Microcontroller Jobs

A microcontroller refers to a small computer on a single integrated circuit consisting of a CPU, clock, ports and memory. These chips are designed for small or dedicated applications. They are used in engine control systems in cars, medical implants, remote controls, power tools and toys. Your business may need help with designing microcontroller chips. You can find such help in the form of freelancers willing and able to do microcontroller work right here. Simply post your job today to get started! Hire Microcontroller Developers

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    105 jobs found, pricing in GBP
    TEG Engineers 3 days left
    VERIFIED

    Heat Conversion in a 33mm by 100mm device

    £112 (Avg Bid)
    £112 Avg Bid
    3 bids

    FUZZY LOGIC TEMPERATURE PID CONTROLLER THINGS TO INTIGRATE 1) ESP32 2) CURRENT LOOP TRANSMITTER 3) TEMPERATURE SENSOR 4) KEY PAD 5) ROTARY ENCODER 5) LCD SCREEN WITH I2C COMMUNICATION

    £228 (Avg Bid)
    £228 Avg Bid
    4 bids
    PCB design 3 days left
    VERIFIED

    Small PCB design. PCB parts: * PIC16F690 * AO and other components to signal conversion. * Other components needed. * Switching power supply (100 mA) * Leds (green and red) ¿¿smd 1206 mounts?? * Power and signal connector from 4 to 6 vias (It can be soldering pad) * RS-232 TTL level connector (three vias) Delivereble: * Source and fabrication files (Allegro PSD 15.1 compatible prefe...

    £127 (Avg Bid)
    £127 Avg Bid
    40 bids

    We are developing a product and we are in the need to make all the electronics compatible with CE mark. It's a heater. By now it's made with arduino (5v), converters (220v to 5v) relays, resistors (220V) and a display. We have made a PCB to put all the electronics together but now we want to do the next step and make the final electrical design to be compatible with the CE mark.

    £170 (Avg Bid)
    £170 Avg Bid
    17 bids

    I want small arduino based proof of concept for LoRaWan network array of sensors. I need a prototype (breadboard style) with detailed wiring and code for reading and publishing informations for ds18b20 and lm35 temperature sensors, and HC-SR04 ultrasonic distance measuring sensors.

    £135 (Avg Bid)
    £135 Avg Bid
    7 bids

    Using an Arduino for H-Bridge Control

    £205 (Avg Bid)
    £205 Avg Bid
    32 bids

    Looking for an Experienced electronics and firmware engineer. Will provide more details to a fit candidate.

    £19 (Avg Bid)
    £19 Avg Bid
    17 bids

    I have a device using NXP K27 MCU as main processing unit and Nordic nRF52 as BLE communication module. They are connected via UART. The application firmware for both chips are ready. I would like someone to add OTA firmware update capability to the device, including: - updating K27 firmware OTA through nRF52 module when firmware update is initiated from a phone - updating nRF52 firmware OTA after...

    £22 / hr (Avg Bid)
    £22 / hr Avg Bid
    7 bids

    I am looking for an electrical engineer for Arduino project

    £146 (Avg Bid)
    £146 Avg Bid
    28 bids

    work with remote support to troubleshoot loss of signal on TV

    £39 / hr (Avg Bid)
    £39 / hr Avg Bid
    6 bids
    arduino rf reader trigger 2 days left
    VERIFIED

    Hi, I need help building a prototype. I need an arduino with an rf reader connected. The rf reader should detect a tag (either passive or active) when its 1.5meters away and make an LED connected to the arduino blink for 10 seconds. Can you build this for me?

    £83 (Avg Bid)
    £83 Avg Bid
    15 bids

    Introduction: Adapt Ideations is a technology company focussed on building the future of IoT. We are a team of IIT-B & HBS alumni working on the vision of bringing intelligence to assets using IoT and Blockchain. We have built scalable IoT products that are being used worldwide. Join us on building the next IoT platform. Check out our website [login to view URL] for more information. Qualit...

    £1238 (Avg Bid)
    £1238 Avg Bid
    9 bids

    The board consist of an LED light and a piezo electric buzzer attached to the side. It also has a battery but I will attach it myself. i was hoping to get this done within a couple of weeks. Here is a schematic let me know what you think. would you be able to program the CPU so that it receives a signal?

    £46 (Avg Bid)
    £46 Avg Bid
    20 bids

    I have a circuit layout, Im looking to get it turned into a PCB board. If done well I will need many more work done on the board after revisions etc.

    £93 (Avg Bid)
    £93 Avg Bid
    33 bids

    Currently seeking support from a specialist in RTOS, Xamarin and C#. Must have the following experience: - Detailed knowledge and solid experience of RTOS programming language (mandatory). - Experience of Xamarin plug in for android and IOS based apps (mandatory). - C# language (mandatory). - Hardware-app integration (preferred). - Microcontroller understanding (preferred). Short term contract (...

    £4117 (Avg Bid)
    £4117 Avg Bid
    17 bids

    1 - Perform communication between Arduinos using the RS-485 physical medium, read an analog and digital variable as an example. 2 - Make the communication code between the master and slave and comment on parts of the code that are important. 3 - Make the connection diagram, you can use the proteus ISIS to make the communication if you want!

    £114 (Avg Bid)
    £114 Avg Bid
    15 bids

    Recently I had a custom PCB designed and fabricated. I have not been able to get it to work and the designer I hired through Freelancer is no longer responding to my emails... :( I am new to this world and have very little experience trying to trouble shoot things. I am looking for someone to help me with the error codes I am receiving and help me get things to work as needed. Attached are t...

    £98 (Avg Bid)
    £98 Avg Bid
    12 bids

    Our runtime is build in native C and executes TIC code files build by PLC programmers. We are experiencing very poor determanistic timing on windows 10, I reasently learned that it can be caused by winodws 10 core jumping, but we need expert help on this issue.

    £77 (Avg Bid)
    £77 Avg Bid
    1 bids

    Our runtime is build in native C and executes TIC code files build by PLC programmers. We are experiencing very poor determanistic timing on windows 10, I reasently learned that it can be caused by winodws 10 core jumping, but we need expert help on this issue.

    £418 (Avg Bid)
    £418 Avg Bid
    3 bids

    My company takes automation projects. I need part time programmer for PLC and wireless communication and commissioning on sites. Project locations will be across Rajasthan

    £285 (Avg Bid)
    £285 Avg Bid
    20 bids

    Searching for someone with practical experience creating amplified circuits and corresponding Arduino sketches to accurately a proto-type. I will be assembling the hardware and testing. Need someone very knowledgeable with ultrasound to help. If you are not 100% familiar with maxsonar (single TR) type designs, please do not apply. Need appropriate voltage step up and op amp circuits. Must be...

    £60 (Avg Bid)
    £60 Avg Bid
    2 bids

    pcb designer for integrating with esp32 and sensors integrate NXP-lpc54628(LPC54628J512ET180E) quectel m66 with ESP32 and following sensors. 1] DHT11 2] Accelerometer 3] Gyro 4] Pressure 5] Vibration 6] Gas sensor 7] Moisture

    £115 (Avg Bid)
    £115 Avg Bid
    17 bids

    I need to know if there is a way to send commands to the control units of a vehicle to act on the brakes. If so, what will be needed? Can some one help me in this project ? I need to brake the vehicle by sending commands. Is it possible maybe using microcontrollers?

    £108 (Avg Bid)
    £108 Avg Bid
    5 bids

    I need Arduino software code for LoRa mesh network using RFM95 & ESP32. Only SW not HW!! NOT Peer to Peer communication!!! I need tree or mesh network. Bid only if you have the solution already developed. Test will be done using 4 devices at the same time and disconnecting and reconnecting them. The sender device will receive the OK if the message was properly received from receiver. T...

    £165 (Avg Bid)
    £165 Avg Bid
    2 bids

    Create simple arduino library to use PCA9674PW I2C I/O expander * method Init(Wire &I2cBus, bool AddressSwitch1, bool AddressSwitch2, bool AddressSwitch3); we want to have I2C as reference. The i2c wire will be declared and initialised in main project and referenced only because we need to share I2C with another devices declared in main project. * Method SetOutputs(bool Out1, bool Out2, boo...

    £39 (Avg Bid)
    £39 Avg Bid
    1 bids

    Create simple arduino library to use Display DEM 256128A FGH-PW with ST7565 (datasheet included) * method Init(Wire &I2cBus, bool S1, bool S2); we want to have I2C as reference. The wire will be declared and initialised in main project and referenced only. S1 = LCD pin D6 S2 = LCD pin D7 * Method WriteText(uint_8t Line, uint_8t Column, uint_8t Size, string Text); We need up to 5 sizes...

    £29 (Avg Bid)
    £29 Avg Bid
    2 bids

    Our runtime is build in native C and executes TIC code files build by PLC programmers. We are experiencing very poor determanistic timing on windows 10, I reasently learned that it can be caused by winodws 10 core jumping, but we need expert help on this issue. [login to view URL] [login to view URL] This is basicly our probelm: Start time = time_in_micros sleep(1) End time = time_in_micros The di...

    £253 (Avg Bid)
    £253 Avg Bid
    2 bids

    Our runtime is build in native C and executes TIC code files build by PLC programmers. We are experiencing very poor determanistic timing on windows 10, I reasently learned that it can be caused by winodws 10 core jumping, but we need expert help on this issue. [login to view URL] [login to view URL] This is basicly our probelm: Start time = time_in_micros sleep(1) End time = time_in_micros The di...

    £88 (Avg Bid)
    £88 Avg Bid
    3 bids

    Our runtime is build in native C and executes TIC code files build by PLC programmers. We are experiencing very poor determanistic timing on windows 10, I reasently learned that it can be caused by winodws 10 core jumping, but we need expert help on this issue. [login to view URL] [login to view URL] This is basicly our probelm: Start time = time_in_micros sleep(1) End time = time_in_micros The di...

    £8 - £14 / hr
    £8 - £14 / hr
    0 bids

    The job is complete the code part of an already existing app , that controls mesh smart lamps via bluetooth. thre is some futures needed to be added , described in the attached document. creating the ui/ux is not needed. the arduino programming of the esp32 microcontroller is already done by someone.

    £331 (Avg Bid)
    £331 Avg Bid
    12 bids
    PCB design in easyEDA 16 hours left
    VERIFIED

    I have prototype product for esp32 and now I wan't pcb design for esp32 shield. I expect that you are professional for pcb to get it printed without any problems. In the end shield would be 18 screw terminals, power jack connector and place for esp32 dev board. Also size should match my spec. I want that project is done in easyEDA and also shared ther with me. I will hired again people when ...

    £124 (Avg Bid)
    £124 Avg Bid
    23 bids

    I want a custom pcb designing to hold Raspberry Pi 3 compute module. The board will require: 1 x DDR2 SODIMM RAM Connector which must be TE CONNECTIVITY 1473005-4 micro usb power in 5v @ 3A 2 x type a usb connectors full size HDMI output CONN_02X60 connected to +5v, GND, SND, SCL real time clock + battery Included is a simlair project and data sheets that may be of use as a basis for this cus...

    £240 (Avg Bid)
    £240 Avg Bid
    15 bids

    This job is for experienced users of the dsPIC30F4011. I would like someone to code a program in MPLAB. The coding language should be C. The program should capture numbers from a 4x4 keypad matrix. In order to activate the keypad, the star(*) key should be pressed. To finish entering the number, the hash(#) key should be pressed. To clear an entry and start again, the D key should be pressed. The ...

    £93 (Avg Bid)
    £93 Avg Bid
    8 bids

    I have this electroincs board about 5*5 cm in size that i need to shipfrom Pakistan to Thailand. I am looking for guidance from some one who has shipping experience with electronics boards.

    £27 (Avg Bid)
    £27 Avg Bid
    1 bids
    Arduino and IoT project 9 hours left
    VERIFIED

    Hi, We are looking for someone who can develop the following prototype: - The system has two main parts: a) Via infrarred or RF, a remote control will send a signal to Arduino UNO (or nano). (This part is already developed, so nothing to do herre). b) Arduino gets the signal and synchronize it with a Tuya Smart Life compatible IP Camera. As you know, by using the Smart Life App, the presets of th...

    £21 (Avg Bid)
    £21 Avg Bid
    5 bids

    Arduino Embedded expert for multiple job. Details will be shared

    £15 - £128
    Sealed
    £15 - £128
    104 bids
    raspberry PI 3 days left

    I need the raspberry PI expert for multiple jobs . Details will be shared with winning bidder.

    £15 - £128
    Sealed
    £15 - £128
    22 bids

    PCB (printed circuit Board) expert for multiple jobs. Details will be shared.

    £16 - £129
    Sealed
    £16 - £129
    84 bids

    Me gustaria que me ayudaran a desarrollar un software para capturar la informacion en de lo pulsos de un arduino en una base de datos. Y hacer un sistema para medir la produccion, contar las piezas x hora etc.

    £9 / hr (Avg Bid)
    £9 / hr Avg Bid
    7 bids

    Busco realizar un control de humedad y temperatura utilizando una placa de arduino o NodeMCU o ESP32. Necesito que pueda mantener la temperatura y humedad de una caja de plástico. Si la temperatura es inferior a X grados celsius, debe encender una salida digital que se conectara a una placa calefactora. Si la temperatura es muy alta, se debe activar una salida digital con un ventilador para...

    £93 (Avg Bid)
    £93 Avg Bid
    11 bids

    Se busca profesor para dar clases personalizadas de Arduino.

    £5 / hr (Avg Bid)
    £5 / hr Avg Bid
    5 bids