Electronics Jobs

Electronics is the branch of science and technology that makes use of the motion of electrons for accomplishing some tasks like information handling or device control. If your business is about electronics engineering and electronic circuits, then you will not have much time to focus on engineering aspect of your business. You can easily outsource electronics engineering to capable and willing freelancers as a matter of routine. Post a job today to find your electronics talented freelancer!

Hire Electronics Engineers

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    191 jobs found, pricing in GBP

    Hello We need an expert in Wireless communication. Please apply if you have the required expertise.

    £119 (Avg Bid)
    £119 Avg Bid
    7 bids

    In this project, I need help to code for all the electronic components that I have to form a functional device with different modes of operation and function. All hardwares are connected and I have a snip of code for each component. Need help to integrate them.

    £85 (Avg Bid)
    £85 Avg Bid
    10 bids

    Two boards, the first reads two potentiometers and three simple press button switches and then passed this information serially to a second board. The second board has an audio input and two digital pots. It used the vales to raise or lower the incoming audio signal to provide a signal to a connectored amplifier. The volume is also passed onto a connected PC via a USB connection. Ideally all leade...

    £483 (Avg Bid)
    £483 Avg Bid
    16 bids

    Hello We need an expert in Wireless communication. Please apply if you have the required expertise.

    £90 (Avg Bid)
    £90 Avg Bid
    5 bids
    Camera device driver coder 4 days left
    VERIFIED

    Looking for Camera device driver coder/programmer for raspberry pi4.

    £52 (Avg Bid)
    £52 Avg Bid
    1 bids
    Simulink Expert -- 2 4 days left
    VERIFIED

    Please check attach files for project scope

    £166 (Avg Bid)
    £166 Avg Bid
    4 bids

    Need help implementing robotic process automation in matlab

    £115 (Avg Bid)
    £115 Avg Bid
    6 bids

    Need a power world simulator expert for my project of 37 bus system

    £46 (Avg Bid)
    £46 Avg Bid
    2 bids
    Simulink Expert 4 days left
    VERIFIED

    I need to implement control strategy in the project. please read details in attached file. Simulink model also attached.

    £10 (Avg Bid)
    £10 Avg Bid
    6 bids

    You have to make firmware for BLUENRG232 for i2c communication with a sensor. The board is ready. I have ST link V2

    £10 / hr (Avg Bid)
    £10 / hr Avg Bid
    8 bids

    Hello, I have an Arduino Nano which reads 2 Analog inputs and send them over serial interface to a computer. On the computer side I have a C# application which reads the data in real time, plots an X vs Y graph, performs some calculations and prints report in word or pdf from a given template. The arduino side is very easy and already done. The C# application is partially done, the HMI interface ...

    £100 (Avg Bid)
    £100 Avg Bid
    7 bids

    Job Description :-   We are a group building high performance configurable ASIC IPs that can fit inside a variety of products ranging from low power IoT ASICs to good performance Desktop/Server ASICs.  The work centers around some of the advanced areas of chip design such as Cache Coherency, Virtual Channels and traffic performances, Pipelining for high-speed data and control logic...

    £268 (Avg Bid)
    £268 Avg Bid
    3 bids

    A passionate engineer. A firmware for andriod tv box

    £23 - £31
    £23 - £31
    0 bids
    Electronic Board Design 4 days left
    VERIFIED

    For my company product, we need to build an electronic board. The board should be versatile so that it can be used for more than one application. Further details will be shared on call or chat..

    £91 (Avg Bid)
    £91 Avg Bid
    9 bids
    Electronic Board 4 days left
    VERIFIED

    For my company product, we need to build an electronic board. The board should be versatile so that it can be used for more than one application. Further details will be shared on call or chat..

    £88 (Avg Bid)
    £88 Avg Bid
    5 bids

    The device is a therapeutic music player that can play mp3 files through an audio jack. the unit needs multiple modes for playing music or to activate an attached vibration motor. the unit need to display the modes through an attached lcd and be controlled by outer buttons. the buttons need to control volume time and trace or modes. the tracks will be stored on a removable sd card that can be down...

    £368 (Avg Bid)
    £368 Avg Bid
    34 bids

    Need some arduino expert to connect my arduino board (UNO) wifi chip and and air pressure sensor and show result on blynk by measuring the air pressure

    £28 (Avg Bid)
    £28 Avg Bid
    12 bids

    I need a professional with years of experience with battery design , working current, size, discharge working current. so with that there won't be any problem with work. More will be discussed on chat thank you.

    £25 (Avg Bid)
    £25 Avg Bid
    3 bids

    Looking for an advisor and coder to help me develop a product using a Raspberry Pi, Touch screen, HX711 board, and load cell. The system must auto-boot into a user interface displaying the current load. Along with a zero button. A weight 'Hold' system would also be appreciated once the scales have determined the correct weight. Saving previous data and being able to look back at the hist...

    £192 (Avg Bid)
    £192 Avg Bid
    16 bids

    Hi, header of project says all. i want you to write me code for getting 8x 1 wire temp sensor (DS18B20) addresses automaticially and getting the sensor temperature in arduino. after that write the temperature value to two connected i2c devices from HORTER and display value as 0,2V-10,0V DC for -30°C until 50°C temperature. Only Payment after full finish of project. Give real amount as of...

    £111 (Avg Bid)
    £111 Avg Bid
    11 bids

    Hey there I need to make a circuit which is small and has to have below functionality 1. It should show current time 2. Switches to set current time and multiple alarms 3. Supported by rechargeable battery and battery life of 100 days once charges 4. BOM cost to be as low as possible 5. Battery charger circuit and relay based alarm to be operated by 230V supply

    £250 (Avg Bid)
    £250 Avg Bid
    11 bids

    I am working on recliner chair I need some one to develope arduino programming for operate 3 [login to view URL] chair there are 3 motors for height, back recline and handle [login to view URL] motors are with hall effect sensor circuits for motor positioning.

    £66 (Avg Bid)
    £66 Avg Bid
    11 bids

    I am looking for Electronic Engineer with Xilinx, Verilog, Altium experiences. I am also Engineer, but I need partner. Thanks.

    £14 / hr (Avg Bid)
    £14 / hr Avg Bid
    15 bids

    Simple board, probably 2 layers. Made up mainly of connectors. Has a few mechanical constraints so that it can fit a premade fantray and also mount a raspberry pi. Can provide a .dsn, pads netlist, bom, and pdf schematic.

    £274 (Avg Bid)
    £274 Avg Bid
    52 bids
    power system expert needed 4 days left
    VERIFIED

    i want long term employee. if you are expert in power system. please bid here

    £2 / hr (Avg Bid)
    £2 / hr Avg Bid
    9 bids
    £22 Avg Bid
    10 bids
    computer systems 4 days left
    VERIFIED

    Aims,To facilitate an understanding of computer hardware and systems software and of assembly language programming. Understand the hardware components of a computer and the functions they perform. 2. Understand the overall behaviour of compilers, assemblers, linkers, and interpreters. [login to view URL] some trade-offs between hardware and software that occur in computer system design. [login to...

    £20 (Avg Bid)
    £20 Avg Bid
    4 bids

    a 4 question worksheet need to finish within 1 and half hour some maths questions related to antenna design

    £17 (Avg Bid)
    £17 Avg Bid
    9 bids

    Review and recommend improvements or alternative engineering solution for a plc driven plant production system. Identify where best practices can be implemented and improvements. Lastly, identify latest technology that my substitute the solution (SCADA, IoT, PAC, etc...) Platform contains: Unilogic PLC, Load Cells, AC or DC Motors, Contacts, Switches, Relays, RS232, Solenoids

    £85 (Avg Bid)
    £85 Avg Bid
    7 bids
    Arduino simple task 4 days left
    VERIFIED

    Hi, I am looking for arduino expert to do a simple task.

    £15 (Avg Bid)
    £15 Avg Bid
    10 bids

    I am looking for sensors for a water quality project. The aim is to continuously monitor the following water parameters: 1. Free Chlorine 2. Oxygen Reduction Potential (ORP) 3. Total Chlorine 4. Combined Chlorine 5. pH 6. Temperature 7. Ozone 8. Total Dissolved Solids (TDS) 9. Salinity 10. Electrical Conductivity 11. Total Alkalinity 12. Turbidity 13. Cyanuric Acid I am looking to interface with ...

    £18 (Avg Bid)
    £18 Avg Bid
    11 bids

    I am looking for an experienced engineer that will come up with a proper circuit and then translate it to production ready PCB. This is supposed to be a desktop USB microphone like the razer seiren for example and it will contain a potentiometer for the microphone volume, a mute button and two rgb lights. I would like to emphasize on on the sound quality as much as possible so that first of all ...

    £184 (Avg Bid)
    £184 Avg Bid
    10 bids

    Should do the simulink for the vbs models for depth and trim control

    £15 / hr (Avg Bid)
    £15 / hr Avg Bid
    3 bids

    I need the answers urgently within one hour

    £9 (Avg Bid)
    £9 Avg Bid
    4 bids

    Hello! I have a project I'd like to find someone to build a prototype for. If the prototype turns out well, I may request to order a larger quantity after final revisions. The idea came from this video: [login to view URL] I would like you to design something similar using a mk2 (1984-1992) Volkswagen door chime relay, or equivalent. You could retrofit an old relay, but what's really...

    £129 (Avg Bid)
    £129 Avg Bid
    10 bids

    Arduino level project building and documenting a remotely controlled LED bracelet, wand, medallion

    £15 / hr (Avg Bid)
    £15 / hr Avg Bid
    23 bids

    Design of the shunt active power filter to mitigate harmonic caused by nonliner load Saya nak upah untuk bina 4 litar shunt active power filter menggunakan matlab 1)circuit shunt active power filter using DQ theory 2) circuit shunt active power filter using PQ theory 3) circuit shunt active power filter using DQ theory combine with fuzzy 4) shunt active power filter using PQ theory combine wi...

    £61 (Avg Bid)
    £61 Avg Bid
    3 bids

    create a prototype, 3d design and Working simulation of my digital gym equipment.

    £97 (Avg Bid)
    £97 Avg Bid
    5 bids

    Displayed is a layout for programming a custom made industrial entertainment microcontroller. Which consists of a mobile application to be used on a phone which will connect to device either through Bluetooth , WiFi or direct connection Screen will auto load a default layout which by clicking and adding highlighted areas for each field will correspond to an amount of time an output will be ene...

    £404 (Avg Bid)
    £404 Avg Bid
    12 bids

    Looking to build a large scale energy storage solution. Components to be used, HVAC, fire suppression, Li ion batteries as well inverter/charge/BMS

    £124 (Avg Bid)
    £124 Avg Bid
    4 bids

    I need to develop an Android APP to control a 8 channel relay standard board controlled by USB wired signals. the android deviced will be wired connected to the relay board. Bluetooth/Wifi conection also required (in case android device is not wired connected). Objective of the system: control on/off from android app (main option: device phisically installed in the vehicle or secondary: cellph...

    £374 (Avg Bid)
    £374 Avg Bid
    23 bids

    Need electrical telecommunications and robotics engineer. Design elementary engineering toys.

    £8 / hr (Avg Bid)
    £8 / hr Avg Bid
    6 bids
    Develop 4-channel datalogger 3 days left
    VERIFIED

    The scope of this project is to develop a 4-channel datalogger and Android application to control it. Requirements for the characteristics of the analog inputs: - number of analog inputs - 4; - signal sampling frequency - 50 kS / s per channel; - 14 bit ADC (better to use 16 bit ADC); - input voltage range: 2 inputs with a range of ± 20 V, and 2 inputs with a range of ± 200 V; - mul...

    £876 (Avg Bid)
    £876 Avg Bid
    11 bids
    Bootloader 3 days left
    VERIFIED

    I want someone who is good in implementing bootloader and can work on tc387 controller and implement the following features, Support CAN based UDS protocol o Support NVM for internal Flash – EEPROM emulation o Support primary & secondary Bootloader mirroring, the secondary bootloader is downloaded in RAM memory by the primary bootloader o Support portioned flashing o Support software...

    £1048 (Avg Bid)
    £1048 Avg Bid
    1 bids
    TEG Engineers 3 days left
    VERIFIED

    Heat Conversion in a 33mm by 100mm device

    £112 (Avg Bid)
    £112 Avg Bid
    3 bids

    FUZZY LOGIC TEMPERATURE PID CONTROLLER THINGS TO INTIGRATE 1) ESP32 2) CURRENT LOOP TRANSMITTER 3) TEMPERATURE SENSOR 4) KEY PAD 5) ROTARY ENCODER 5) LCD SCREEN WITH I2C COMMUNICATION

    £228 (Avg Bid)
    £228 Avg Bid
    4 bids
    PCB design 3 days left
    VERIFIED

    Small PCB design. PCB parts: * PIC16F690 * AO and other components to signal conversion. * Other components needed. * Switching power supply (100 mA) * Leds (green and red) ¿¿smd 1206 mounts?? * Power and signal connector from 4 to 6 vias (It can be soldering pad) * RS-232 TTL level connector (three vias) Delivereble: * Source and fabrication files (Allegro PSD 15.1 compatible prefe...

    £127 (Avg Bid)
    £127 Avg Bid
    40 bids

    We are developing a product and we are in the need to make all the electronics compatible with CE mark. It's a heater. By now it's made with arduino (5v), converters (220v to 5v) relays, resistors (220V) and a display. We have made a PCB to put all the electronics together but now we want to do the next step and make the final electrical design to be compatible with the CE mark.

    £170 (Avg Bid)
    £170 Avg Bid
    17 bids
    L-edit VLSI 3 days left
    VERIFIED

    design in L-edit.................................

    £33 (Avg Bid)
    £33 Avg Bid
    3 bids

    I want small arduino based proof of concept for LoRaWan network array of sensors. I need a prototype (breadboard style) with detailed wiring and code for reading and publishing informations for ds18b20 and lm35 temperature sensors, and HC-SR04 ultrasonic distance measuring sensors.

    £135 (Avg Bid)
    £135 Avg Bid
    7 bids

    Top Electronics Community Articles