 USD in 3 days
4.6 (8 reviews)
3.7
3.7

About the client

Flag of SAUDI ARABIA
Riyadh, Saudi Arabia
5.0
18
Payment method verified
Member since May 11, 2014

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.