Construction Jobs

I'm looking for an experienced construction supervisor to oversee a number of residential projects from start to finish. The project is currently in the planning and design phase. Key Responsibilities: - Supervise all phases of construction - Ensure project stays on schedule and within budget - Coordinate with architects, contractors, and other stakeholders Ideal Skills and Experience: - Proven experience in residential construction supervision - Strong project management skills - Excellent communication and coordination abilities - Knowledge of building codes and permit processes Looking for someone who can ensure a smooth and successful construction process.

I’m ready to translate my new-build floor plan into a precise interior wall framing layout. The concept is a traditional room arrangement that clearly defines each space rather than an open plan. The finished design must show a living room, kitchen, and three separate bedrooms, with stud positions, door and window openings, and all critical dimensions called out so my framer can move straight from the drawings to the job site. Please provide: • Scaled floor-plan drawings (PDF + source file) showing every interior wall, clearly marked. • A framing legend or schedule that specifies stud size, spacing, header details, and any load-bearing notes. • A simple wall-count or materials take-off would be appreciated if it fits your workflow. I’ll supply any addition...

The PDF drawings for my pavilion—well over 400 sq ft—are ready, and I now need a precise, purchase-ready material takeoff. Every stick of lumber called out in the plans must be specified as pine, and all anchors, straps, and connectors must reference the exact Simpson Strong-Tie part numbers the plans require. There are several custom structural details in the drawings, so the list has to capture those non-standard members and any associated hardware rather than defaulting to generic items. Please work directly from the PDFs, pull every beam, post, rafter, purlin, joist hanger, bolt, screw, and piece of hardware, and summarise them in an organised spreadsheet or marked-up table. Quantities, dimensions, grades, and manufacturer SKUs should be crystal-clear so I can hand the she...

I need a professional to check the flatness of a concrete floor using a laser level. The area is between 500 - 1000 sq ft. Ideal skills and experience: - Experience with concrete and flatness measurements - Proficiency in using a laser level - Attention to detail

I need an experienced professional to assist with the interior renovation of my apartment. The project involves the demolition of two concrete walls. Key Requirements: - Verify that the walls are not load-bearing - Use blueprints for accurate execution Ideal Skills and Experience: - Experience with concrete wall demolition - Ability to read and interpret blueprints - Structural engineering knowledge is a plus - Strong attention to detail and safety compliance

More details: Is this project for business or personal use? Personal What information should successful freelancers include in their application? Experience How soon do you need your project completed? ASAP

We are seeking a professional communicator experienced in the construction sector to help connect with potential clients in UAE, US, UK, and Middle East regions for our custom ERP solutions. Your role will involve: - Identifying and reaching decision-makers within construction companies (Owners, Project Managers, Finance Heads). - Nurturing relationships from initial outreach to setting up meetings. - Arranging and facilitating client meetings to showcase our ERP solutions. Payment Structure: This is a completely incentive-based role. Once freelancers successfully complete the set project goals, milestone payments will be created and released here on this platform as per achievement of results. Preferred Experience: - Expert in professional communication and sales outreach. - Understand...

I'm looking for a reliable and professional builder to create approved city building plans for a composite deck. The plans should incorporate: - Space for finishing the bottom of the deck - Provision for running an electrical box for lights or fans - Area for screening in part of the bottom of the deck Ideal skills and experience: - Expertise in deck design and city approval processes - Proficiency in working with composite materials - Experience with electrical and screening integrations

I need a detailed sales estimate sheet for commercial playground and park amenities sales and installation. The sheet should include: - Materials - Commercial playground and park amenities sales and installation Each item or service must have: - Item description and quantity - Unit price and total cost - Installation time and labor Ideal skills and experience: - Proficiency in spreadsheet software (Excel, Google Sheets) - Experience in construction or related industries - Attention to detail and accuracy

Understood! Here's the revised draft: Title: B2B Lead Generation Specialist for Construction Industry (UAE & Specific Regions) Description: We are looking for an experienced professional in the construction sector to connect with potential clients specifically in UAE, US, UK, and other Middle Eastern regions. Your responsibilities will include: - Identifying decision-makers (Construction Owners, Managers). - Nurturing relationships from outreach to setting up client meetings. - Collaborating with clients to understand their unique requirements for customized ERP solutions. Requirements: - Extensive knowledge of the construction industry. - Proven experience in professional communication and outreach. - Familiarity with LinkedIn or similar platforms is a plus. ...

I need a skilled contractor to reinforce an existing wooden roof truss that is cracked. The job requires: - Assessment of the current structural integrity - Reinforcement of the existing structure to ensure stability and safety Ideal skills and experience: - Experience with wooden trusses - Knowledge of structural reinforcement techniques - Familiarity with safety standards and building codes Please provide a detailed plan and timeline for the project.

Need UAE-Based Freelancer / Connector for Construction Industry Projects We are looking for a UAE-based freelancer (or someone experienced in the UAE construction industry) to help connect us with construction companies that may require custom ERP or software solutions. Your role: - Identify construction companies in UAE - Reach decision-makers (Owners, Directors, Operations Managers, Finance Managers, Project Managers) - Understand if they have software/ERP/automation requirements - Arrange meetings with interested companies - Help create business opportunities We build customized ERP/software solutions based on client requirements, so this role is focused on communication, networking, and connecting opportunities not direct selling. Preferred: - Experience with UAE construction ind...

I need a quick, on-site photo survey of a construction site. You’ll visit the location, capture 1–10 high-resolution images, and make sure every shot records both the GPS coordinates and the exact date and time. The emphasis is on a clear site survey view, so wide angles that show the overall state of the project are preferred. Deliverables • 2-3 original JPEGs with embedded GPS data • Visible or metadata time-stamp on each file • Short note listing photo numbers with a brief description of the angle or area shown Use any modern smartphone or camera that writes EXIF geotags; no post-editing beyond adding the stamp if your device doesn’t overlay it automatically. Once the photos pass a quick check for location accuracy and time consistency, the job i...

I need a 1000-gallon water storage tank structure made of steel. The tank will be located above ground. Drawings only include the structure not the tank. Requirements: - Design and fabrication of a steel structure - Suitable for above-ground installation by base plates and anchors - Must be durable and corrosion-resistant - Welded to AWS D1.1 code as well as ASTM A36 steel - Compliance with relevant safety and building codes -Must be a simple 4-legged structure with proper/to code cross bracing Ideal Skills and Experience: - Experience with metal fabrication and tank construction - Knowledge of water storage regulations - Structural engineering expertise is a plus

I need a skilled contractor to build an attached RV garage that is fully finished with the following features: Interior Finish: - Drywall and paint Storage: - Storage cabinets and heavy-duty shelving - Separate storage room Golf Simulator Area: - Advanced setup with impact screen and sensors Ideal skills and experience: - Proven experience in building garages - Expertise in drywall installation and painting - Knowledge of golf simulator setups and requirements - Strong organizational skills for integrated storage solutions Please include relevant experience and a portfolio with your bids. Looking forward to your proposals!

Three small projects in my kitchen and nearby walls need a capable set of hands: • Lift and replace the existing vinyl plank flooring in the kitchen. • Patch a few minor dents and nail holes, then repaint the affected wall areas so the finish blends cleanly. • Remove the damaged laminate on one kitchen cabinet door and bond a new laminate sheet with tidy edging. All core materials—new planks, matching paint, laminate sheet, adhesive, trim pieces—can be sourced by myself, and I can pick up anything else you specify. Space will be cleared before you arrive and the home will be empty To help me choose quickly, include a brief note on similar repair or install jobs you’ve handled; a couple of photos or a line about years in the trade is perfect.

I already have a Home Designer Pro (.plan) file for a single-family home—3 bedrooms, 2 baths, with one bedroom designated as an office. The layout is locked, so your task is to translate this plan into a complete, permit-ready blueprint set in Chief Architect while preserving the Craftsman style I’ve chosen. Your drawings must include everything a county reviewer expects: fully dimensioned floor plans, elevations, roof and framing details, foundation, electrical and plumbing layouts, schedules, and a printable title block. Room sizes, wall positions, and door/window specs must match the source file exactly; only refinement and annotation are needed. Milestones • $100 – Preliminary conversion: supply the native Chief Architect file plus initial floor plan and exte...

I'm looking to add a second story to our factory office to create additional private office space. Requirements: - Construction of a second story - Layout to include 4-6 private offices Ideal skills and experience: - Experience in commercial construction and office design - Ability to ensure structural integrity and compliance with local building codes - Project management skills to oversee the entire process Please provide a detailed proposal with your approach, timeline, and budget breakdown.

I need a 1000-gallon water storage tank structure made of steel. The tank will be located above ground. Drawings only include the structure not the tank. Requirements: - Design and fabrication of a steel structure - Suitable for above-ground installation by base plates and anchors - Must be durable and corrosion-resistant - Welded to AWS D1.1 code as well as ASTM A36 steel - Compliance with relevant safety and building codes -Must be a simple 4-legged structure with proper/to code cross bracing Ideal Skills and Experience: - Experience with metal fabrication and tank construction - Knowledge of water storage regulations - Structural engineering expertise is a plus

I am looking for a skilled designer or engineer to create a custom-sized aluminum pergola carport designed primarily for shade and shelter. The pergola should embody a modern and sleek aesthetic, with clean lines and a contemporary finish. Experience in designing and constructing aluminum structures, particularly pergolas, is essential. Knowledge of materials, durability, and weather resistance is important for this project. I look forward to collaborating to bring this vision to life. Need Florida Professional Engineer stamped drawings.

I need help tackling a few exterior jobs on my mobile home in Spruce Grove, AB. The priority is the wood deck: cutting replacement boards to size, fastening them securely, and giving the entire surface a fresh coat of paint. Once the deck is solid and looking sharp, I’d like the same coat of paint carried through to trim and any other weather-worn spots around the unit. Work would also include painting of a small shed, and replacement of skirting on a mobile home. Scope of work • Wood deck repair – cut, fit, and install new boards where needed, then sand and prep for paint • Painting – apply exterior-grade paint to the rejuvenated deck and select trim areas Please bring your own basic carpentry and painting tools; most tools will be provided. I’ll h...

I’m renovating a three-storey townhouse and already have floor plans plus an AI-generated façade concept I’m happy with. What I now need is a cohesive package that unites the two. Here’s the scope: • Update the existing drawings so the interior layout and structure truly work. That means tightening room layouts and correcting any structural conflicts you spot along the way. • Develop the exterior façade so it mirrors the AI concept, staying faithful to its industrial vibe—think honest materials, clean lines and a hint of warehouse character. • Produce clear, construction-ready floor plans and elevations. • Deliver a set of polished 3D renders (daylight and evening preferred) that showcase at least a couple of material/colour...

I have a medium-sized backyard tree that I’d like to turn into a safe, all-natural play space for my kids. I need an experienced designer to create both architectural plans and a detailed 3D rendering that a local carpenter can follow without guesswork. Core features to integrate • Two wooden decks – a lower platform for easy access and a higher, fenced deck that doubles as a lookout spot. • A small climbing wall that ties cleanly into the trunk or supporting posts. • Spider-web style climbing ropes that connect the ground to the upper deck. Design guidelines • Multiple levels are essential; please make clever use of the existing tree structure while protecting its health. • Materials must stay natural: timber, rope, hardware in muted fini...

I'm looking for a skilled contractor to help with a home addition and remodel. The primary purpose of this project is to create extra living space, specifically by adding a bedroom with an en suite bathroom, expanding the living room, and switching the kitchen and dining room areas. The new living space will need to connect to the kitchen. Ideal skills and experience: - Expertise in home additions and remodels - Experience with kitchen and dining room reconfigurations - Ability to design and construct en suite bathrooms - Strong understanding of space optimization and layout design I have a set of design and construction plans for a prior iteration of this expansion/remodel that we have decided not to use. It shows the dimensions of the existing home. I have prepared a sket...

I’m finalising a 40 m² jewelry boutique and now need a complete set of shop-ready execution drawings. Every sheet must be production-grade: precise, dimensioned, and clear enough for both the workshop and the site crew to build from without extra clarification. Scope of work I will supply the architectural shell and concept sketches; you will translate them into a coordinated drawing package that includes: • Detailed layout plans (all dimensions, fixed and loose elements) • Reflected ceiling plan with lighting integration • Electrical layouts for lighting, sockets, switches, CCTV, and power lines • Mechanical plans covering AC supply, return, and ventilation routes • Flooring pattern and finish plan • Full wall elevations and key secti...

I'll accept price you put on your bid it's small project for $10. please bid if you accept price and you'll do promptly. I need to make several AutoCAD diagrams for an architectural project. I've attached below what exactly needs to be done. I'll send you the finished file with the site in DWG format. The only thing that needs to be drawn manually is a site plan for Veliky Novgorod. All drawings will need to be framed and labeled on sheets as in the examples. if 's not difficult, I have the entire drawing ready and I'll send it to you. I just need to mark the territories of the sanitary protection zone and so on at different scales, that's why the price is so high. As for the general plan, I don't need it. I need a sitkatsiutonnytsya plan. It...

I need detailed plans for a wooden 3-post pergola with two chair swings on each beam (unless structurally this isn’t sound). The swings should be arranged around a circular firepit. I live in Chicago area 6a zone. Prefer bracketing where possible for easier installation. No pergola cross beams for style needed. Just poste, beams, etc Requirements include: - Accurate measurements and dimensions - Assembly instructions - Material list Ideal Skills: - Experience in outdoor structure design - Proficiency in woodworking - Ability to create clear and detailed plans

I’m ready to have my interior walls finished with high-quality porcelain tiles and need a seasoned mason or tiler who can handle the job from surface prep to the final polish. The walls are already framed and plastered; what’s missing is a precise, durable tile installation that looks seamless and will last. I chose porcelain over ceramic or natural stone because of its low porosity and sleek look, so experience working specifically with porcelain is essential — accurate cutting, proper adhesive selection, and even grout lines are non-negotiable. You’ll inspect the walls, confirm they’re perfectly level, recommend the right adhesive and grout, lay the tiles with minimal lippage, and leave the workspace spotless. Bring your own professional-grade tools (wet sa...

I need a skilled carpenter to rebuild two exterior doorframes. Back door is a french door that also has subfloor rotting just in front of the door on the interior. Then help me hang and level those doors. Requirements: - Material: Wood - Style: Traditional - Finish: Natural (no paint or stain) - Freelancer must bring their own tools, except for a miter and table saw, which will be provided. Ideal Skills & Experience: - Proficiency in working with traditional wood designs - Experience in constructing and installing wooden doorframes - Attention to detail for a natural finish

I'm seeking assistance in applying for a new driveway permit for a project over 100 feet. Requirements: - Knowledge of local regulations and requirements for driveway permits. - Experience in filling out and submitting permit applications. - Ability to provide guidance on necessary documentation and information needed for a successful application. Ideal Skills and Experience: - Familiarity with concrete, asphalt, and gravel driveway installations. - Previous experience in obtaining permits for construction or landscaping projects. - Strong organizational and communication skills. Please provide a detailed plan on how you would assist with the permit application process.

During an upcoming business-negotiation session in Foshan, I will need seamless, simultaneous interpretation between Chinese and English so that all participants can follow the discussion in real time. The setting will be a formal meeting room, and the conversation is expected to cover contract terms, pricing, and partnership details, so familiarity with commercial vocabulary and negotiation etiquette is essential. Please be comfortable working in a booth or with portable equipment, keeping up with fast back-and-forth dialogue, and conveying tone as well as meaning. Prior experience in high-stakes business talks is strongly preferred; references or brief case studies demonstrating past work will help me gauge fit quickly. Deliverables: • Real-time simultaneous interpreting for the f...

Hello, I am looking for a licensed New Jersey Professional Engineer to evaluate an inground vinyl pool wall collapse in South Jersey. The contractor drained all of the water out of my inground vinyl pool during work in 2025. The pool wall later collapsed, leaving the pool unusable and causing major damage. My homeowner’s insurance claim was denied, and the denial referenced poor workmanship. I am trying to determine whether fully draining the pool, improper workmanship, soil pressure, hydrostatic pressure, or failure to properly protect the pool structure contributed to the collapse. Because I am working with limited funds, I would like to start with the most cost-effective option first, such as an initial consultation, site inspection, or limited written opinion letter. If neede...

Job Title Freelance Trainer – Rebar CAD & CADS RC Job Description We are looking for an experienced Freelance Trainer to provide training in Rebar detailing using CAD and CADS RC software. The training will focus on teaching the fundamentals and practical workflow used in reinforcement detailing for construction projects. The trainer should be able to guide students or professionals in understanding reinforcement concepts, CAD tools, and detailing techniques. Responsibilities • Conduct online training sessions on Rebar detailing using CAD and CADS RC • Teach reinforcement detailing concepts and drafting techniques • Demonstrate preparation of reinforcement drawings and bar bending schedules (BBS) • Provide practical examples and exercises for learning &b...

I’m looking for someone in Uganda to research the roof tile manufacturing business and provide real, on-the-ground information. I prefer someone who can directly contact business owners, factory operators, or craftsmen and gather first-hand insights. Examples of the type of businesses I’m interested in: * Very small-scale/manual production (home or workshop based), like: Automated or semi-automated factory style The goal is to understand whether this business could be profitable and scalable in Uganda. I need detailed information such as: * Typical startup costs (machines, materials, workspace, labor, etc.) * Profit margins and average selling prices * Production capacity per day/week * Demand in the local market * How difficult it is to find customers * Main competitor...

I’m looking for someone in Kenya to research the roof tile manufacturing business and provide real, on-the-ground information. I prefer someone who can directly contact business owners, factory operators, or craftsmen and gather first-hand insights. Examples of the type of businesses I’m interested in: * Very small-scale/manual production (home or workshop based), like: Automated or semi-automated factory style The goal is to understand whether this business could be profitable and scalable in Kenya. I need detailed information such as: * Typical startup costs (machines, materials, workspace, labor, etc.) * Profit margins and average selling prices * Production capacity per day/week * Demand in the local market * How difficult it is to find customers * Main competitors ...

I have point-cloud scans of an existing facility and need complete Scan-to-BIM modeling in Revit. The scope covers: • HVAC, plumbing, and electrical systems • Architectural elements required for proper coordination I’m looking for Revit models delivered at LOD 300 for the general layout and LOD 350 where component detail and accurate fabrication data are essential. All geometry must align accurately with the scan, follow standard MEP families, and be organized with clear naming, worksets, and systems. Please include in your proposal: 1. A brief outline of your Scan-to-BIM workflow. 2. Examples of past Revit projects at LOD 300/350. 3. Estimated turnaround time for the first draft and final coordinated model. I will provide the registered point cloud and any available as...

I have point-cloud scans of an existing facility and need complete Scan-to-BIM modeling in Revit. The scope covers: • HVAC, plumbing, and electrical systems • Architectural elements required for proper coordination I’m looking for Revit models delivered at LOD 300 for the general layout and LOD 350 where component detail and accurate fabrication data are essential. All geometry must align accurately with the scan, follow standard MEP families, and be organized with clear naming, worksets, and systems. Please include in your proposal: 1. A brief outline of your Scan-to-BIM workflow. 2. Examples of past Revit projects at LOD 300/350. 3. Estimated turnaround time for the first draft and final coordinated model. I will provide the registered point cloud and any available as...

I’m looking for someone in Africa (any country) to research the roof tile manufacturing business and provide real, on-the-ground information. I prefer someone who can directly contact business owners, factory operators, or craftsmen and gather first-hand insights. Examples of the type of businesses I’m interested in: * Very small-scale/manual production (home or workshop based), like: Automated or semi-automated factory style The goal is to understand whether this business could be profitable and scalable in Africa. I need detailed information such as: * Typical startup costs (machines, materials, workspace, labor, etc.) * Profit margins and average selling prices * Production capacity per day/week * Demand in the local market * How difficult it is to find customers * M...

I have point-cloud scans of an existing facility and need complete Scan-to-BIM modeling in Revit. The scope covers: • HVAC, plumbing, and electrical systems • Architectural elements required for proper coordination I’m looking for Revit models delivered at LOD 300 for the general layout and LOD 350 where component detail and accurate fabrication data are essential. All geometry must align accurately with the scan, follow standard MEP families, and be organized with clear naming, worksets, and systems. Please include in your proposal: 1. A brief outline of your Scan-to-BIM workflow. 2. Examples of past Revit projects at LOD 300/350. 3. Estimated turnaround time for the first draft and final coordinated model. I will provide the registered point cloud and any available as...

Looking to re-engineer and upgrade aluminium blinds to enhance their durability, safety and functionality of 42 units with approximately 150 blinds in a community in Port D'Andtrax Key requirements include: - Improving durability, specifically by reinforcing frame strength, particularly the joint area's - Enhancing functionality of the automated operation. Ideal skills and experience: - Expertise in working with aluminium and mechanical systems. - Experience in automation technology for windows. - Strong problem-solving skills to ensure durability and functionality. Looking forward to your bids.

Preciso de um engenheiro civil devidamente habilitado que possa, de forma rápida e objetiva, emitir o documento IMPIC. ir comigo presencialmente na agência IMPIC no Porto - Portugal empresa de metalomecânica, voltada a obras públicas. Classe 2 - Categorias 1,4 e 5. Trata-se de uma tarefa simples, mas de precisão e agilidade.