Write plastic card vbnet jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    5,905 write plastic card vbnet jobs found, pricing in GBP
    Trophy icon Sticker label for a Plastic Container 23 hours left

    I need a label for a container the will be applied to the plastic bottle. I have some initial concept images

    £46 (Avg Bid)
    Urgent Guaranteed
    £46
    0 entries

    I need content pages for a couple plastic/cosmetic surgery websites. The first project is 300 words on "Dermaplaning". There will be a lot more content needed if the quality on this project is good. Ideally US based, I have had bad luck with content so far. Article: Dermaplaning Location: Seattle, WA

    £44 (Avg Bid)
    £44 Avg Bid
    36 bids

    ...distributing to restaurants. I will need to design a label for certain food products. Products will be in jars, glass bottles, we will have certain products vacuum packed and in plastic. These labels will contain what the product is, the ingredients, and nutritional Fact of that product. We will have all labels with our Company logo. Thank you Kind regards

    £618 (Avg Bid)
    £618 Avg Bid
    31 bids
    Trophy icon Picture at the main web page 12 hours left

    Hi We need to design a main picture on our web page with illustrating of differ...YB2?usp=sharing . files [login to view URL] this is the web site with picture on the first page that is cool for us (but we deal with: - doy packs - three side sealed bags - plastic films - boxes I have attached - our logo with colors - the mockup of our main page

    £133 (Avg Bid)
    Urgent Guaranteed
    £133
    29 entries

    We are looking at developing a new type of notebook which will have cover made of Plastic (Poly). The plastic cover can have variety of effects and designs to make the book stand out. Binding type will be center pinned. NOT SPIRAL. So the design has to be carefully chosen.

    £61 (Avg Bid)
    £61 Avg Bid
    8 bids

    ...sell 3 factories since i finish the college. The first one was a factory of plastic film, the second one a auto rubber parts factory and now i have a factory od Tungsten Wire. Talking to many of my friends of the time of plastic factory i realized that the demand for plastic parts with low demand is growing since our economy crashed in 2015. Trying

    £859 (Avg Bid)
    £859 Avg Bid
    19 bids

    I have a 3D design for a switch plate that needs to be to convert suitable for plastic injection moulding. NOTE: The 3 ribs are not a part of the design, there were just supports for 3D printing (need to be deleted) Actions: 1. All the walls need to be 2.5mm thick. 2. All the surfaces in the back (marked red in the image) need to be in the same

    £31 (Avg Bid)
    £31 Avg Bid
    34 bids

    create 2 illustraion , reproduce my product , one in metal plastic and one in sughero

    £15 (Avg Bid)
    £15 Avg Bid
    1 bids
    £4 / hr Avg Bid
    5 bids

    Article desired for a blog site for Cosmetic/Plastic surgery centre in Punjab, India.

    £10 (Avg Bid)
    £10 Avg Bid
    16 bids

    I need mechanical engineers can work in Vietnam who have 7-10 years experiences to join in a research and development project. Almost required 3D design skill, tooling, molding, die process understanding and follow up until mass production stable with zero defect. Prefer vietnamese pepole who graduate from Hanoi Univeristy of Sience and Technology.

    £824 (Avg Bid)
    £824 Avg Bid
    21 bids

    Our company Purepicnic, sells environmentally friendly compostable bioplastic forks,...displays the following facts and statistics. "Every year 140 million tons of trash are dumped into the ocean, and most of it is plastic." "Our compostable cutlery only takes 4 months to biodegrade while regular plastic takes 1000 years to completely break down" "

    £39 (Avg Bid)
    £39
    4 entries
    Trophy icon Brand logo 1 day left

    ...enough for a wide variety of products. Maybe we will produce vegetables in the future. Take into consideration that the brand logo will be printed out in cardboard boxes, plastic packaging and others. We think incorporating the Tukan bird into the logo can be a good idea. Attached I’m putting some ideas of how an animal can become a symbol of a brand

    £116 (Avg Bid)
    £116
    72 entries

    Trying to get a price on some plastic injection molds. I have a small machine I will be doing these on myself. The cheaper the better right now, will eventually get some stronger ones made. Just need some molds so I can get a start on what I'm doing. The pictures are molds I will be wanting done. Will probably be another 2 or 3 more. If this is something

    £115 (Avg Bid)
    £115 Avg Bid
    7 bids

    ...the work of so many talented people all over the globe ! The concept is mini crepes (pancakes) and I would like a logo for my business which will be printed on plastic plates, plastic cups, napkins, tshirt etc. I like vivid colours and I also like pastel colours (please do not use the colour red) I want a logo that “sticks” on a persons mind

    £24 (Avg Bid)
    £24 Avg Bid
    41 bids

    ...price for one is 1$. If the user wants he can update the items or delete them. Then when a grocery store customer come and the user registerd his orders like 2 apples one plastic bag etc. He will press finish button that will show a bill on the screen with the orders and total price. I want a simple app not very professional. Last thing when a user

    £131 (Avg Bid)
    £131 Avg Bid
    12 bids

    Looking for someome who can create and print plastic ID cards. Thanks

    £17 (Avg Bid)
    £17 Avg Bid
    24 bids

    ...to get quotes on a square glass bottle 150ml in size. I have the logo and everything I am just wanting somebody to get me quotes on a square bottle with a black plastic cap and a plastic pourer insert. Also I need black shrink capsules. I am looking at about 5000 bottles to start with. Also I am looking for the best filling solution for my product

    £773 (Avg Bid)
    £773 Avg Bid
    19 bids

    Looking...as well as optional extra sauces and protein rubs! Require design of logo, to then be put onto posters as well as freezer safe stickers which will be attached to the food plastic/cardboard packaging consisting of a tick menu as above but to include the name. Posters will vary in size as well as potential for business cards, double sided.

    £23 / hr (Avg Bid)
    £23 / hr Avg Bid
    23 bids

    Meet these criterias: (JPG of the design will be sent to you once you are awarded) "Please note the 3D mould design sheet should be in IGES or SETP format. The mould design sheet should be appear all details specification of this model, such as thickness,model size(length,width,height),structure....etc...."

    £114 (Avg Bid)
    £114 Avg Bid
    59 bids

    I need a good quality, realistic looking 3D product, from my drawings. I’ll also need a cost efficient prototype made. (All plastic/rubber materials)

    £103 (Avg Bid)
    £103 Avg Bid
    9 bids

    Background: We all know paper straws are much better for the environment than plastic, and that the oceans are in a lot of trouble as more and more plastic pollution endangers sensitive ecosystems, including for humans. EcoTensil has an amazing paper solution to plastic utensils ([login to view URL]), we just need to let more of the world the world know about

    £458 (Avg Bid)
    £458 Avg Bid
    27 bids

    I have a fesign of a plastic toy that I want to manufacture. I neef help to make the first prototype. I need ideas and help to get it finnish. The plastick toy is big, ca.40cm x 40cm x 50cm. It need to be made by many parts and the kids will asamble it and play with it. Need a proffesional manufacture of plastic toys.

    £22 / hr (Avg Bid)
    £22 / hr Avg Bid
    21 bids

    Hi, I have a high resolution image of a board game with plastic stacking rings in different colors. Seven of these rings have the wrong color, which needs to be changed to the same color of some other rings in the same picture. I do not want the rings themselves to change by copy pasting others on top, please bid only if you are able to change the colors

    £15 (Avg Bid)
    £15 Avg Bid
    52 bids

    Looking for someone to create animations to be used as support for explanations of cosmetic surgery ...explanations of cosmetic surgery terms, processes, etc. Anatomical, but accessible (ie. not too scientific, but not too goofy, either). A friendly, simple look that will help a plastic surgeon explain procedures to patients and prospective clients.

    £671 (Avg Bid)
    £671 Avg Bid
    32 bids

    Need a driver to help move items 1.5mi away. No furniture or heavy boxes, only 4 plastic storage bins, small laundry basket, big duffle type bag, a small box & a couple odds & ends. Everything will be outside when you arrive. You don't even need to help load/unload unless you want to.

    £8 - £23
    Local
    £8 - £23
    0 bids

    ...interieor living room set comes along with plastic ceiling to match the hidden Jewel for FREE when purchase the P Ramlee Crystal Upright Grand Piano We have made it possible own a piece of arts in your newly renovated living room with low interest with AEON Credit or perhaps a ZERO interest on Credit card payment. In additional we give absolutely

    £69 (Avg Bid)
    £69 Avg Bid
    7 bids

    I have a picture of a box that I would like to look complete and perfessional. Please if you can make the whole box red and vertical plastic strength lines stick out. The writing white on the box with the same font as shown.

    £16 (Avg Bid)
    £16
    15 entries

    We are looking to make a 3D animation of paste coming from a nozzle and filling a plastic tube. Shape of the nozzle and the tube attached. Please note that the same are just for reference. We need the animation to be converted to GIF animation of 8 frames per second. We have few other work that will be assigned to the selected freelancer.

    £52 (Avg Bid)
    £52 Avg Bid
    15 bids

    I need some graphic design. we’re looking for a designer to come up with a wide range of designs that will be displayed across a 4” piece of plastic

    £84 (Avg Bid)
    £84 Avg Bid
    25 bids

    ...of them. Three colors combinations and three different view to each of them so total 9 different photo. Trim Materials : Leather pattern ABS matte plastic. Instrument Panel : Flat pattern ABS plastic. Floor Mat : Matte Black Rubber Color Combination 1 : Darker : Ral 7015 , Lighter : Ral7037 , Instrument Panel: Ral 9006 (Metallic) Color Combination

    £142 (Avg Bid)
    £142 Avg Bid
    28 bids

    Company Name: Arpan Films Pvt. Ltd. This company is a manufacturer of plastic films. We need a suitable logo.

    £12 (Avg Bid)
    £12 Avg Bid
    53 bids

    would like to know if you have relevant information for item 1, 2, 3 and 4. For the...only Reference file for item 3 is the excel file bimodal market sizes 4) For report type I need, it would be similar to the below link for HDPE of country of malaysia and plastic trend [login to view URL]

    £92 (Avg Bid)
    £92 Avg Bid
    13 bids

    Hi, We're looking forward building a small benchtop injection molding machine for small runs of plastic parts. We want a mechanical engineer to take that project requirements and deliver 3D models and manufacturing drawings for us. He should also do whatever analysis to make sure everything will work fine. He'll also instruct during the build of the

    £2512 (Avg Bid)
    £2512 Avg Bid
    23 bids

    I need 10 vector icons designed. I've included a list of the icons I need and brief instructions in parentheses below...Skeleton) • Hand (Top View of Hand Skeleton) • Shoulder (Shoulder Muscle / Skeleton) • Hip (Hip in attached image) • Laparoscopy (Abdomen) • Arthroscopy (Knee in attached image) • Plastic Surgery (Knife in attached Image)

    £20 (Avg Bid)
    £20 Avg Bid
    27 bids

    Hello, we have noticed your profile and think you could do the work. We have design...data logger. The data logger enclosure is a standard junction box that we have machined. Now that the tests are giving satisfactory results, we want to move on to a new PLASTIC ENCLOSURE. And would therefore be keen to know if you could design our new enclosure.

    £89 (Avg Bid)
    £89 Avg Bid
    1 bids

    ...produuct is to make re-usable straws (out of metal) for the Swedish (and hopefully later European) market. The reasoning behind making re-usable straws is to stop dumping plastic in the ocean. If you are unsure to as what a re-usable straw looks like or what it is, you should be able to find it on Google images We want, as previously mentioned, a

    £22 (Avg Bid)
    £22 Avg Bid
    37 bids

    I would like the 4 attached 3D models to be 3D printed in black plastic. The models are nameplates to be attached to a door, and so a simple low-cost prototyping plastic such as SLS nylon will be suitable - these objects will not be required to take any load.

    £121 (Avg Bid)
    £121 Avg Bid
    17 bids

    ...vTWQG9W-L1EcGsFFy7vQFcmmir3q_4Bt5g_ljo9QxoCG4sQAvD_BwE What we want you to quote (Just quote what you can do): 1. Design of the hardware 2. Separate cost for mold for the plastic box. 3. Separate cost for box CAD design 4. Separate cost for Working Prototype 5. Gerber files for production of PCB 6. Complete BOM, all commercial parts 7. Firm ware 8.

    £2914 (Avg Bid)
    £2914 Avg Bid
    21 bids

    ...design a 16x16 grid (sample grid 16x8 attached - Pic as well as gcode file) for us so that the same can be used in CNC machine or laser cutting machine to make grid from Plastic sheets. Details of the design are mentioned below : Grid : 16x16 , Dimension : 170x170x6 mm Each square : 10 mm x 10 mm X 6mm (9.2 mm internal, 0.8 mm wall). Top and Side

    £13 (Avg Bid)
    £13 Avg Bid
    14 bids

    ...valves within these. Pro and cons of each type over the other. -Research valve and valve body material and their pros/cons and corrosion resistance (Brass, stainless steel, plastic). *Fluid Viscosity/flow : -Research the relationship between the viscosity and flow of a subject. And the effect of temperature on both. -Research the causes and the effects

    £120 (Avg Bid)
    £120 Avg Bid
    12 bids

    ...[login to view URL] 440 [login to view URL] 24 [login to view URL] 23 [login to view URL] 85 [login to view URL] 34 [login to view URL] 176 [login to view URL] 108 [login to view URL] 226 [login to view URL] 284 Total

    £64 (Avg Bid)
    £64 Avg Bid
    1 bids

    ...[login to view URL] 440 [login to view URL] 25 [login to view URL] 23 [login to view URL] 85 [login to view URL] 30 [login to view URL] 176 [login to view URL] 108 [login to view URL] 226 [login to view URL] 284 Total

    £56 (Avg Bid)
    £56 Avg Bid
    1 bids

    Need someone to create solidworks model for a case we already have so we can go to an alternative supplier.

    £89 (Avg Bid)
    £89 Avg Bid
    129 bids

    the art work design is for a sticker on a plastic bottle measurement of 2"Height x 13"Long. Contents will be provided

    £19 (Avg Bid)
    £19 Avg Bid
    10 bids

    We require images for use in product advertising, marketing and websites- We prefer a free lancer who has designed images like the ones we have attached. If the images are chosen we will be glad to work more with the selected free lancer.

    £75 (Avg Bid)
    £75 Avg Bid
    42 bids

    Looking for a mechanical engineer to render production-ready files for a 3d hinged plastic case to specific specs and design, by upgrading an existing product (shown) to one that is superior in design and functionality. Full concept ready. Medium-advanced engineering problem-solving required for dual-use hinge connection points. Mild artistic 3d modeling

    £111 (Avg Bid)
    £111 Avg Bid
    50 bids

    I need to design a package of 500gms and 1kg plastic cover for spices packing

    £56 (Avg Bid)
    £56 Avg Bid
    19 bids

    I need a logo designed. Name Started from K latter of plastic Industries.

    £11 (Avg Bid)
    £11 Avg Bid
    38 bids

    I'm looking for industrializzation/ manifacturer who estimates the production costs of an object made of a plastic case, a cap, an electronic part. It mean a series production costs, mold costs,

    £19 (Avg Bid)
    £19 Avg Bid
    11 bids