Keil uvision jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    594 keil uvision jobs found, pricing in GBP

    ...will involve utilizing the Keil compiler with STM Low Level Drivers (LL) to develop firmware for the IR transmitter. Please note that the project should not use the HAL driver. Responsibilities: - Implement the Phillips RECS80 protocol on the STM32F072 microcontroller. - Develop firmware using the Keil compiler and STM Low Level Drivers (LL). - Utilize the IRTIM peripheral on the STM device, with TIM17 for the carrier frequency and TIM16 for data transmission. - Interface the IR LED through an MMBF170 N-Channel FET on the GPIOB9 pin. Requirements: - Proficiency in embedded C programming. - Experience with STM32 microcontrollers, particularly the STM32F0 series. - Familiarity with the Phillips RECS80 protocol and the SAA3008 datasheet. - Expertise in using Keil com...

    £99 (Avg Bid)
    £99 Avg Bid
    12 bids

    Project for mspm0g3507 board platform; Keil uvision cmsis based Bare Metal Approach

    £52 (Avg Bid)
    £52 Avg Bid
    1 bids

    I am in need of an proficient Embedded C programmer who is familiar with the STM32 Discovery Board and Keil Microvision 4. Your task will include coding for multiple touch functionalities including: - Multitouch gestures - Single touch commands - Touchscreen keyboard implementation Furthermore, the touch functions should enable: - Scrolling and zooming - Swipe Gestures Knowledge of microcontroller registers is a must. This project requires complex yet precise command execution. Those who have firsthand experience working on similar projects will be given priority. Please share relevant work samples in your bid.

    £92 (Avg Bid)
    £92 Avg Bid
    5 bids

    Led1 to turn on Bulb 1 with response Led2 to turn on Blub 2 with response Need complete keil project file

    £12 (Avg Bid)
    £12 Avg Bid
    1 bids

    I am seeking expertise in creating a project that inv...card using a standard SPI module. The code should operate without using FreeRTOS system. Moreover, the developed code will need to be compatible with Keil 5, and all project files should be shared in addition to the project folder. Tasks to be Accomplished: Implement a module for writing and reading text data in CSV format on a MicroSD card. Ensure seamless integration with a hardware SPI controller. Deliver complete project folder to work with Keil 5. A hands-on experience with MicroSD operations, solid understanding of CSV file manipulation and a strong knowledge of SPI hardware controller is expected for this task. Familiarity with Keil software would be a plus. The final code must operate independently ...

    £12 (Avg Bid)
    £12 Avg Bid
    6 bids

    We're looking for a seasoned/experienced embedded engineer to fulfill the following tasks: - Code analysis of source code that operates an industrial coin sorter - Detailed documentation of the codebase to provide clear understanding and instructions for future development - Refactoring of the codebase to improve its structure and efficiency Source code is written in C (IDE: Keil C51). We will provide as much information as we have on hardware and PCB specification. Caveat: These are currently NOT well documented. Requirements: * Programming Languages - C * Expertise / familiarity with 8051 MCU, specifically Nuvoton Chipset. Ideal Skills and Experience: - Strong knowledge and experience in embedded C programming and the 8051 microcontroller - Expertise in code analysis and...

    £1871 (Avg Bid)
    £1871 Avg Bid
    12 bids

    it is a seven-segment display driver with serial interface. datasheet can be found at: the attached datasheets are for the same part just different part number. if anyone has experience working with the IC do contact me. i want to program for 8051 core in C (keil C). can provide the trial hardware for the same. Regards Rajan Dhrangadharia

    £61 (Avg Bid)
    £61 Avg Bid
    5 bids

    I am seeking a skilled individual with access to ChatGPT Turbo (128k) to perform AI-based code analysis and refactoring on 15 C files. The goal is to identify and address issues,...uses an 8051. Scope: While I estimate this to be a roughly 2-hour project, the actual time may vary based on code complexity. Please bid accordingly. Deliverable Submission: I can provide you with a shared Dropbox folder, or access to a private repository on Github, whichever you think is most appropriate. Experience and Preferences: Experience with the Keil C51 compiler is not required, but detailing the depth of your experience with Keil C51 will push you to the top of the list as we are currently considering some code enhancements. I look forward to reviewing your proposal. Best regards,...

    £20 / hr (Avg Bid)
    £20 / hr Avg Bid
    14 bids

    ...adaptation. Please read carefully below explanation and give your price. Dont waste our time if you dont have stm32 project experiences. 1- STM32 bluepill or blackpill will be used. 2- 8CH STM32's ADC Reading and sending via COM port to the computer and see values on our software. 3- ADC reading and data sending speed 50k samples for each channel. Total 400k sampling in a second. 4- All STM32 cube and Keil codes will be given and all codes have to have explanations. 5- We have a C# based Windows software. Now, our software can not get data over 5000 samples. Our software will be UPDATED. I will share our software's C# Sln file and explanation of the software. You can create new software or update ours. BUT WHEN THE JOB FINISH OUR SOFTWARE SHOULD BE WORK. 6- The proje...

    £171 (Avg Bid)
    £171 Avg Bid
    20 bids

    I am looking for a freelancer who is familiar with the STM32 F303RE microcontroller and bare metal programming, as I am in need of guidance for my project. Project Requirements: - Develop a program using Keil uVision in thumb2 mode - The program should read and display register values of the STM32 F303RE microcontroller - The displayed register values should be in hexadecimal format Ideal Skills and Experience: - Proficiency in bare metal programming for the STM32 F303RE microcontroller - Experience with Keil uVision and thumb2 mode - Strong understanding of register operations and display formatting in hexadecimal Please provide examples of previous projects or relevant experience in your proposal.

    £56 (Avg Bid)
    £56 Avg Bid
    8 bids

    I am looking for a freelancer who is experienced in Assembly programming language to work on software "Keil uversion4 MDK software,Arm processor

    £14 (Avg Bid)
    £14 Avg Bid
    5 bids

    We have a data logging software on windows C#, STM32 and our software adaptation Please read carefully below explanation and give your price. 1- STM32 bluepill or blackpill will be used. 2- 8CH STM32's ADC Reading and sending via COM port to the computer. 3- ADC reading and data sending speed 50k samples for each channel. Total 400k sampling in a second. 4- All STM32 cube and Keil codes will be given and all codes have to have explanations. 5- We have a C# based Windows software. Now, our software can not get data over 5000 samples. Our software will be UPDATED. I will share our software's C# Sln file and explanation of the software. You can create new software or update ours. BUT WHEN THE JOB FINISH OUR SOFTWARE SHOULD BE WORK. 6- The project can not be separated. Just...

    £174 (Avg Bid)
    £174 Avg Bid
    9 bids

    We have a Nrf52 project developed by eclipse, now we want to convert the project working under Keil IDE.

    £155 (Avg Bid)
    £155 Avg Bid
    3 bids

    Project requirements: 1. Creation fingerprint templates from source graphic images according to the ISO format ISO/IEC 19794-4:2011. Demo application works on x86 platform. 2. Fingerprint verification software (1:1) for ARM Cortex-M3 platform The source code of the developed algorithms must be executed on microcontrollers with the ARM Cortex-M3 architecture. Can be used Keil Simulator for developing. Experience in devepment of fingerprint recognition is required.

    £892 (Avg Bid)
    £892 Avg Bid
    17 bids

    Hello, With STM32f103 has micro USB, we refer this usb below. Stmcubemx and keil preffered. Needs: 1- We want to program stm with USB without change boot jumper. 2- we want to read analog channel and get values from USB (as COM Port). 3- we need analog sampling speed 50000 per second and per channel (8ch) 4- we need to get analog values as float array and array values seperated by (;) 5- we need array header value. 3xhex values will send as header of before array analog values. 6- we need code, and detailed pdf document for all settings. Codes should have information.

    £12 (Avg Bid)
    £12 Avg Bid
    11 bids

    Nordic nRF52 PDM Microphone Project I am seeking a software developer who can assist me in developing a Nordic nRF52 PDM microphone. The microphone should measure sound level in dB. Ideal Skills and Experience: - Proficiency in software development for Nordic nRF52 in KEIL with SDK by Nordic It is necessary to implement the code for the microcontroller in C . It is necessary to receive data from the MEMS microphone MMICT390200012 via the PDM interface. Microcontroller Nordic nRF52832. ARM KEIL development environment. The environment is already configured and there is a project. The official SDK from Nordic nRF5_SDK_17.1.0_ddde560 is used. All peripherals, UART for debugging are also configured. PCBA is factory produciton. Scheme in the attachment Algorithm: Set up the PD...

    £98 (Avg Bid)
    £98 Avg Bid
    13 bids

    I am looking for a Hyderabad based PCB L...manufacturing teams  Assist teams in preparing test procedures to verify PCB functions  Assist in component sourcing and use of the best components for the design. Function specific experience  Experience with AMS Design – Amplifiers, Xtals, Interfaces, Regulators etc.  PCB Layout of multi-layer boards – rigid, flex etc.  Board Bring-up & Testing  Tools – GIT, Kicad, Matlab, Freecad, LTSpice, Keil etc.  MCU Platforms – TI, STM, NXP, SiLabs, Nordic, Arduino, R-Pi etc.  Wireless Platforms – LoRa, Sub 1G, BLE/BLE5, BT, WiFi, LTE/LTE-M, 5G/4G/3G, GPRS/EDGE etc. If you are a PCB Layout Engineer with KiCad experience and are available to work on-site in Hyderabad, please apply with your relevant experie...

    £268 (Avg Bid)
    £268 Avg Bid
    4 bids

    We are disrupting the 2W/3W & off-road 4W mobility markets with Ridot-K, our Connected & Smart Android HMI: Infotainment, Instrument cluster, Full screen maps, ADAS and more. With Ather Energy, Ola Elec...manufacturing teams  Assist teams in preparing test procedures to verify PCB functions  Assist in component sourcing and use of the best components for the design. Function specific experience  Experience with AMS Design – Amplifiers, Xtals, Interfaces, Regulators etc.  PCB Layout of multi-layer boards – rigid, flex etc.  Board Bring-up & Testing  Tools – GIT, Kicad, Matlab, Freecad, LTSpice, Keil etc.  MCU Platforms – TI, STM, NXP, SiLabs, Nordic, Arduino, R-Pi etc.  Wireless Platforms – LoRa, Sub 1G, BLE/BLE5, BT, WiFi, LTE/LTE-M...

    £280 (Avg Bid)
    £280 Avg Bid
    6 bids

    Nordic nRF52 PDM Microphone Project I am seeking a software developer who can assist me in developing a Nordic nRF52 PDM microphone. The microphone should measure sound level in dB. Ideal Skills and Experience: - Proficiency in software development for Nordic nRF52 in KEIL with SDK by Nordic It is necessary to implement the code for the microcontroller in C . It is necessary to receive data from the MEMS microphone MMICT390200012 via the PDM interface. Microcontroller Nordic nRF52832. ARM KEIL development environment. The environment is already configured and there is a project. The official SDK from Nordic nRF5_SDK_17.1.0_ddde560 is used. All peripherals, UART for debugging are also configured. PCBA is factory produciton. Scheme in the attachment Algorithm: Set up the PD...

    £94 (Avg Bid)
    £94 Avg Bid
    13 bids

    The purpose of a game called GUESS is for the contestant to guess a number which has been pre-loaded into a machine. The contestant will enter his/her guess of the number and the machine will display 0x0F, if the entered number is below the ‘unknown’ number. If the entered number is above the ‘unknown’ number, 0xF0 is output and if the entered number is equal, 0xFF is output and the game ends. Write an Arm Assembly language program called GUESS to implement the above task. Assume that the number to be pre-loaded is between 0 and 255 and is stored in a byte variable called ‘unknown’.

    £29 (Avg Bid)
    £29 Avg Bid
    5 bids

    Keil Business Solutions GmbH is an innovative Google Reseller and IT Service Provider. For a client project we are looking for a Senior SAP FI-AA Consultant with S4/HANA experience (f/m/d) – remote & on site Spain Project plan: 1.5.23 – 16.6. 23 blueprint phase à budget approx. 8 days (2x2 day workshop at Granollers + 2-3 days writing blueprint) 1.7.23 - approx. 30.4.24 Project phase à Golive Spain approx. 1.3.24 / 1.4.24 à Budget results from the blueprint requirements but is estimated between 20 - 30 days (60% on site / 40% remote) from approx. 1.5.24 Subsequent on-site support for S/4 HANA approx. 1-2 days per month Skills: • Experience as a SAP FI-AA Consultant • Experience with S4/HANA • knowledge of the SAP FI local re...

    £247 (Avg Bid)
    £247 Avg Bid
    5 bids

    Write code in C, will compile with Keil. 1. Device boots into sleep mode. 2. RFID Reader is connected to SPI port. (CR95HF) 3. Card # is 4 bytes. 4. When card is scanned, you will receive card #. If no card # stored, this become default card #. Devices wakes up here. () 5. If card # is stored and matched, then open. blink LED green and sends pwm output else blink red. If match it will reset to no pin. 6. Read date & Time from RTC and store in transaction table along correct card # We using rgb led so they are basic port pin. Need to make high, wait 300 ms then low. Microcontroller : MS51EC0AE I2C used: 24LC512, 24C04 RFID Reader Used: CR95HF For MS51EC0AE rewrite the code: P1.0-spi clk, P0.0 – spi mosi, P0.1 – spi miso, P0.3 – interrupt for card scan, P0....

    £14 (Avg Bid)
    £14 Avg Bid
    1 bids

    Hi, i am using stm32f407 discovery kit and i connected w5500 ethernet module but the issue is it reply me with sip : and MAC: FF:FF:FF:FF . i used w5500 own code for stm32f4. please if anyone of you who worked on w5500 for stm32f407. kindly note i already tested w5500 module with esp32 arduino its ok , seems like issue is with keil mdk code( might be clock).

    £24 (Avg Bid)
    £24 Avg Bid
    2 bids

    I am looking for an experienced embedded C programmer to add features to an existing Project. The project includes developing micro features using an ARM Cortex microcontroller and utilizing the Keil uVision toolchain. This is a long-term project and I am looking for someone who can handle it within the allotted time frame. Tasks will be done in multiple micro projects. Experience in 3G/LTE modules and BLE will have added advantages.

    £107 (Avg Bid)
    £107 Avg Bid
    30 bids

    On the base of the EHD07 Mplab structured strategy we need to receive the same strategy for the EHD08 here enclosed for keil or equilvalent because the new MCU is ST and not Microchip.

    £98 (Avg Bid)
    £98 Avg Bid
    21 bids

    On the base of the EHD07 Mplab structured strategy we need to receive the same strategy for the EHD08 here enclosed for keil or equilvalent because the new MCU is ST and not Microchip.

    £105 (Avg Bid)
    £105 Avg Bid
    13 bids

    On the base of the EHD07 Mplab structured strategy we need to receive the same strategy for the EHD08 here enclosed for keil or equilvalent because the new MCU is ST and not Microchip.

    £74 (Avg Bid)
    £74 Avg Bid
    15 bids

    On the base of the EHD07 Mplab structured strategy we need to receive the same strategy for the EHD08 here enclosed for keil or equilvalent because the new MCU is ST and not Microchip.

    £113 (Avg Bid)
    £113 Avg Bid
    19 bids

    Strong skills on Embedded C/C++ · Should have knowledge in HMI based GUI development with various HD icons, sliders, graphs and drop down menus · Hands-on experience on various microcontrollers AVR/PIC/ARM/STM32F4/Xilinx XC7Z020 · IDE experiences on AVR Studio/ MPLAB/Keil IDE · Peripherals like - UART/SPI/I2C/ADC/PWM FPGA interfacing includes C Code for: ADC IC with SPI interface. DAC IC with SPI interface. 12 Bit Parallel Data interface with DAC IC. 8 Bit Parallel Data interface with DAC IC for sine wave generation. 10 PWM channel interface. SDRAM interface. SD Card Interface. USB interface RS232 Interface Current Steering DAC interface interaction experience on FPGA Able to prepare and implement the Pre-production...

    £576 (Avg Bid)
    £576 Avg Bid
    12 bids

    I have a Radar Sensor (IVS-947). Link: Datasheet: attached You need to write code for NUCLEO-F411RE board which will be connected with IVS947 radar sensor. The code should able to read number of moving objects within 80 meters, distance and their speed. The code can be developed in keil or STM32Cube. You should read the datasheet and write the connection between NUCLEO board and sensor. ** You must use Arm_CMSIS_DSP library for fast Fourier transformation which is the key for object detection. **It is needed to provide a simple GUI using matlab/python. Reference: attached

    £126 (Avg Bid)
    £126 Avg Bid
    13 bids

    Hi, How are you doing. I am looking for electrical engineers to work on multiple tasks in following areas: • Embedded C Programming. • VHDL/Verilog, LABView/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. I am looking for long term work relationship. New freelancers are warmly welcomed. Important Note: I need dedicated freelancers who strictly follow the deadline and give me good quality work without any plagiarism.

    £118 (Avg Bid)
    £118 Avg Bid
    42 bids

    Looking for a long-term firmware/embedded engineer. Familiar with low-level embedded code on a microcontroller in embedded C. Most of the work will be microproject tasks for the long term. Code needs to be compiled and can be tested on any platform. Need to have experience on FreeRTOS , compilers like KEIL/IAR, external modules 3G/LTE module and BLE.

    £38 (Avg Bid)
    £38 Avg Bid
    13 bids

    I have a completed embedded project using couple sensors and modules written on mcuxpresso ide which uses frdm-kl25z nxp board. I want to make the project work on keil uvision5 ide but I have problems regarding transitioning the libraries etc. The whole project code and schematics are available, I just need to convert the required libraries and some simple code conversions in order to make the same project work on keil uvision5 ide.

    £117 (Avg Bid)
    £117 Avg Bid
    7 bids

    I am looking for embedded guy who has worked with USB HID on STM32. My requirement is : The two STM32 devices are connected over USB line and communicating over HID class. Usually communication is uni-directional i.e device to host. But I am looking for bidirectional communication so that two STM32 devices can receive or transmit data with each other. Most prob...HID will be used. You can connect two STM32 discovery boards with USB over OTG cable to make the connection and one will act as device and other as host. I need an API routine which I can call to transmit and receive data on any side. For testing you can print the data on UART which received from HID and similarly, send the data from UART to HID. Make sure to use CubeMX for code generation and Keil IDE/Cube IDE for pro...

    £7 / hr (Avg Bid)
    £7 / hr Avg Bid
    3 bids

    Write a program to display to act as a 12 hour and 24 hour digital clock. The display should show HH-MM-SS. Where the dashes flash at 1HZ 50% duty cycle to indicate the seconds passing unless the time is being set then all the dashes are turned off. The final dot at the end of the display is used to indicate AM or PM. The input will be performed using the supplied numeric keypad. All the major subsystems used should be interrupt driven. The clock will be in either of 2 modes: Time Setting mode – where the Hours and Minutes are set using a potentiometer Alarm Setting mode - – where the Hours and Minutes are set using a potentiometer When the Alarm is set then the turn the RGB LED Yellow. When the Alarm goes off toggle between RED and BLUE and generate a 1KHz tone on the Piezo bu...

    £95 (Avg Bid)
    £95 Avg Bid
    8 bids

    Hand-on experience in STM32 MCU, Keil IDE, and BLDC motor controllers algorithms development along with basic knowledge of power electronics to understand what's happening in Harward to troubleshooting in real-time testing... My problem: As we developed a firmware 2W EV vehicle almost 90% satisfied all parameters except in the vehicle speed starting up to a 10kmph motor creating noises, jerking, and then after it runs smoothly... If you have any knowledge or solutions for these types of activities please let me know...

    £25 / hr (Avg Bid)
    £25 / hr Avg Bid
    7 bids

    Firmware development requirements: Hand-on experience in STM32 MCU, Keil IDE, and BLDC motor controllers algorithms development along with basic knowledge of power electronics to understand what's happening in Harward to troubleshooting in real-time testing... My problem: As we developed a firmware 2W EV vehicle almost 90% satisfied all parameters except in the vehicle speed starting up to a 10kmph motor creating noises, jerking, and then after it runs smoothly... If you have any knowledge or solutions for these types of activities please let me know...

    £1216 (Avg Bid)
    £1216 Avg Bid
    9 bids

    Hello, everyone. I am finding someone for stm32f415 firmware development. If can do this, you maybe use the keil or cubemx software. Hope to more discuss via chat. Thanks

    £46 / hr (Avg Bid)
    £46 / hr Avg Bid
    3 bids

    Embedded C System Software Engineer who will work with a team of embedded software engineers that can develop embedded software on ARM-based microcontrollers like STM32. We are looking for a professional Embedded C Program...and oscilloscopes. experience in Embedded C/C++. Experience with network programming and protocols (TCP, UDP, HTTP, SRTP, etc.). Experience in working up and working with hardware-focused communication interfaces (MIPI, SERDES, I2C, RS232, USB, Ethernet) Experience in working with HAL Firmware development experience on MO, M3, or M4 embedded cortex Development in embedded C/C++ in IAR, Mbed, or Keil Development Environments Thorough knowledge of Embedded System Architecture with RTOS. Prior experience in working in an embedded Linux or RTOS environment, ARM CP...

    £832 (Avg Bid)
    £832 Avg Bid
    23 bids

    I am looking for embedded guy who has worked with USB HID on STM32. My requirement is : The two STM32 devices are connected over USB line and communicating over HID class. Usually communication is uni-directional i.e device to host. But I am looking for bidirectional communication so that two STM32 devices can receive or transmit data with each other. Most proba...HID will be used. You can connect two STM32 discovery boards with USB over OTG cable to make the connection and one will act as device and other as host. I need a API routine which I can call to transmit and receive data on any side. For testing you can print the data on UART which received from HID and similarly, send the data from UART to HID. Make sure to use CubeMX for code generation and Keil IDE/Cube IDE for pro...

    £94 (Avg Bid)
    £94 Avg Bid
    6 bids

    Looking for a long term firmware/embedded engineer. Familiar with low level embedded code on microcontroller in embedded C. Most of the work will be microproject task for long term. Code needs to be compiled and can be tested on any platform. Familiar with FreeRTOS, Embedded compilers like KEIL/IAR, STMicrocontrollers will have added advantages.

    £113 (Avg Bid)
    £113 Avg Bid
    28 bids

    we look for someone that has experience on keil c programming for stm32f103 mcu and also on DLMS protocol. we want implement dlms server side on stm32f103 and RS485 serial(uart). the open source exist on and you can download it and implement it on stm32f103.

    £138 (Avg Bid)
    £138 Avg Bid
    10 bids

    I have a BLE device to test already. I need the firmware expert that have experience the NRF52 BLE SoC with Keil MDK. Please list your experiences in this fields, and Please don't forgot to write "Nordic" on heading of your BID. Thanks

    £1061 (Avg Bid)
    £1061 Avg Bid
    5 bids

    Goal: To send customized SMS using SIM7600G module (), controlled by LPC1768 (NXP ARM Cortex M3). Design Requirements: 1. I need complete hardware connection instruction 2. Code must be developed in C with detailed comments, and in Keil uVision5 platform. 3. The recipient's phone number and SMS text can be modified in the Keil Program 4. The SIM7600G and LPC1768 need to communicate through UART0 (P0.2 as TXD0 and P0.3 as RXD0) 5. When a button (you can define which pin is connected to a button) is pressed, a SMS text should be sent to the recipient's phone. 6. The code for commanding SIM7600G should be a separate C file added to the project. Additional Note: 1. The source files are the final deliverable. 2. Minor changes may be needed from

    £94 (Avg Bid)
    £94 Avg Bid
    4 bids

    We are looking for electrical and electronics engineers with good experience in following areas: • Embedded C Programming. • VHDL/Verilog, LabVIEW/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Feel free to place your bid and mention your areas of expertise in your proposal. we highly encourage new freelancers to apply for this post.

    £132 (Avg Bid)
    £132 Avg Bid
    22 bids

    I need someone that knows how to write the cod in keil Uvisin.

    £99 (Avg Bid)
    £99 Avg Bid
    1 bids
    stm32 Ended

    I need someone that knows how to write the cod in keil Uvisin.

    £99 (Avg Bid)
    £99 Avg Bid
    1 bids

    I need someone that knows how to write the cod in keil Uvisin.

    £476 (Avg Bid)
    £476 Avg Bid
    7 bids

    I have a STM32L051K8T6 project not developed by myself. It is a Keil project. The independent watchdog is not implemented in this project, but I want it to be included. So, I will provide the project to the freelancer, who then has to implement all the setup required to make it work. I need to have to have the updated project (still Keil) together with a description how to change the time-out value, how to start and stop the watchdog, and how to service it.

    £107 (Avg Bid)
    £107 Avg Bid
    8 bids