Pic project web app control ethernet jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    5,311 pic project web app control ethernet jobs found, pricing in GBP

    This project consists in build a stand Alone Arduino Mega2560 + Ethernet module in one PCB. Ethernet module Wiznet 5200. This PCB need LEDs to indicate power supply and power supply input is 24VCC. And need a USB interface similar to Arduino mega 2560. This project is a similar a ARDUINO MEGA2560+EthernetShield REV3 but components diposed in only

    £251 (Avg Bid)
    £251 Avg Bid
    7 bids

    You will use (Arduino UNO + Ethernet Shield + RFID Module + Display + Warning Speaker) to develop a attendance device. Student will show their RFID card in front of RFID Module and your device will read that and send the card value to a certain url. You will send the value as a GET method I will receive it from my php code by GET method then I will

    £107 (Avg Bid)
    £107 Avg Bid
    19 bids

    ...developers team working on it), building API's interfacing with our applications server, building drivers and other exciting Lora programming. First job is to create Gateway control utilities which will Update GATEWAY Software Start/Stop Radio Reboot the GATEWAY Update radio configuration file and other, like utilities. Gateways will be Tektelic,

    £9 / hr (Avg Bid)
    £9 / hr Avg Bid
    1 bids

    ...developers team working on it), building API's interfacing with our applications server, building drivers and other exciting Lora programming. First job is to create Gateway control utilities which will Update GATEWAY Software Start/Stop Radio Reboot the GATEWAY Update radio configuration file and other, like utilities. Gateways will be Tektelic,

    £14 / hr (Avg Bid)
    £14 / hr Avg Bid
    3 bids

    I want to split this one picture I've uploaded into 9 equal separate pictures. I will upload an example and I will upload the pic I want done

    £14 (Avg Bid)
    £14 Avg Bid
    11 bids

    I need to write a VHDL code for transfer data from 2 zedboard using ethernet without using a zynq-processor

    £157 (Avg Bid)
    £157 Avg Bid
    11 bids

    ...Systems Mandatory: All network devices must be hardwired and the router must support VPN pass-through. IP address must begin with 192. Computer/laptop must use a built-in Ethernet card. Not Permitted: More than one network card. Internet Speed Mandatory: High Speed Cable or DSL internet service. Not Permitted: Wireless or Satellite ISPs Green (NEED

    £5 / hr (Avg Bid)
    £5 / hr Avg Bid
    2 bids

    ...activities in and around the Amp or Repeater Hut as needed. • Utilize company databases to complete all circuit orders, from DS0 up to 10G (or more as applicable) also including Ethernet type circuits, assigned to the station. • Ensure that MTTI goals are met or exceeded Knowledge and Skill requirements Candidate should have an entry level knowledge of

    £40980 (Avg Bid)
    £40980 Avg Bid
    3 bids

    I need a network of thermostats that send data over Power Line Communication to a router where it is then sent over Ethernet and stored on a server. I will need to have software to access and display the data in graph form. There are other components that I need that are not so detailed. I need consulting for the design and components to use for both

    £110 (Avg Bid)
    £110 Avg Bid
    7 bids

    ...programmed with the visual programming language XOD ([login to view URL]). At the moment there is no MQTT nodes library for XOD. Though the standard Arduino boards including well-known ethernet shield W5500 have been implemented as standalone libs already. Jobdescprition: - Implement PAHO MQTT Arduino library ([login to view URL]

    £96 (Avg Bid)
    £96 Avg Bid
    3 bids

    Dear i'm looking for someone who can provide a library port of the W5500 Ethernet chip from Wiznet to mikrobasic PIC32. several library in C are available, you can start from what you want. Libstock provide one, but i don't know if she's really stable. target : PIC32MX with at least 256KB Flash (prefered 32MX450F256H, but you can you others target

    £126 (Avg Bid)
    £126 Avg Bid
    3 bids

    Need nice background to my logo, fb profil and background pic

    £19 (Avg Bid)
    £19 Avg Bid
    39 bids

    ...large web page to a client. The example can be downloaded from: [login to view URL] The example simply echos characters back to the client application whereas I need to server web pages. You need to have experience with MikroC language and preferably have experience with this Ethernet controller

    £91 (Avg Bid)
    £91 Avg Bid
    6 bids

    Hello dear, want a rfid reader that read rfid card 13.56mzh and send to server using arduino uno and with the help of Ethernet shield. This is small work for you if you know about that. 1) you are able to set MAC Address and ip address this is not rocket science. we have everything you have to do on anydesk or team viewer or skype. don't worry

    £74 (Avg Bid)
    £74 Avg Bid
    17 bids

    ...com/adafruit-feather/feather-specification) - 4 Relay switches to turn off/on lights, alarm sounds, etc ([login to view URL]) - Ethernet port ([login to view URL]) - Grove i2c sensor port for future sensors, and area to screw down 20mmx20mm board ([login to view URL])

    £396 (Avg Bid)
    £396 Avg Bid
    4 bids

    Need remote control and remote HD video streaming over wifi from drone. Would like to use Arduino type microcontroller board and/or Single Board Computer to control drone motors and to capture HD video via mini-HDMI camera output and have a media server like VLC stream the hdmi input over Gigabit ethernet to wireless transceiver and finally to an 802

    £184 (Avg Bid)
    £184 Avg Bid
    18 bids

    I need an Android app. I would like it designed and built.

    £2218 (Avg Bid)
    £2218 Avg Bid
    8 bids

    pic to my site ?

    £14 / hr (Avg Bid)
    £14 / hr Avg Bid
    41 bids

    I need a picture photoshopped with an image slimmed with puppet warp without the background blurred. This image needs to be saved in at least 300 PPI.

    £39 (Avg Bid)
    £39 Avg Bid
    30 bids

    I need a logo designed and pic editing

    £2 / hr (Avg Bid)
    £2 / hr Avg Bid
    21 bids

    I want to design a Gateway with Wifi, ZigBee, Bluetooth, and Ethernet Interface and daemon programming.

    £28 / hr (Avg Bid)
    £28 / hr Avg Bid
    24 bids

    I require an LCD display library for text and graphics written in C for Microchip PIC microcontrollers using the XC8 compiler and MPLABX environment. This could be a port of the Arduino LCD library 'U8g2'. See ttps://[login to view URL] There are details on how to port to other microcontroller platforms. See [login to view URL]

    £167 (Avg Bid)
    £167 Avg Bid
    10 bids

    I have a phone line from my cable company, but need it to go through the Ethernet to extend out farther than a wired phone line.I have internet at one location with the cable modem and phone line but send it over a ubuquiti wireless connection about 1 mile that works great for internet, but not sure how to run the phone line to the remote location?

    £111 (Avg Bid)
    £111 Avg Bid
    9 bids

    I would like a board designed that can control 4 solid state relays, 120vac at 6-10 amps. It must be able to detect 4 ac inputs. It must be able to count on 4 pins 12-24vdc. With pin protection, ie opto, diode, and resister circuit. Also must have a 485 interface. The 120vac circuits should have switches to manually override logic.

    £376 (Avg Bid)
    £376 Avg Bid
    32 bids

    I would like a board designed that can control 4 solid state relays, 120vac at 6-10 amps. It must be able to detect 4 ac inputs. It must be able to count on 4 pins 12-24vdc. With pin protection, ie opto, diode, and resister circuit. Also must have a 485 interface. The 120vac circuits should have switches to manually override logic.

    £338 (Avg Bid)
    £338 Avg Bid
    18 bids

    Hi I'm after ...network node running Dockers containers running ubuntu operating system. I wish to install this software remotely to my hardware which will be connected to my router via Ethernet Programming languages include GO C+ etc Full open source code available at github Here: [login to view URL] Let me know your thoughts Brian

    £48 (Avg Bid)
    £48 Avg Bid
    2 bids

    Need logo cleaned up and formatted for AI. The bulldog head and the circle logo.

    £48 (Avg Bid)
    £48 Avg Bid
    58 bids

    modify Solar MPPT Charger pcb and pic micro. code remove pir sensor and its associate parts remove temp sensor and its parts remove LDR and use solar voltage to sense dusk remove some unnecessary parts to reduce cost add 2X16 lcd display to display voltage and charging status etc... provide modified and fully working schematic and pcb file provide

    £92 (Avg Bid)
    £92 Avg Bid
    8 bids

    ...sensors. I want to measure RPM. I am using Arduino Uno, [login to view URL] and USB serial cable. I would like in the second moment using something different from serial communication like ethernet or modbus. I attached the file that I started and I don't know how to add a block to inform the rpm and neither how to export in .txt file. Please help me if you can. Thanks

    £108 (Avg Bid)
    £108 Avg Bid
    22 bids

    program a simple controller device for controlling signalling lights using the 8-pin PIC component PIC12F675 and to simulate it using the PIC kit. More details in chat

    £15 (Avg Bid)
    £15 Avg Bid
    28 bids
    £62 Avg Bid
    11 bids

    ...Systems • Networking technologies in routing, switching, quality of service, the OSI model, and emerging MANET technologies • Knowledge of protocols such as RIP, OSPF, IP, Ethernet, and wireless communications • Open source networking technologies (network stack, open flow, etc) • Open source Linux development • Low-level drivers and hardware interfaces

    £868 (Avg Bid)
    £868 Avg Bid
    11 bids

    I need to develop multi platform app on Windows and Mac OS. We have three powerful software for the customization of products. The software allows user to discovered and configure devices connected to Ethernet. The objective of this is to develop a new software capable of detecting all product regardless of connection platform, enable user to configure

    £963 (Avg Bid)
    £963 Avg Bid
    15 bids

    i need 10 different pictures to be editted. It's pictures i want to use on my LinkedIn profile, email, etc. It needs to look a bit like the result picture i added (it's not me). I also added a picture from me as an example.

    £19 (Avg Bid)
    £19 Avg Bid
    31 bids

    ...Systems • Networking technologies in routing, switching, quality of service, the OSI model, and emerging MANET technologies • Knowledge of protocols such as RIP, OSPF, IP, Ethernet, and wireless communications • Open source networking technologies (network stack, open flow, etc) • Open source Linux development • Low-level drivers and hardware interfaces

    £25 / hr (Avg Bid)
    £25 / hr Avg Bid
    4 bids

    Must recognize from webcam. If Licence plate matches entered before, a Digi...Licence plate matches entered before, a Digital out must triggered. Licence plate numbers for comparison must be entered from Ethernet via Web interface (or another suggestion). Remove Licence plate number also must manage from web site. Please ask questions feel free. Thnx

    £411 (Avg Bid)
    £411 Avg Bid
    18 bids

    I need some help with internet marketing.

    £134 (Avg Bid)
    £134 Avg Bid
    1 bids

    I need a new website. I need you to design and build a landing page.

    £47 (Avg Bid)
    £47 Avg Bid
    6 bids

    Need pic to be edited with effective glorified tracing

    £3 / hr (Avg Bid)
    £3 / hr Avg Bid
    27 bids

    ...monitoring system in MODBUS RTU protocol & it communicates with DTU in wifi network. DTU PCB- It gets information from RTU & transmits the data to PC to which it is connected with ethernet cable. The data will be in same MODBUS RTU protocol during transmission. Also the DTU gets data/operating command from System & transmits to RTU for output ON/OFF. Repeaters

    £813 (Avg Bid)
    £813 Avg Bid
    14 bids

    Pic editing.....lr software...full hd pic....[login to view URL],cover pic

    £13 (Avg Bid)
    £13 Avg Bid
    5 bids

    i need to hire an artist to create a profile pic for my mixer channel. i am not looking for anything too particular. I like pineapples and synth wave. Thank you :)

    £21 (Avg Bid)
    £21 Avg Bid
    36 bids

    ...freelancer who will be able to complete my project of the house. The building is 2 floors with an underground floor. It is about 300m2 in total. What I require: - Full structural design for beam, slab, column, foundation and calculation report. - Mechanical, electrical, and plumbing full detail drawings including ethernet cables, cctv cables, outlet cables

    £412 (Avg Bid)
    £412 Avg Bid
    22 bids

    This proejct asks you to write a simplified implementation of RFC 8086 - GRE in UDP encapsulation called greu. The implementation will support multiplexing multiple IP or Ethernet tunnels over a single UDP socket

    £77 (Avg Bid)
    £77 Avg Bid
    9 bids

    I need someone who can set up a Raspberry Pi as a VPN server which has 5-10 3G mobile USB dongles attached, the Pi will be connected via ethernet and VPN users will connect via its local IP on the ethernet interface but each user will need to be routed via a different one of the 3G modems to the internet. Ideally, I'd like something I can add additional

    £197 (Avg Bid)
    £197 Avg Bid
    12 bids

    I need someone to design a logo, Facebook & YouTube cover pic for my channel. My channel name is EfficientAdvice. Its a technology based channel. I need it as soon as possible. Looking forward to you.

    £11 (Avg Bid)
    £11 Avg Bid
    16 bids

    ...electronic thermostat, i would like to control many things from one controller. I would like to save logs every 15 minutes for all inputs and outputs. I need the diagram where to connect all of that things. I'm open to suggestions to do with an other controller but i want parts list and cost. I would like to add Ethernet port if it is possible only for status

    £151 (Avg Bid)
    £151 Avg Bid
    9 bids

    Project details: Using information provided via the links below, create a software package that is able to drive multiple stepper motors to specific relative positions, based off data received over Artnet or E1.31. Additionally, create solution for allowing the Raspberry to communicate via RDM status, error messages, and address/universe information

    £810 (Avg Bid)
    Urgent NDA
    £810 Avg Bid
    10 bids

    ...requirements are mentioned as underneath: 1. Create 2 VM. 2. One VM act as active and other as Standby 3. Both VMs have dynamic IP addresses and host name. 4. Both VM have 6 Ethernet IP addresses and one of them as VIP. 5. Both server finally up (OS boot with application) with other servers IP addresses and host name. In other words, once we boot both

    £8 (Avg Bid)
    £8 Avg Bid
    1 bids

    ...nodes as I wish (or add more nodes over time), but only manage one disk image for software or configuration changes, etc. Each node is connected to the server Pi over a wired Ethernet connection through a switch. The server Pi gets its internet via Wi-Fi, and it shares internet access to each of the nodes. (I’ve done this before by installing DCHP router

    £987 (Avg Bid)
    £987 Avg Bid
    11 bids