Simple drawings mechanical cad jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    15,659 simple drawings mechanical cad jobs found, pricing in GBP
    Mechanical engineer 6 days left
    VERIFIED

    Mechanical engineer experienced in aircraft parts

    £106 (Avg Bid)
    £106 Avg Bid
    21 bids

    Hi I ...project, the cad file for the unit available with measurements, I have a ready drawing for the furniture, separation, partition, and measurements, I want you to put these drawings into the unit cad file, so its like using my hand drawing into the unit file so I can use it with contractors and service providers its urgent and very simple job.

    £93 (Avg Bid)
    £93 Avg Bid
    16 bids

    I have 3d models created in Iron Cad and i need to have each model converted to orthographic drawing.

    £31 / hr (Avg Bid)
    £31 / hr Avg Bid
    54 bids
    Mechanical based project 1 6 days left
    VERIFIED

    The overall gearbox design should include, load calculations, gear design, shaft design, fastener sizing, bearing selection (and any accompanying components such as seals and clips, etc.) and the design of any other fixtures, housing(s) and/or couplings to ensure a completely operating gearbox. Fastener calculations are required to justify the size of any main structural bolts used in the design. ...

    £269 (Avg Bid)
    £269 Avg Bid
    26 bids

    The overall gearbox design should include, load calculations, gear design, shaft design, fastener sizing, bearing selection (and any accompanying components such as seals and clips, etc.) and the design of any other fixtures, housing(s) and/or couplings to ensure a completely operating gearbox. Fastener calculations are required to justify the size of any main structural bolts used in the design. ...

    £119 (Avg Bid)
    £119 Avg Bid
    8 bids

    need a candidate who can work full/part time for our project. needs to have knowledge of catwalk, autocad for mechanical field

    £20 (Avg Bid)
    £20 Avg Bid
    14 bids

    convert pool room to autocad drawings

    £21 (Avg Bid)
    £21 Avg Bid
    33 bids

    I'm looking for an experienced and competent individual to produce a Building Regulations Package for a single storey rear extension. Attached are the drawings already done, also available in DWG.

    £365 (Avg Bid)
    £365 Avg Bid
    18 bids

    Need a database of companies: Geographic scope: Germany, Austria, Denmark, Netherlands, Belgium. Industries: - local manufacturers of sprockets, - local manufacturers of bearings, - local manufacturers of transmission systems (gearboxes), - local manufacturers of drivetrains (clutches, axles, differentials). (no global corporations) Data needed: Company name 100% Address 100% Postal code 100% Ci...

    £86 (Avg Bid)
    £86 Avg Bid
    9 bids

    Need drawing in digital format. Example file attached.

    £15 (Avg Bid)
    £15 Avg Bid
    33 bids
    £6 / hr Avg Bid
    31 bids

    I have several drawings which need to be converted into checksheets for production. The scope of work is shown below; - Open the provided drawing which contains inspection points. - Take the numbers at each inspection points into prepared excel template (for example, 10 +0.02/-0.05). - Capture the picture with the inspection point and save in the predefined

    £39 / hr (Avg Bid)
    £39 / hr Avg Bid
    35 bids

    Need a number of diagrams for an online learning platform. Subject material to be covered is maths and non-verbal reasoning (age 11-14).

    £4 / hr (Avg Bid)
    £4 / hr Avg Bid
    7 bids

    Woodern figures and furniture drawings will be prepared. Example download file pls.

    £38 / hr (Avg Bid)
    £38 / hr Avg Bid
    8 bids

    Hi, I have a project related to finite element analsys(Mechanical engineering) it includes the usage of softwares Ansys, Matlab aur also the manual calculations. Let me k ow if you are interested

    £89 (Avg Bid)
    £89 Avg Bid
    9 bids

    I need six drawings for a book that will feature the drawing in reference to some testing material. Each drawing should be progressively more complex. First set of two drawings will be a basic male and female - front facing, nude, no real identifying marks other than basic loop or loops for sexual organs. This would be something like a child might

    £38 (Avg Bid)
    Guaranteed
    £38 Avg Bid
    4 entries
    Drawings for VN game (2) 5 days left
    VERIFIED

    The project consist in: Making approximately 60 2D drawings for Visual Novel game. Between images, landscapes and characters. The description of the images can be found in the .xlms file at the address below, as well as some sketches and references. (Please check link before applying for the position.) [login to view URL]

    £743 (Avg Bid)
    £743 Avg Bid
    21 bids

    ...technical drawings into 3D models that are optimised for 3D printing. At this point in time, I need 3 parts to be modelled in 3D. These are: 1. Frame of the truck 2. Front Suspension Cylinder 3. Rear Suspension Cylinder The Suspension Cylinders will be mirrored for left and right. I will supply the winning bidder with the technical drawings of the parts

    £221 (Avg Bid)
    £221 Avg Bid
    51 bids
    CAD Development 4 days left
    VERIFIED

    I want a utility that will calculate for me the quantities of individual tiles I need to create any particular mosaic path pattern. Please see attached Specification and Flow Chart.

    £1216 (Avg Bid)
    £1216 Avg Bid
    9 bids

    Looking for somebody who can design me a wire construction like in the attached pictures shown. The technical drawing has to be with all necessary dimensions for the manufacturer. The glasses have the dimensions D10*H17CM.

    £24 (Avg Bid)
    £24 Avg Bid
    70 bids

    convert gym room to autocad drawings

    £26 (Avg Bid)
    £26 Avg Bid
    12 bids

    I need 2 drawings updated to include changes that were made in the actual construction phase. I have the original AutoCad versions and a pdf version of the proposed changes. Please quote for 2 drawings

    £199 (Avg Bid)
    £199 Avg Bid
    70 bids

    Looking for Mechanical Engineer to calculate pressure and structural parameters (material and wall thickness) of small, high temperature pressurized capsule to conduct evaporation experiments of Aluminum, Beryllium and Lithium Fluoride. Goal of the experiments is to maximize mass of evaporated material and minimize mass of the capsule. Use of ANSYS

    £75 (Avg Bid)
    Guaranteed
    £75 Avg Bid
    2 entries

    Performs some cyclic mechanical tests (that requires labour and patience) of a medtech company. About 4 main tests; estimate about a month’s work.

    £435 (Avg Bid)
    Local
    £435 Avg Bid
    1 bids

    convert seating room basement to autocad drawings

    £17 (Avg Bid)
    £17 Avg Bid
    10 bids

    Hello, I am interested in developing a product. What is needed from me in order for you to make a CAD design I can send to a manufacturer? I am looking to make a product similar to a listing on amazon. Could I send you a picture with dimensions? Thank you!

    £293 (Avg Bid)
    £293 Avg Bid
    88 bids

    Documentation for sheetmetal design, production ready quality. Our weldment assemblies can be up to 50 parts.

    £112 (Avg Bid)
    £112 Avg Bid
    60 bids

    We are developing a product. We need to build prototype. Need assistance with mechanical design and drawing using Solidworks. We are located in Cincinnati.

    £300 (Avg Bid)
    £300 Avg Bid
    90 bids

    I have some drawings for a Quonset Hut in a PDF. The company is sending the metal and I need to have a room added inside. Walls added to the ends. 3 doors and a window added. and the company has modified the side of the building to include an opening with a covering over it. They did not include that in the drawings. There are 2 ways of pouring the

    £342 (Avg Bid)
    £342 Avg Bid
    31 bids

    I have three degrees in English and I am about to self-publish a small bo...am about to self-publish a small book (only 7,196 words) of stories from the Canterbury Tales, translated by me into colloquial modern English. I need 7 or 8 simple but expressive line drawings, e.g. one of a cockerel, one of a fox, one of a medieval couple dancing together...

    £142 (Avg Bid)
    £142 Avg Bid
    52 bids

    I require a CAD model of a 18cm depth windsurfing board fin. It will be a copy of my own design 22cm fin, but diminished in size, such that its length is now 18cm. I have provided the STEP files from the 22cm design. The 18 cm fin foil section is the same design as the 22cm fin, but is proportionally smaller in all dimensions. The foil section of the

    £77 (Avg Bid)
    £77 Avg Bid
    45 bids

    Hello, I am looking for an Interior Designer with experience in 3D drawings and renderings to provide 3D drawings of a power track product integrated within 3 environments: 1. Living Room 2. Kitchen 3. Study Room I am willing to pay for each drawing provided and price will depend on our negotiation and it will be for each drawing.

    £571 (Avg Bid)
    £571 Avg Bid
    27 bids

    I am looking for someone who can handle a task related to the sector of mechanical engineering

    £322 (Avg Bid)
    £322 Avg Bid
    62 bids

    Looking for Mechanical Engineer to calculate pressure and structural parameters (material and wall thickness) of small, high temperature pressurized capsule to conduct evaporation experiments of Aluminum, Beryllium and Lithium Fluoride. Goal of the experiments is to maximize mass of evaporated material and minimize mass of the capsule. Please check

    £110 (Avg Bid)
    £110 Avg Bid
    21 bids

    I have concept drawings of my project but I am in need of detailed patent drawings for a simple products. The parts of the drawings must be numbered. This job must be completed by Thursday, May 24th.

    £20 (Avg Bid)
    £20 Avg Bid
    33 bids

    I have a number of drawings that need to have the templates changed to my company template. Company template is Pure Controls.

    £109 (Avg Bid)
    £109 Avg Bid
    32 bids

    Architectural building project, 4 levels, consider the structure and architectural drawings. Must follow the drawings but not too much fine detail on the finishes. Show mostly structure (each slab, walls and steelwork) and facade. Required to be done in 4 days from now 26 May 2018, no later. The modelling needs to accurately follow the building lines

    £280 (Avg Bid)
    £280 Avg Bid
    33 bids

    Need someone very familiar with drafting floor plans, elevation and creating drawing similar to surveys. will have an assistant work with you with all drawings and will need you to create them to scale. Must be very good at communication in English and open to revision as the building inspection department can be picky in my area. Attached is the

    £320 (Avg Bid)
    £320 Avg Bid
    104 bids

    ...page [login to view URL] Here you can see the pictures that I already have, and what style of drawing that I will need. We are of course talking about the many drawings that I have under each category. Now I only have drawing on the main categories on my page. But If you go further into a category for an example "Lys", where the picture

    £65 (Avg Bid)
    £65 Avg Bid
    29 bids

    I am trying to create an infographic but I need some pictures converted into drawings in Adobe Illustrator. I need these in vector format. There are 4 drawings required in total. Need this done ASAP.

    £51 (Avg Bid)
    £51 Avg Bid
    68 bids

    I need someone to make a CAD design sent in PDF form to me and CAD form to my fabricator with sizes, spacing etc noted on the drawing. It will involve taking a design off of a picture or a modified picture with notated changes.

    £23 (Avg Bid)
    £23 Avg Bid
    50 bids

    We need a 10-20 seconds of mechanical character animation for a 1-2 minutes commercial video for a new home appliances company. The final result should look like one of the shown videos down below. [login to view URL] [login to view URL] You will be responsible for creating the model along with rigging

    £5308 (Avg Bid)
    £5308 Avg Bid
    38 bids

    Require two CAD files drawn for plastic moulds with spherical holes incorporated. Small dimensions used (<=30mm). Permanent snap lock mechanism required to fit pieces together. I have basic drawings to show you.

    £94 (Avg Bid)
    £94 Avg Bid
    54 bids

    need someone for autocad drawings and 3dsmax renders of hospital departments. need the person to draw HVAC, mechanical, plumbing, civil drawings and render 3D images in 3dsmax.

    £145 (Avg Bid)
    £145 Avg Bid
    35 bids

    Hi there, I'm looking for someone to draw me some cartoon vector versions of plants. After all the plants are drawn I will arrange them into a background composition. Please see pic and the list below. #1-8 = you will emulate something like these, but don't copy. #9-13 please simplify photos and make cartoon plants. #14 = surprise me with your own plant! Emulate these Cartoon Plants: ...

    £110 (Avg Bid)
    £110 Avg Bid
    69 bids

    We have full AutoCAD drawings for a high quality house that other clients have seen and like. I have sketched the alterations that they want on a print and need these changes made to the original plan drawings so that we have a new set for the revised design. I then need the elevation drawings (4No.) altering to suit. The original planning drawig

    £388 (Avg Bid)
    £388 Avg Bid
    113 bids
    Modify Drawings 2 days left
    VERIFIED

    Modify some 3D CAD drawings. Based upon previous instrument case project

    £134 (Avg Bid)
    £134 Avg Bid
    105 bids

    Please include "I have read this descripti...start of any bid. I have 11 architectural drawings - See attached the floor plans - The other 6 will be elevations both before and after extension. I need them re-drawn into CAD. Nothing very complex here. My budget is £10 in total. I expect unlimited amends but do not expect many as it is so simple.

    £17 (Avg Bid)
    £17 Avg Bid
    65 bids

    I have a sketch on watch but I need to make a prototype. To do so, I have to create technical drawings and pass them to the factory for manufactuing. I am looking for someone who has prior experience in watch industry.

    £34 (Avg Bid)
    £34 Avg Bid
    32 bids