Structural Engineering Jobs

I need detailed electrical, mechanical, and structural plans for a meat shop. This includes all necessary systems: HVAC, plumbing, and refrigeration. Ideal Skills and Experience: - Expertise in designing electrical systems for commercial buildings. - Proficiency in creating mechanical plans, particularly for HVAC, plumbing, and refrigeration. - Strong background in structural engineering. - Experience with food industry regulations and requirements. - Ability to provide a detailed project proposal, showcasing past work and relevant experience. Please include: - Past work - Experience - Detailed project proposals

Prepare a complete 3D steel fabrication model and workshop drawing package on the supplied structural engineer drawings and connection details. This is not a structural design project. The work is limited to fabrication-ready detailing and interpretation of the supplied drawings. Files Provided Ground floor steelwork layout First floor / roof steelwork layout Steelwork sections First floor connection details Roof connection details Architectural elevations and sections for coordination Use the latest construction revisions (C2/C3) included in the uploaded drawing package. will propvide more info via chat.

I need a full structural package for a small commercial development that includes • one G + 1 building in steel framing, and • two steel-frame warehouses using portal or truss systems. All calculations and drawings must comply with the Local Municipal Code. Standard gravity loads will be supplied; you will confirm wind, seismic and soil parameters once the site report is shared. Scope of work – Run a complete analysis and primary steel member design. – Build the Tekla Structures model and generate GA, assembly and single-part fabrication drawings. – Prepare a coordinated Bill of Quantities with weight breakdowns per member category. – Provide editable files of the analysis model (STAAD, ETABS or equivalent) and the Tekla model. Acceptance ...

I need a thorough structural calculation and performance check on a newly designed aluminum profile system, with special focus on the largest 3 m × 3 m configuration before cascading the findings to the smaller variants. The study must cover both static and dynamic load analysis so that I can confirm each profile, connection detail, reinforcement option, and fixing method is truly fit for purpose. Material fatigue is my prime concern, so the calculation package has to explore long-term cyclic effects alongside the usual strength and stiffness checks. If you spot joint failure or deformation risks during the process, flag them, but the fatigue life is the critical pass/fail criterion. Please ground every assumption in recognised codes and clearly document the input data, equations, ...

I need comprehensive design criteria for 13-exterior electrical racks and 13-30' to 50' tall antenna bases with concrete working pads at the base of the Electrical Racks. Requirements: - Install in industrial zone of Wichita Falls, Texas - Antenna bases primarily for communication purposes - Must adhere to regional standards and regulations Ideal Skills and Experience: - Experience in designing for industrial environments - Knowledge of communication antenna requirements - Familiarity with Texas regional construction standards

I need comprehensive design criteria for 13-exterior electrical racks and 13-30' to 50' tall antenna bases with concrete working pads at the base of the Electrical Racks. Requirements: - Install in industrial zone of Wichita Falls, Texas - Antenna bases primarily for communication purposes - Must adhere to regional standards and regulations Ideal Skills and Experience: - Experience in designing for industrial environments - Knowledge of communication antenna requirements - Familiarity with Texas regional construction standards

We are converting our loft into a habitable room and the new dormer is almost ready now. However we've reconsidered the original place of the new loft staircase and now we need the front chimney breast disconnected at the loft level (to be removed) and the remaining chimney stack above - supported; as well as calculations and drawing of a new loft staircase opening which will be in the place of the removed chimney. Attached, you can find more details - hope these explain things better. Please let me know if you could help. Look forward to hearing back,

I need a Florida-licensed structural engineer who can work on an upcoming structural project. The scope calls for full structural analysis and design, a thorough building-code compliance review to satisfy state and local jurisdictions, and ultimately an inspection report with the engineer’s signed certification. If you are currently licensed in Florida and have recent experience producing permit-ready structural packages under the Florida Building Code, I’d like to hear how quickly you can begin and what information you would need first.

I already have the full script for each lesson; what I need now is a practising structural engineer who can turn that text into clear, engaging screen-recorded videos. You will read the script in your own words (no on-camera appearance required), capture your screen as you work through the material, and deliver polished MP4 files that a beginner-to-intermediate audience can follow without pausing every few seconds to rewind. Feel free to present with slides, solve problems on a virtual whiteboard, or demonstrate recognised industry software—the delivery style is up to you as long as the explanations stay concise, practical, and technically correct. I’m happy to see AutoCAD, Revit, , or any other mainstream tool in action if it helps illustrate the concepts. Audio quality must...

I'm looking for a skilled structural engineer to assist with a residential renovation project. The specific task involves the removal of a header from a pantry. Key requirements include: - Expertise in residential structural modifications - Ability to assess and ensure structural integrity post-modification - Provide detailed plans and calculations Ideal Skills & Experience: - Licensed structural engineer - Experience with residential projects - Strong knowledge of building codes and regulations Please include relevant experience and credentials in your bids.

I need a licensed Structural Professional Engineer (PE) to approve a design for a Polypropene Plastic tank with a capacity of over 1000 gallons, which will be used for water storage. The tank will be installed above ground, indoors. Key requirements: - Provide structural integrity analysis - Ensure compliance with local building codes - Submit sealed approval drawings Ideal skills and experience: - Licensed Structural PE - Experience with large capacity tanks - Knowledge of Polypropene material properties - Familiarity with indoor installation requirements Looking for a detailed, code-compliant approval. The Prints attached titled "Spray Water Tank" is from our customer and is currently approved as a Steel Tank and the customer is wishing to make this tank using 1" thick...

We are converting our loft into a habitable room and the new dormer is almost ready now. However we've reconsidered the original place of the new loft staircase and now we need the front chimney breast disconnected at the loft level (to be removed) and the remaining chimney stack above - supported; as well as calculations and drawing of a new loft staircase opening which will be in the place of the removed chimney. Attached, you can find more details - hope these explain things better. Please let me know if you could help. Look forward to hearing back,

Title: Victorian Building Designer and Permit Coordinator – Ongoing Work We are seeking an experienced building designer and permit coordinator to manage the complete post-sale documentation and building approval process for a range of standard expandable cottages in Victoria, Australia. This is not simply a drafting job. We need a reliable person who can take each customer project from initial site information through to completed plans, consultant coordination and building permit approval. Our business has established 20ft, 30ft and 40ft expandable cottage models. The core designs are standardised, but each project requires site-specific documentation, coordination and approval. The successful applicant will initially complete one paid pilot project. If successful, this will b...

I need a portable ramp designed for elderly access in public places and home uses . The ramp should be lightweight yet durable, made of carbon material or stainless steel for its lightweightness. Key Requirements: - Portable, self collapsable and easy to set up - Suitable for public places and home uses. - Made of carbon material or stainless steel - Lightweight yet durable - Non-slip surface for safety Ideal Skills and Experience: - Experience in designing mobility aids - Knowledge of materials, particularly carbon and stainless steel - Ability to create lightweight yet sturdy structures - Understanding of safety regulations for public access equipment Please provide examples of similar work done.

I’m setting up a steady, month-to-month engagement with a seasoned Tekla Structures professional who can own the full detailing workflow on a series of industrial projects. Every month I’ll pass you new steel packages that need to move seamlessly from concept to fabrication, so I’m counting on your deep command of Tekla to keep the pipeline flowing. Scope of work – Build clean, well-organized Tekla models straight from my IFCs, sketches, or PDF mark-ups. – Produce all GA drawings, assembly drawings, single-part sheets, and NC/DSTV files ready for the shop. – Generate bolt and material lists plus any custom reports I request so purchasing can cut POs without delays. What I’m specifically after You’re a senior-level detailer who has a...

My team is preparing for a new development phase and I need a licensed civil engineer to guide the entire technical process—from preliminary analysis through to final documentation. The scope is intentionally broad at this stage because I want your professional input on the most efficient path forward, whether that ends up centering on site grading, structural layout, roadway connectivity, or geotechnical recommendations. Here is what I expect once we define the exact brief together: • A concise work plan that flags key code requirements and milestones. • All calculations, CAD drawings, and supporting notes produced in software you specify (AutoCAD, Civil 3D, Revit, STAAD Pro, or equivalent). • A clear set of stamped documents ready for permitting, packaged with a...

I’m converting an attached garage in Anaheim into a Junior ADU studio that will share the main house bathroom; the only new feature is a kitchenette that is already fully designed. What I now need is a complete, permit-ready drawing package and someone who can walk it through the city until the permit is in hand. Your core tasks • Draft full architectural and any required structural/MEP sheets from my existing PDF design set, ready for City of Anaheim submittal. • Verify the layout against California JADU code requirements and Anaheim’s local ordinances, adding Title 24 energy documents and any other calculations the city requests. • Handle the permit process: compile forms, submit, track corrections, and provide revised drawings until final approval. Key...

Please don't bid if you are not certified for PA, USA. I need a licensed professional to stamp my detailed pole barn drawings for Pennsylvania approval. The barn is residential and under 1,000 sq ft. Requirements: - Must be licensed in Pennsylvania, such that City of Easton can approve it. - Experience with residential pole barn structures - Provide a stamped drawing for code compliance Ideal Skills: - Structural engineering - Knowledge of PA building codes - Attention to detail and accuracy

I’m adding a modest storage attachment to the rear of my commercial shop and need a licensed U.S. structural engineer to make sure everything is code-compliant before I submit for permits. The footprint is small, but the city still wants signed and sealed calculations plus drawings that show the new walls, roof ties and how the loads transfer to the existing structure. Here’s what I’m looking for you to deliver: • Stamped structural drawings (PDF and DWG) showing the connection details between the existing building and the new storage area. • Load calculations that satisfy IBC and local amendments. • A brief design summary I can share with the contractor and the building department. I’ll provide site photos, the original as-built plans and mea...

I need a licensed structural engineer to stamp blueprints for a new single-story residential home. The stamped blueprints will be submitted to the county building department for approval. The blueprints must include: - Structural details Ideal skills and experience: - Licensed structural engineer - Experience with residential home projects - Familiarity with county building department requirements

I want a licensed structural engineering service for a new Florida one floor house 2,331 heated sf 610 unheated sf wood roof truss and interior walls . Concrete block exterior walls The work involves designing the elements required by the current Florida Building Code. Deliverables I’m expecting: • Signed and sealed structural drawings ready for permit submission • Calculation package showing load paths, wind and uplift checks, and material specs • Brief response sheet to address any comments that may come back from the reviewer

I need a comprehensive inspection of a 1950s building with a partially collapsed roof. The goal is to determine if the exterior structure can be salvaged and if a new roof can be installed. Also, information if a 2nd floor can be added. Requirements: - Both visual and structural analysis of the entire exterior structure (walls, foundation, etc.) - Basic report with repair recommendations Ideal skills and experience: - Structural engineering expertise - Experience with older buildings - Ability to provide clear, actionable reports

I’m starting with a blank slate on a 60 m × 50 m × 15 m steel portal-frame cattle shed and need the full structural and fabrication drawing package produced from scratch, following standard design specifications. You’ll take the concept all the way from initial sizing through to shop-ready documents. That means creating the structural model, optimising member sizes, detailing the connections and then translating everything into clear fabrication drawings and material schedules. I expect PDF sets for review plus editable DWG (or equivalent) files, and a concise calculation report that backs up the design assumptions. Experience with tools such as Tekla Structures, AutoCAD, Revit, or SAP2000 will be useful—use whatever combination you prefer, as long as the...

We are seeking an experienced structural engineer with strong **FRAMECAD and Light Gauge Steel Framing (LGSF/LSF)** experience to develop the structural framing package for a small commercial development based on the architectural drawings that will be provided. The project consists of several interconnected low-rise structures, including: 1. Reception and Office Building 2. Workshop / Covered Work Area 3. Staff Facilities Building 4. Small Utility / Security Structure The structural system is to be developed using **cold-formed steel framing and the FRAMECAD system**, with the design coordinated with the architectural layouts. Scope of Work The selected engineer will be responsible for developing the complete LSF structural package, including: * Structural analysis, design and engin...

A new building project is moving into the steel phase and I need complete shop-ready documentation. I will share the engineer’s general arrangement drawings in DWG/PDF; from those you will create fabrication plans for every beam, column, and connection in line with our local structural-steel code. Use the CAD/BIM platform you are most comfortable with—AutoCAD, Tekla Structures, Advance Steel, or similar—so long as the final files open cleanly on our end. Clarity is critical: weld symbols, cut lengths, bolt schedules, plate thicknesses, and any camber or coping details must be unmistakable to the workshop crew who’ll be working strictly to local standards. Deliverables • Fabrication drawings (PDF + source files) • NC/DXF files for plate and beam proce...

We are converting our loft into a habitable room and the new dormer is almost ready now. However we've reconsidered the original place of the new loft staircase and now we need the front chimney breast disconnected at the loft level (to be removed) and the remaining chimney stack above - supported; as well as calculations and drawing of a new loft staircase opening which will be in the place of the removed chimney. Attached, you can find more details - hope these explain things better. Please let me know if you could help. Look forward to hearing back,

We are converting our loft into a habitable room and the new dormer is almost ready now. However we've reconsidered the original place of the new loft staircase and now we need the front chimney breast disconnected at the loft level (to be removed) and the remaining chimney stack above - supported; as well as calculations and drawing of a new loft staircase opening which will be in the place of the removed chimney. Attached, you can find more details - hope these explain things better. Please let me know if you could help. Look forward to hearing back,

My commercial building drawings are already at final‐design stage; I now need an Alabama-licensed architect to perform a focused code-compliance review and add an official seal so the set is ready for permit submission. All disciplines—structural, MEP, life-safety—have been coordinated, and the files are available in both Revit and PDF. I simply require your professional verification that every sheet meets current Alabama building code, followed by your signed and sealed title block. Deliverables: • Annotated review comments (if any) returned in PDF. • One digitally signed, code-compliant plan set (PDF). • Two hard-copy stamped sets mailed to my address. Please confirm your active Alabama license number in your proposal and indicate how quickly you...

We are looking for an experienced structural engineer/FRAMECAD specialist to prepare the complete LSF framing design based on the attached architectural drawings for an industrial project in Samail, Oman. Scope of Work: 1. Administration Building 2. Main Warehouse / Industrial Hall 3. Guard House All buildings shall be designed using the FRAMECAD cold-formed steel framing system. Exclusion: The separate Storage and Toilet/Service Block located at the rear of the warehouse is entirely excluded from the scope. Required Deliverables: * Structural design and calculations * Complete FRAMECAD model * Wall and roof framing layouts * Panelization, bracing and connection details * Member sizes and schedules * Fabrication/shop and erection drawings * Material/steel quantity take-off * Foundat...

I need a detailed structural report for a residential building. This report is crucial for a property sale. The report should focus on: - Foundation integrity - Overall structural stability Ideal Skills & Experience: - Licensed structural engineer - Our lender valuation report recommends one before a current market value can be given to the property we are buying.

1. Project Overview & Scope of Work We are seeking a licensed Structural Engineer (SE) to provide structural calculations, engineering details, and wet-stamped construction drawings suitable for submission to the City of San Clemente Building and Planning Divisions. The project encompasses a residential backyard terrace extension with the following specifications: Elevated Suspended Concrete Deck Platform: Dimensions: 30 feet wide by 12 feet deep (360 sq. ft.) at a finished elevation of 6 feet above local grade. Structural Slab: 4,000 PSI structural concrete mix poured over 1.5-inch 18/20-gauge galvanized corrugated steel B-decking, reinforced with a continuous deformed rebar grid mat, engineered for a 50 PSF residential live load plus dead loads. Hybrid/Split Foundation & Supp...

I need a thorough inspection of a standing seam roof installation. The inspection should cover: - Waterproofing and sealing - Structural integrity - Overall craftsmanship quality The selected freelancer will have access to detailed documents related to the installation. Ideal skills and experience: - Roofing expertise, particularly with standing seam roofs - Experience in identifying waterproofing and sealing issues - Structural assessment qualifications - Attention to detail for craftsmanship evaluation The project is crucial as there are known structural problems that need to be identified and documented.

I need a structural engineer for a residential building project. There are two things I would like to do: - I would like to remove a wall from my house and want to make sure it’s okay to do so/ what we would need to do to make it safe. - I would like to raise the roof of the second story to make a full second floor (currently much of the floor space is behind knee knee walls due to a a low roof line. Open to negotiation on whether to pay hourly or fixed. Ideal skills and experience: - Licensed structural engineer - Experience with residential structures - Proficiency in load calculations - Knowledge of building codes and regulations - Attention to detail and accuracy Please provide relevant qualifications and experience in your bids.

I need a circular concrete foundation for a tank. The estimated diameter of the foundation will be for 33' diameter tanks. There are three tanks. Geotech is complete. We need foundations for 2 33' tanks and one 10' tank. Max is 1120lbs/ft. Tank foundations need leak detection grooves and curbing 3' outside of tank diameter for containment of minor spills. Corrosive soil environment. Ideal skills and experience: - Expertise in concrete foundation construction - Knowledge of local building regulations and safety standards -

I am looking for a structural engineer with proven experience in CYPE 3D to assist me with the structural analysis of a 2P single-axis solar tracker for a Mechanical Engineering academic project. Proven experience with CYPE 3D is mandatory. Applicants must have actual experience modeling and analyzing steel structures in CYPE 3D. The project is 100% remote, and I would prefer a Spanish-speaking structural engineer based in Latin America. Experience with solar trackers, photovoltaic support structures, light steel structures, wind loads, and Eurocode 3 would be highly valued. The geometry, photovoltaic modules, structural configuration, and main loads are already defined. I also have a similar structural project that can be used as a methodological reference. I mainly need assistance w...

I need a structural engineer stamp for a new single-family geodesic dome home. Requirements: - Review and approve architectural plans - Provide necessary calculations and documentation - Ensure compliance with local building codes - Issue official stamp on plans Ideal Skills and Experience: - Licensed structural engineer - Experience with residential projects - Knowledge of local regulations and codes - Attention to detail and accuracy Please include relevant experience in your bids. Thank you!

I'm looking for an engineer to design plans for a building mezzanine that will be used as office space. The plans need to be stamped by a professional engineer and accepted by the state of North Dakota and The City of Williston Building department. Key Features: - The mezzanine will need to have partitions for separate rooms. - The design should ensure that the mezzanine can be accessed via an extension off the current mezzanine using the existing staircase. - The design must consider the load bearing capacity to ensure safety and compliance with building codes. Ideal Skills and Experience: - Professional engineering degree and credentialing - Extensive experience with commercial building design - Knowledge of North Dakota and City of Williston building standards - Ability to creat...

P.S If you dont state that this is your "Fixed price with no further negotiations or discussions" in your description as the first line , you can participate , if you want discussions it means you dont know the job SO DONT WASTE YOUR TIME OR MY TIME WHATEVER YOU BID WILL BE FINAL AMOUNT TO BE PAID SO THINK AND APPLY OR STRICTLY DONT PARTICIPATE I have a 480-sq-ft structure already standing on my property. It was originally built under an earlier permit, and now I want it officially recognized as an Accessory Dwelling Unit so someone can live in it. The city requires a fresh permit package even though the building is complete. I have already created floor plan. County requires that Kitchen, bathroom and shower has to be made in this already permitted Garage Here is where thing...

I need a fully parametric lower suspension control arm modeled in SolidWorks for an aluminum-alloy application that meets prevailing OEM standards. The part must include all typical features—mounting bosses, bushing housings, bolt holes, reinforcing ribs, generous yet realistic fillets, and thoughtful weight-reduction pockets—while maintaining structural integrity, manufacturability, and accurate fitment to the subframe. Once the 3D model is complete, I also require a production-ready 2D drawing that calls out every critical dimension, GD&T frame, hole specification, surface-finish note, and tolerance needed by a machine shop. Pay particular attention to clearance envelopes around bushings and ball-joint hardware so the arm drops straight into an existing chassis without r...

BOQ Preparation, preparation of quantities takeoff and prepare boq

I’m at the very first concept stage for a free-form, in-ground swimming pool and need a complete architectural and civil/structural design package that can move smoothly from vision to permitting and construction. Scope of work – Translate my rough ideas into a cohesive layout that optimises circulation, safety zones, decking and landscaping tie-ins. – Produce full architectural drawings (plan, sections, elevations) in CAD, ready for local permit submission. – Provide sealed structural calculations and reinforcement details for the shell, footing, retaining structures and any water features. – Recommend equipment sizing (pumps, filtration, lighting) and materials compatible with the design. – Supply a 3D model or realistic render so I can visu...

I am retrofitting a multi-storey residential building and need a complete design for a service elevator that will mainly move bulky household goods, furniture and supplies between floors. Your job is to translate the operating requirements into a fully-engineered solution that a licensed installer can build and submit for approval. Please size the car, counterweight, motor and safety gear for reliable goods transport while still meeting the quieter, low-vibration expectations of a home environment. I will provide floor-to-floor heights, shaft constraints and local code references as soon as we start; you will turn these into dimensioned GA drawings, load and power calculations, door and landing details, and a short specification covering control logic, finishes and maintenance access. Ac...

I'm seeking an experienced structural engineer inspector to evaluate a 4351 sq ft restaurant built in 1983. The building features wood roof joists and has areas where ceiling tiles can be lifted to expose structural elements. Key focus areas for inspection include: - Roof Joists - Foundation - Load-Bearing Walls - Plumbing There are existing concerns like: - Water damage - Wood rot - Raw sewage spilling out onto an exit drive Ideal skills and experience: - Structural engineering background - Experience with commercial buildings - Familiarity with plumbing issues and water damage impacts - Certification in building inspection Please provide a detailed report on the structural integrity and any necessary repairs.

I need a skilled professional to repair rust and corrosion on a staircase and fire escape of a commercial building. Key requirements: - Assess the extent of rust and corrosion - Remove rust and apply protective coatings - Repair or replace any damaged components - Ensure compliance with safety regulations Ideal skills and experience: - Background in structural repair - Experience with metalwork and corrosion treatment - Knowledge of commercial building safety standards - Ability to provide a detailed assessment and plan

I have already completed the overall layout in CAD and produced a full 3-D rendering. What I now need is a licensed professional who can turn that concept package into permit-ready construction documents for Riverside County California Project overview • Two-story traditional block home, ±2,500 sq ft • Detached block garage of similar size, built as shell space with a large roll-up door and multiple windows • Both structures will sit on a block stem wall with an 8-inch reinforced slab and rise to roughly 26 ft in height • Roof to be framed with engineered trusses and finished in concrete tiles Scope of work 1. Translate my existing CAD files into a full architectural, structural, and site set. 2. Provide all structural calculations for the block wal...

I already have a complete set of drawings for a west-coast style home with an elevated patio deck. What’s missing is a well-integrated ground-level deck and the concrete retaining wall that will structurally support the existing upper deck. Pictures of exposed rocks show a different elevation than the 3D files. The exposed bedrock (changed elevations) will need to be incorporated in the 3D model. We can provide measurement points from site as required. Style & Materials • Lower deck must read as Modern—clean lines, minimal detailing, and a strong indoor-outdoor flow. • Both the deck base and the retaining wall are to be detailed in architectural-grade concrete (no wood or composite in the structural elements). Files on hand You’ll receive the curren...

My residential building in Indore needs focused structural attention. I’m seeing cracks along several load-bearing walls as well as a slight sag in sections of the roof, and I want these issues resolved before the monsoon sets in. Scope of work • Wall repairs – diagnose all cracked areas, remove compromised plaster or masonry, reinforce as necessary (grouting, stitching, or RCC jacketing), and finish with a neat, paint-ready surface. • Roof repairs – identify the cause of sagging, strengthen joists or slabs, replace any corroded reinforcement, and reinstate proper slope and waterproofing. Acceptance criteria • No visible cracks or sags after repair and curing. • Verified structural integrity through on-site engineer sign-off. • All deb...

We are having a custom rope swing constructed similar to the one shown in the first photo and would like a structural engineer to design and verify the installation. The preliminary concept is: • 6" ID Schedule 80 steel pipe • Approximately 16' total pipe length • Approximately 12' bend radius • Approximately 4' of straight pipe extending into the ground • The dimensions can be modified if you determine different dimensions would provide a safer or structurally better design. • A rope will attach near the upper end of the curved pipe and function as a pendulum swing over the deep end of the pool. • We would like the swing post located along the wall near the concrete steps, or otherwise on the side of the pool closest to the pat...

I’m developing a new 31-metre-wide industrial facility and I want two alternative timber framing concepts, both fully compliant with AS 1720.1: • Option 1 – a timber structure with a central row of columns to shorten roof spans • Option 2 – a clear-span timber structure that covers the entire width I will supply all loading data (PV, services, wind, and lifting point). No additional environmental or sustainability standards need to be met beyond normal code-based practice. Please deliver a concise, well-presented PDF that includes: • General Arrangement plan for each option • Cross-sections • Stability / bracing elevations • One critical connection concept sketch per scheme • Summary structural calculations showing governing...

I need a local engineer to assess soil conditions for a small residential project in Truckee. Requirements: - Assess soil bearing capacity - Determine footing diameter, depth, reinforcement, and beam and post-base details and connectors. - Area: 96 sqft -structure is down slope at approx 10 and 15 degree angel. - some of the dirt on the down hill side has been removed and placed there in efforts to make a level play surface for my son. It is unsettled approx 1 1/2 feet. Ideal skills and experience: - Civil or structural engineering background - Experience with soil assessment and foundation design - Knowledge of local building codes and regulations