Slice designer circuit design jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    16,614 slice designer circuit design jobs found, pricing in GBP

    Hi, I am looking for a Engine & Motor Synchronizing Controller. Please find attached Diagram for better idea.... THE MAIN CONCEPT OF APPLICATION: 1- Engine's RPM will be detected by a Non-Contact RPM detector. This RPM information will be given to the Controller. 2- Controller will run the Motor on same RPM as received/detected from of Engine. Reference Line: [login to view URL] 3- Th...

    £956 (Avg Bid)
    £956 Avg Bid
    1 bids
    Design project 6 days left

    logo design. Drivethru store - creative Donuts & NY style pizza by the slice, & street tacos. Business name “Deranged - Donuts/Pizza/Tacos.”

    £34 (Avg Bid)
    £34 Avg Bid
    14 bids

    I need an electronic-expert, who can create a circuit and build a prototype of the following device: It should contain a small display. On the display, I wanna show a number from 1-999. I wanna set the number on the device (with simple switch or similiar). The device must be connected with a computer with USB. On the computer, I have a software where

    £1074 (Avg Bid)
    £1074 Avg Bid
    10 bids

    ...currently looking to recruit more staffs with the following positions: Electronics Design PCB Design Layout Engineer Job requirements: • Graduated from Electronic Industry. • Understand the process from design to product board. • Experience the design of serial high speed circuit board. • Understand layout board processes such as stackup,...

    £29 / hr (Avg Bid)
    £29 / hr Avg Bid
    5 bids

    Design 3 products as I will provide the enclosure and the freelancer must provide the PCB complete design to fit within it and also firmware with a little webserver. The product is an I/O wireless based on LoraWan module, with external antenna communicating in Modbus. 1) It will have two relay outputs and two optoinputs, as well as a watchdog timer

    £995 (Avg Bid)
    £995 Avg Bid
    10 bids

    DRV8313 circuit board. Need Gerber files and revised Schematic and board for manufacture.

    £107 (Avg Bid)
    £107 Avg Bid
    1 bids

    ...currently looking to recruit more staffs with the following positions: Electronics Design PCB Design Layout Engineer Job requirements: • Graduated from Electronic Industry. • Understand the process from design to product board. • Experience the design of serial high speed circuit board. • Understand layout board processes such as stackup,...

    £9 / hr (Avg Bid)
    £9 / hr Avg Bid
    31 bids

    ...requirements, design and develop applications and test suites. • Research new technology, new method and be a pioneer in embedded software. • Develop and execute unit, functional, and integration tests. • Document design, design changes and updates. WORK REQUIREMENTS / What You Are Good At: • Work experience: 1 - 5 years • Experience in software

    £10 / hr (Avg Bid)
    £10 / hr Avg Bid
    13 bids

    ...Blackboard that has all inputs and outputs in place. Your calculator should be implemented within the subcircuit, 8-Bit Calculator. Please do not make any changes to the existing circuit, main. You may add as many subcircuits to the project as you would like. Logisim considers all .circ files as libraries so the simplest way to add your controller from part

    £144 (Avg Bid)
    £144 Avg Bid
    10 bids
    Lithium charger 5 days left

    I need a small circuit board designed to charge a pair of 18650 cells and proform switching. Please contact for more details.

    £252 (Avg Bid)
    £252 Avg Bid
    21 bids

    I have a circuit that isn't working as it should. This circuit should convert a sin wave to a square wave, then the frequency of the signal should be divided by 10 using the HC4059. The signal looks very nice all the way until the HC4059. After that IC, the signal looks terrible from varying frequency. I need to know why this is happening and how

    £58 (Avg Bid)
    £58 Avg Bid
    15 bids

    ...rest. First let me describe the purpose of this circuit. I will be using an ipad to take photos of people automatically. The app I uses plays a beep noise through the 3.5mm headphone jack the other end of the cable is connected to the circuit board where the microphone is currently located. The circuit would hear this beep and turn on a relay switch

    £128 (Avg Bid)
    £128 Avg Bid
    22 bids
    Remote Control Toy car ciruit 4 days left
    VERIFIED

    I want someone to build a 4 CH Remote Control toy car circuit. The circuit will limit damage on rc car wheels and most be transportable.

    £416 (Avg Bid)
    £416 Avg Bid
    17 bids

    I creat a golf tournements campany. The name will be: Circuit 19 There is some images i like I would like something modern and simple I dont need any golf item on the logo. Also, I will like to have some logo with a big C (without the name circuit)

    £59 (Avg Bid)
    £59
    41 entries
    Slice Image 3 days left

    Slice a flat image into a layered PSD/PDF. We need someone to slice every section in this venue map into its own layer, then deliver it in layered PSD/PDF format. If you do a good job there will be a lot more of these to do.

    £41 (Avg Bid)
    £41 Avg Bid
    28 bids

    Need help with a project of an electronic circuit

    £67 (Avg Bid)
    £67 Avg Bid
    27 bids
    multidruino -- 2 3 days left

    a circuit and a pcb design for the project

    £95 (Avg Bid)
    £95 Avg Bid
    2 bids

    Please do chat me and I explain everything

    £8 / hr (Avg Bid)
    £8 / hr Avg Bid
    33 bids

    Hi, do you have experience with openhab? do you have experience with home automation? are you able to draw a circuit plan - how to communicates devices? if yes then i need you for consulting 2h + drawing a circuit plan...

    £29 (Avg Bid)
    £29 Avg Bid
    1 bids

    ...verbiage to say; Get* a £100 Ritual Gift Card 4) Please update the colors used for the verbiage of the brand and value to be coherent with the image and creative. You have design freedom here, use your own skillset. 5) Make the "new" flag and the button be of the same color 6) Be sure the image of the product and the “new” flag don’t overlap each

    £19 (Avg Bid)
    £19 Avg Bid
    1 bids

    We have a power electronics circuit ready. The task will be to design the PCB layout which we will send for fabrication and the electronic component soldering will be done by us. The prototype should run after fabrication for the project to be considered successfully completed.

    £83 (Avg Bid)
    NDA
    £83 Avg Bid
    24 bids
    Electronic design 2 days left
    VERIFIED

    We require the services of an electronics engineer to design circuit board,electronics and system to use on our new range of furniture

    £361 (Avg Bid)
    £361 Avg Bid
    44 bids

    ...states of the device, these will drive various outputs (esc, motors etc) I have attached a [login to view URL] image showing the circuit layout. I may also add: - SD Card Reader (logs etc) - Laser diode - battery monitoring circuit so please estimate for this. I would like the work to be done via chrome remote desktop to a chrome OS computer connected

    £566 (Avg Bid)
    £566 Avg Bid
    21 bids

    I want the schematic and also the corresponding pcb of this circuit design with all the needed (Gerber) files.( You must only use the free version of KiCad software, use of another software design package is not acceptable ! ). I will provide you with a design from scratch ( by hand - pdf file ). I believe it will be an easy job for someone who knows

    £54 (Avg Bid)
    £54 Avg Bid
    4 bids
    Multidruino 1 day left

    Making a circuit and pcb design

    £8 / hr (Avg Bid)
    £8 / hr Avg Bid
    16 bids

    Hi Sharmin A., I would like to purchase your design that has a brain on the left and a circuit on the right.

    £31 (Avg Bid)
    £31 Avg Bid
    1 bids

    Fitness based app to cast to tv screens with multi video displays, interval timer and back end programme/Fitness circuit builder!

    £251 (Avg Bid)
    £251 Avg Bid
    6 bids

    ...soldered onto the development board. 3. Revision of the power supply - the current development board draws more energy than we would like. Lipo-rechargeable battery. 4. PCB design/updated. Deliverables: - full schematic - full PCB files according to measurements - Bill of materials - Instructions/info on PCB development...

    £31 / hr (Avg Bid)
    £31 / hr Avg Bid
    60 bids

    I just require a circuit diagram for an arduino project that I have. I also require the code to be double checked.

    £12 (Avg Bid)
    £12 Avg Bid
    14 bids

    I need a full Arduino program and circuit design including specific parts required to control heating of 6 pieces of Nitinol wire using pulse width modulation. Requirements: 1. I need a full circuit design 2. List of parts available in Australia that I should buy in order to build the circuit 3. Arduino program to control the heating of the wire

    £94 (Avg Bid)
    £94 Avg Bid
    37 bids

    Hi, We are looking for a pcb designer who should have good knowledge on mixed signal pcb designing, analog circuit designing and multi layer pcb designing. Submit your proposal with your previous experience. Details of the project will be shared to the concerned freelancer who got selected.

    £17 / hr (Avg Bid)
    £17 / hr Avg Bid
    34 bids

    I need to get data from 4 to 20 ma sensors and process input data using a microcontroller. After processing the data, it will be transferred to the computer via the Rs-232 protocol.

    £117 (Avg Bid)
    £117 Avg Bid
    24 bids

    We need Fritzing diagram for 12 simple circuits. The circuits are simple and I will give all the details which has to be designed using Fritzing software w...are simple and I will give all the details which has to be designed using Fritzing software will all the parts and clearly labeled. There are 11 simple circuits and 1 final circuit combining all.

    £15 (Avg Bid)
    £15 Avg Bid
    1 bids

    I am looking for an experienced individual or team that wi...looking for an experienced individual or team that will create an initial design and functioning prototype for a custom electronics project involving wifi communications, cameras and motion detection. Strong experience with consumer quality production of electronics and design is preferred.

    £422 (Avg Bid)
    £422 Avg Bid
    25 bids

    ...Operations, Modifications and Maintenance of telecommunications equipment and associated apparatus. (IP, Voice, EoSDH, MPLS, etc.) • Testing, commissioning and fault isolation of circuit orders for IPLC, EoSDH, voice circuits, IP circuits etc. (including the last mile offnet segments) • Implementation of new projects based on EPLAN, statement of work and provide

    £41280 (Avg Bid)
    £41280 Avg Bid
    4 bids

    This project must be ...then be used to replace auto-generated HTML found in app.component.ts. It is expected that new custom chart will still have ability to hover over legend to highlight chart slice as shown in demo links provided above. Finished product is expected to be ZIP file of angular project WITHOUT the auto generated node_modules folder.

    £131 (Avg Bid)
    £131 Avg Bid
    6 bids

    ...verbiage to say; Get* a Super Nintendo Classic 4) Please update the colors used for the verbiage of the brand and value to be coherent with the image and creative. You have design freedom here, use your own skillset. 5) Make the "new" flag and the button be of the same color Email 1) Open the Email PSD template. Replace the images in three places:

    £19 (Avg Bid)
    £19 Avg Bid
    1 bids

    ...regenerative energy from the electric motor during freewheeling, to charge back the battery. I want this to be semi-automated and hence I'm looking for a MOSFET/IGBT based switching circuit to achieve the same. Below is the scenario and problem statement. Check the diagrams for reference What I have: 1. 1000W E-bike controller with throttle 2. 48V Lead Acid battery

    £115 (Avg Bid)
    £115 Avg Bid
    6 bids

    Hi, We are looking for a freelancer who can develop firmware for ESP32 board, circuit for power supply and controlling the 16X16 led lights (WS2812B). Also we need Android App for controlling the led lights like sending customize or fixed images, text using BLUETOOTH. The freelancer has to provide the specification of the battery on which this board

    £304 (Avg Bid)
    £304 Avg Bid
    11 bids
    Trophy icon Create an Animation 1 day left

    ...other name from email list)! I’m just a tomato, but I know how hard it can be to vet the right candidates for your business. Just the other day some idiot tried to slice me into pico de gallo when I CLEARLY belong in a gazpacho or spicy marinara. Amateurs… Red Tomatoes isn’t a typical staffing firm. We’re into a more ORGANIC approach

    £80 (Avg Bid)
    Guaranteed
    £80
    8 entries

    I have a simple device that I will need to control and monitor from from a PC via its USB port. This device will have an I/O port (one for for 8-bit input and one for 8-bit output ). Also, apart from the I/O, I will need a few additional lines to work as CONTROL lines. The interface circuitry could be built using an ARM Cortex micro-controller, or use an available standard USB interface chips. In...

    £144 (Avg Bid)
    £144 Avg Bid
    33 bids

    ...Phantom 4 – see attached image (DJI Phantom) 4) Please update the colors used for the verbiage of the brand and value to be coherent with the image and creative. You have design freedom here, use your own skillset. Email 1) Open the Email PSD template. Replace the images in three places: the promo gift card, the texture/pattern behind the headline

    £31 (Avg Bid)
    £31 Avg Bid
    5 bids

    ...this calculation in Excel. Also the website URL. The Excel file contains a design equation allowing the output voltage adjustment for a DC/DC converter based on varying an input voltage making the DC/DC converter dynamically programmable.I have simulated (LTSPICE) the circuit with the values obtained from the Excel spreadsheet and it works as advertised

    £137 (Avg Bid)
    £137 Avg Bid
    25 bids

    ...3amp ultra fast smartphone charger design with following technical specifications and features: Technical specifications and features: • output voltage: 3.6V to 12V and the maximum output current: 3A or slightly greater than that like 3.1 or 3.4 amp and this power should be 18W (Not cheaper and conventional design like output 5V/3A, or 15W power, easily

    £1777 (Avg Bid)
    £1777 Avg Bid
    9 bids

    ...what to really do to make it work. Since Wolfram Alpha program is on Android and Windows and can also be used from their website. So I guess I would just need to rip out the circuit board in the calculator and install an Audrino Nano in it. Then I would need to code it so that the Audrino would boot up in the Wolfram Alpha program or code it in web-based

    £168 (Avg Bid)
    £168 Avg Bid
    4 bids

    ...OV7670, STM32 microprocessor, Battery charging module, Bluetooth AT-09. We only have circuit diagrams for individual components but we need Gerber file to place online order for final board. You will have to do: 1. Review components we require on the board and draw a circuit with applicable components, resistors, capacitors, etc 2. Make suggestions and improvements

    £164 (Avg Bid)
    £164 Avg Bid
    26 bids

    ...is a power supply & battery charging circuit design. Fabrication of the module is not required. Subject to the specifications below, required for delivery is: - circuit board BOM (incl manufacturer part numbers) - design files (preferably EasyEDA, but Kicad, Eagle or Altium OK) - detailed description of circuit operation Specifications: - usb-c in

    £298 (Avg Bid)
    £298 Avg Bid
    22 bids

    A network card with 12 ports, 10 ports are good and 2 ports are bad.

    £306 (Avg Bid)
    £306 Avg Bid
    1 bids

    My project is to use an arduino circuit like ATMEGA328P Pro Mini 328 Mini and a SIM 800L gprs GSM circuit board, prefered board to be smallest possible or ( if you can recommend better module for this project is fine let me know) conected to a the main alarm control panel and whenever there is an alarm this module call and send a text massage to the

    £2 / hr (Avg Bid)
    £2 / hr Avg Bid
    2 bids

    Hello, I want te redesign circuit to test self interference cancellation on 28 Ghz with different Bandwidth 5 mhz and 10mhz and 20 mhz to check the amount of self interference can be cancelled. Why I choose 28 Ghz because at this will be the frequency for 5G . Self interference cancellation has many techniques one of them is antenna cancellation So

    £50 (Avg Bid)
    £50 Avg Bid
    2 bids