Pcb soldering jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    16,682 pcb soldering jobs found, pricing in GBP
    Poster Design 6 days left

    I have a series of steps, looks like 15. I would like the textual steps to be transformed into a flow chart using somewhat humorous clip art or the like, along with captions where necessary. I would like the flow chart to be informative as well as humorous. Perhaps slightly on the snarky side. Let's just say for starters that the poster is about 24" x 24". Procedure is as follo...

    £74 (Avg Bid)
    £74 Avg Bid
    50 bids

    I need to change the chip from my simple PCB. New chip: whatever is available on the market. Tasks: change the code written in assembler to the new chip.

    £811 (Avg Bid)
    £811 Avg Bid
    20 bids

    I am offering work from home soldering contracts for people who can solder pcb to contacts and cable to pcb in order to create a cable hookup for our business. This takes roughly ten minutes to solder if you’re good, and I will pay $5 per cable connection completed. There is a potential for us requiring up to 150-200 of these items completed weekly on an ongoing basis so this could be an ide...

    £733 (Avg Bid)
    £733 Avg Bid
    6 bids
    smps design 6 days left
    VERIFIED

    design a non isolated two output [login to view URL] bom and pcb design needed.

    £120 (Avg Bid)
    £120 Avg Bid
    6 bids
    Pcb for a circuit design 5 days left
    VERIFIED

    I have a circuit design as a photo and I made it on Proteus but I have something wrong, I need someone to just correct my connections and do the PCB for the circuit My budget is 10-25$

    £18 (Avg Bid)
    £18 Avg Bid
    33 bids
    Pcb design 5 days left

    hi.i amlooking for pcb designer, contact me for details

    £57 (Avg Bid)
    £57 Avg Bid
    30 bids

    I want a pcb design and layout for a vape

    £69 (Avg Bid)
    £69 Avg Bid
    17 bids

    Executive Summary Soberity of a driver is one of the most significant requirement to avoid crashing and accident. There are 3 standard test used by police officer to detect whether a driver is “sober” enough to drive. One of them is the walking test (see [login to view URL]). We want to create a system to automate the walking test as part of soberity test according to the setup descri...

    £384 (Avg Bid)
    £384 Avg Bid
    9 bids

    I have 17 CAT 6 cables that need to be connected to each other The board Is a "dumb board" it should just interconnect the 17 cables ie 34 ports. The ports used should be available at JLCPCB!

    £16 (Avg Bid)
    £16 Avg Bid
    9 bids

    Need Female Trainers who can teach block coding on platform like edublocks,Mit app inventor,java processing, Python, electronics,pcb Design. Trainers who have experience in block coding and can give 2-3 hrs daily. Excellent communication is must.

    £4 - £7 / hr
    £4 - £7 / hr
    0 bids
    Altium PCB corrections 4 days left
    VERIFIED

    hi We need to make 4 foot print changes and 4 routing changes in a pcb. We can provide schematic file project file and pcb file for Altium.. I am attaching the video here.

    £64 (Avg Bid)
    £64 Avg Bid
    19 bids
    Grobotech Tag 4 days left

    We would like to build a PCB that can house Bluetooth, battery and OLED. This device is capable of displaying a QR code on the OLED. BLE is used to notify the person when the device is near. No RFID and e-ink display has been changed to oled. Here is the reference.: [login to view URL]

    £783 (Avg Bid)
    £783 Avg Bid
    17 bids

    We have a PCB that we have built for one of our products; we have the schematic with us in. sch extension, and we have a Gerber file for the same version. The outputs required for us are as follows: 1) Gerber file cross-referencing with schematic and changes to Gerber file if needed 2) Pick and place files 3) 3D views of PCB 4) Spice simulation 5) Signal integrity 6) Based on specs data sheet a...

    £1889 (Avg Bid)
    NDA
    £1889 Avg Bid
    11 bids
    £24 Avg Bid
    1 bids
    £289 Avg Bid
    30 bids

    Hi. I need a design for device which are controlled by simple phone app. Device requires PCB board, microcontroller and GPS module.

    £715 (Avg Bid)
    £715 Avg Bid
    49 bids

    Looking for a PCB designer for a contract gig and potentially long-term relationship. Must have Altium designer experience. Generate symbols, schematic capture, route traces, work with board houses, experience with RF and wearables (is a plus if you have this, but not necessary)

    £106 (Avg Bid)
    £106 Avg Bid
    36 bids

    I have a circuit of vehicle tracking device and you need to check our Arduino code and analyze the circuit for optimal use. Also the pcb design of it will be implemented. Expert in Altium is preferable.

    £67 (Avg Bid)
    £67 Avg Bid
    7 bids

    Hi Md Abu Sakib M., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I would like a pcb design and layout for a vape that utilises a 3000mah battery USB/C for fast charging

    £27 (Avg Bid)
    £27 Avg Bid
    1 bids

    Hi Md Abu Sakib M., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I would like a pcb design and layout for a vape that utilises a 3000mah battery USB/C for fast charging

    £27 (Avg Bid)
    £27 Avg Bid
    1 bids

    Hi, we are developing the 2nd generation of our indoor/outdoor sensor device, which contains a controller board. We're looking for someone to build the schematics and layouts for this board in Altium. We have a prototype board we made through Gumstix, but it needs some changes and we only have schematics for it at the module level, not for the whole board. We need the modules connected tog...

    £981 (Avg Bid)
    £981 Avg Bid
    33 bids

    You must live in certain countries in the Western Balkans, Eastern Europe, or Latin America. You do *not* need an ESP32. You do *not* need an Arduino. You must live in one of the following countries... Albania, Bosnia and Herzegovina, Brasil, Bulgaria, Chile, Colombia, Kosovo, Mexico, Moldova, Montenegro, North Macedonia, Romania, Serbia, or Uruguay. ✻ OVERVIEW ✻ I estimate that you will norma...

    £8 / hr (Avg Bid)
    £8 / hr Avg Bid
    16 bids

    Hello there! Ill attach a file with video/picture on how i want my product to be in a type of final stage. But what i need from you is to help me block car key signal which is 433.92MHz and 868MHZ in Europe when there is no movement. When there is movement i want it to not block the signal. For more info check attached video and picture what i have in mind. More questions i can answer in PM Thanks...

    £373 (Avg Bid)
    £373 Avg Bid
    23 bids

    Hi. I want to request a project to render 2 videos. 1. I want to add a 'PCB model' to my 'product part drawing model'. It is in STP file and I can change the type of the file if you request. images are there for to help you understand the product. 2. I want to render the model that looks like the video that I uploaded below. I want it to display like this: It starts as a...

    £141 (Avg Bid)
    £141 Avg Bid
    34 bids

    About the task: I am working on a device which will act as a mouse for people with repetitive strain injury. At the moment I am using a BNO055 sensor with a ESP32 development board to control the mouse cursor. You can find the project code here. The goal of this request is to improve the project in a couple of ways, then create the necessary CAD design files, and BOM to be able to manufacture ...

    £1466 (Avg Bid)
    £1466 Avg Bid
    12 bids

    Hi there, I am seeking help to build a device around ESP32WROOM to measure position and speed of a device that translates linearly. This device i seek to be compact and communicates to Android tablet via bluetooth. I wish to use as much off the shelf device with the correct accelerometer. Scope: Find correct off the shelf ESP32WROOM Design PCB to mount above with a charging circuit for a batt...

    £326 (Avg Bid)
    £326 Avg Bid
    21 bids

    im looking for a pcb to be made to control 10 LED's with a simple blink function it needs to be powered by a button battery Cr2032 and mounted in a surface mounted battery holder, the switch needs to be a low profile tactile momentary switch. everything needs to be SMD and the 10 LED pads should be so i can ether mount an LED direct to the pad or solder a wire where required, also i need a ...

    £10 (Avg Bid)
    £10 Avg Bid
    4 bids

    Hi, I want a PCB layout that logs power and sends data over bluetooth for 0-100v battery outputs.

    £139 (Avg Bid)
    £139 Avg Bid
    13 bids
    design an IOT SHELF 3 days left
    VERIFIED

    We are looking to hire one freelancer who can develop/porotype and IOT SHELF. This shelf will help users find where item is stored, when it was stored/added and who has borrowed/check out and item. respond by answering: 1. 4-1=x 2. what custom IOT devices and solutions have you built 3. do you know how to design pcb boards 4. do you know how to code/develop services that intergrade with IOT pla...

    £407 (Avg Bid)
    £407 Avg Bid
    13 bids

    Hello, We are looking for a freelancer to help design a PCB board which controls an LED array. The LED array is external and is not included in this project. We need the PCB schematic, layout, component selection and firmware. We will provide more detail and a basic flow diagram once a freelancer has been chosen and will work with you to help refine it. Once this project is done, there will be...

    £386 (Avg Bid)
    £386 Avg Bid
    47 bids

    We are developing an IoT device to be used to control a drip irrigation system through an Android app. We already have app developers working on the app, but we are seeking for professional PCB designer to work on the circuit board. We will be using NodeMCU V3 as the microcontroller and so this will be imbedded in the board. The allocation for sensors will need to be provided for using connector ...

    £18 / hr (Avg Bid)
    £18 / hr Avg Bid
    18 bids
    LoRaWan board 2 days left

    I need a small LoRaWan board integrating the following components / features. The goal is to get a cheap but reliable component : - WLR089 or WLR089U0 with its antenna connector (for EU868) - sensors of Temperature and Humidity (in the "classical" ranges) - sensor of C02 or eCO2 (VOC would be a plus) (CCS811 for instance) - JST 1.25 to connect an external battery - Wires to...

    £138 (Avg Bid)
    £138 Avg Bid
    7 bids

    We have a PCB for a product we are building and are currently purchasing the components for assembly of the board. However, there is one component, DRV8703QRHBTQ1, which we are unable to find as there is no stock for this component in the market. We need to find an alternative component that is available in stock that fulfills the following requirements with regard to DRV8703QRHBTQ1: 1) Footpri...

    £51 (Avg Bid)
    £51 Avg Bid
    5 bids

    Small factory 3D layout for current floor plan, create simple animation to shown pcb process floor in current layout ,work already done need someone specialist in the field of Electrical equipment expert in pcb to make the presentation and drawing more good

    £20 (Avg Bid)
    £20 Avg Bid
    6 bids

    Gerber RS-274X file needed and Excellon drill file for PCB etching - Cad files available to create these. Please advise which file type you would like. for photoresist film

    £83 (Avg Bid)
    £83 Avg Bid
    14 bids
    Soldering operator 1 day left
    VERIFIED

    I need a soldering operator for turnkey projects

    £15 - £124
    £15 - £124
    0 bids

    Switch board with touch control and wifi enabled

    £41 (Avg Bid)
    £41 Avg Bid
    12 bids
    MCPCB for Bitfury IC 1 day left
    VERIFIED

    I am looking for someone who can reverse engineer the Gerber files for the current Bitfury PCB...in order to shrink the package to work with our liquid cooling system.

    £334 (Avg Bid)
    £334 Avg Bid
    23 bids

    The request is to make an energy harvesting circuit with compatibly of power only through the RF [login to view URL] shown in the diagram, when microcontroller get powerup from ST25DV they need to read some information from some sensors ( for example temperature) and then transfer that info via the I2C network to the NFC transceiver and then that value is needed to be show...

    £487 (Avg Bid)
    £487 Avg Bid
    8 bids

    We are looking for s senior engineer to assist us with creating from scratch a PCB layout for a brand new project. The person will need to do the following: - Starting from a block diagram that we will give to you, you should create the circuit and PCB design based on the requirements and the goal of the project. - You should add also all pull-down resistors or capacitors that could be needed. -...

    £428 (Avg Bid)
    £428 Avg Bid
    13 bids
    Electronic Engineer 15 hours left

    In this project You will have to use drivers which will create a magnetic field in the pcb n help a magnet move and for that you need to know how to work with arduino as well. [login to view URL] (Something like this)

    £158 (Avg Bid)
    £158 Avg Bid
    10 bids
    BlueNRG-232 Board 10 hours left

    We want build a pcb with ST BlueNRG-232, use the mcu in it without other independent mcu, if you can , we will send you the details

    £263 (Avg Bid)
    £263 Avg Bid
    16 bids

    We are looking for s senior engineer to assist us with replacing a depreciated chipset that in no longer available. The person will need to do the following: *Update the circuit and PCB design based on the recommended replacement chipset. *Determine the proper replacement chip that works with the rest of the circuit board design. *Test to ensure the replacement chip and circuit design work within...

    £766 (Avg Bid)
    £766 Avg Bid
    30 bids

    We have a lot of designs with PDF format(schematic design). We need an experienced engineer who can design schematic & PCB layout based on the given design format. Preference given to freelancers with experience in Altium Designer

    £25 / hr (Avg Bid)
    NDA
    £25 / hr Avg Bid
    15 bids

    We need someone who can verify all components in schematic provided by us and can design a PCB for the same. We'll chat for further details.

    £112 (Avg Bid)
    £112 Avg Bid
    28 bids

    You do *not* need any experience at all. You must live in certain countries in the Western Balkans, Eastern Europe, or Latin America. You do *not* need an ESP32. You do *not* need an Arduino. You must live in one of the following countries... Albania, Bosnia and Herzegovina, Brasil, Bulgaria, Chile, Colombia, Kosovo, Mexico, Moldova, Montenegro, North Macedonia, Romania, Serbia, or Uruguay. ✻...

    £8 / hr (Avg Bid)
    £8 / hr Avg Bid
    18 bids

    circuit already designed. need it implemented in easy eda and pcb design to be made.

    £9 (Avg Bid)
    £9 Avg Bid
    13 bids

    must have experience in Hardware Design & development i.e Board design, prototyping, Component selection, board bring up,debugging and functional verification etc. must have experience with tools like Orcad, Altium & Allegro viewer for PCB Layout review

    £247 (Avg Bid)
    £247 Avg Bid
    20 bids