Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    2,225 fpga jobs found, pricing in GBP

    all projects related to FPGA EMULATION

    £30 / hr (Avg Bid)
    £30 / hr Avg Bid
    1 bids

    You are required to build a calculator: 1- it generates numbers (0-99) on the seven segment display using push buttons. The first 2 digits on the board should be the first number. The second 2 digits should be the second number. 2- using the slide switches you should add, subtract, multiply and divide these 2 numbers. Then display the answer on the fpga board. Write the source code and constrain...

    £11 (Avg Bid)
    £11 Avg Bid
    1 bids

    You are required to build a calculator: 1- it generates numbers (0-99) on the seven segment display using push buttons. The first 2 digits on the board should be the first number. The second 2 digits should be the second number. 2- using the slide switches you should add, subtract, multiply and divide these 2 numbers. Then display the answer on the fpga board. Write the source code and constrain...

    £59 (Avg Bid)
    £59 Avg Bid
    5 bids

    I have an Altera Terasic DE-10 Standard FPGA board and a TMP36 temperature sensor. The FPGA has a built in ADC and a 128x64 dot lcd. [login to view URL] [login to view URL]

    £37 (Avg Bid)
    £37 Avg Bid
    1 bids

    Hello Experts Looking for good digital electronics expert with knowledge of verilog, fpga , mips etc to work on small project today 9th dec. Apply only if you are available to help today Thanks

    £139 (Avg Bid)
    £139 Avg Bid
    1 bids

    Hello Experts Looking for good digital electronics expert with knowledge of verilog, fpga , mips etc to work on small project today 9th dec. Apply only if you are available to help today Thanks

    £18 (Avg Bid)
    £18 Avg Bid
    1 bids

    Hello There Need very good digital electronics based expert to help on small project today ie 9th Dec. If you are good with verilog, FPGA, MIPS etc then apply only. You ll be hired asap if you are sure you'll help today

    £75 (Avg Bid)
    £75 Avg Bid
    5 bids

    Hello There Need very good digital electronics based expert to help on small project tomorrow ie 9th Dec. If you are good with verilog, FPGA, MIPS etc then apply only. You ll be hired asap if you are available to start on 9th dec Thanks

    £105 (Avg Bid)
    £105 Avg Bid
    2 bids

    For this project the goal is to design and simulate a Blackjack game using Verilog/VHDL. It must be demonstrated using the Mimas Spartan 6 FPGA board. The inputs are taken from the player using the switches and push buttons while the output is displayed on the LCD display and LEDs.

    £118 (Avg Bid)
    £118 Avg Bid
    6 bids

    Hello Need very good digital electronics based expert to help on small project tomorrow ie 9th Dec. If you are good with verilog, FPGA, MIPS etc then apply only. You ll be hired asap if you are available to start on 9th dec Read Less

    £77 (Avg Bid)
    £77 Avg Bid
    5 bids

    Hello Need very good digital electronics based expert to help on small project tomorrow ie 9th Dec. If you are good with verilog, FPGA, MIPS etc then apply only. You ll be hired asap if you are available to start on 9th dec

    £65 (Avg Bid)
    £65 Avg Bid
    3 bids

    Hello Need very good digital electronics based expert to help on small project tomorrow ie 9th Dec. If you are good with verilog, FPGA, MIPS etc then apply only. You ll be hired asap if you are available to start on 9th dec

    £61 (Avg Bid)
    £61 Avg Bid
    3 bids

    I already have 7 segments running but i need help in modifying the code and adding the temperature sensor. Ready to pay 5000 rupees for this job.

    £73 (Avg Bid)
    £73 Avg Bid
    5 bids

    I wrote Code in verilog. Code is working. Need help to understand some technical details. . I'm looking for someone who has good experience in signal processing and FPGA.

    £27 (Avg Bid)
    £27 Avg Bid
    4 bids

    Grin 31 bitstream and miner fpga and I have a choose between to different ones. Need ur opinion on which one is better for a ROI

    £7 (Avg Bid)
    £7 Avg Bid
    1 bids

    Grin 31 bitstream and miner for the fpga. So I a choose between the Sqrl Forest kitten vu33p and Junglecat with dual vu9p which is going to have a better ROI ??

    £926 (Avg Bid)
    £926 Avg Bid
    1 bids

    I need a design implemented that utilizes the Altera Max 10 FPGA (document with pins attatched) as a decoder to have an Analog Potentiometer (A/P) control RGB LEDs (document attached). Ideally the potentiometer would control the brightness of one of the colors and be able to switch between red, green, or blue. This does not need to actually be programmed onto the board. The schematic, code, and te...

    £15 (Avg Bid)
    £15 Avg Bid
    2 bids

    Need a code on nexus 3 fpga board to turn on and off 2 leds using 2 switches.. Switches and leds are ilexternal not on board

    £19 (Avg Bid)
    £19 Avg Bid
    9 bids

    I need a design to be theoretically implemented that utilizes the Altera Max 10 FPGA (document with pins attatched) as a decoder to have an Analog Potentiometer control RGB LEDs (document attached). In addition, I need a rough description of what your inputs/outputs on your design are doing and how the decoder works. What you will provide (An example of your results is shown) - TOP Level Schemat...

    £89 (Avg Bid)
    £89 Avg Bid
    5 bids

    Hello, i want someone to design a device (frequency generator) that produces multiple accurate frequencies. This device will communicate with a smartphone app and a site you will develop. I need an expert in these fields, pcb design fpga programming, app mobile programming, website development and communication those 3. So the project includes 3 parts. 1. The device. 2. The mobile app. 3. The web...

    £1875 (Avg Bid)
    £1875 Avg Bid
    28 bids

    Hi Smith J., As discussed on "https://www.freelancer.com/projects/arduino/Embedded-system-FPGA-verilog-code-22644894/proposals", please start work

    £15 / hr (Avg Bid)
    £15 / hr Avg Bid
    1 bids

    Project: The project consists of multiple phases. It is to develop a waveform viewer (WV) that can send data to a PC for display. The data collection is done on the FPGA board. A microprocessor gets data from the FPGA board and sends data to the PC through either a Bluetooth modem or a USB port. The system supports three analog channels, with a single-level triggering. Only 8 bits of precision wil...

    £103 (Avg Bid)
    £103 Avg Bid
    5 bids

    Project: The project consists of multiple phases. It is to develop a waveform viewer (WV) that can send data to a PC for display. The data collection is done on the FPGA board. A microprocessor gets data from the FPGA board and sends data to the PC through either a Bluetooth modem or a USB port. The system supports three analog channels, with a single-level triggering. Only 8 bits of precision wil...

    £38 (Avg Bid)
    £38 Avg Bid
    4 bids

    " Blackjack" game Design on Basys 3 FPGA board

    £29 (Avg Bid)
    £29 Avg Bid
    3 bids

    UV exposing FPGA Programmer. Printing machine logic along with DMD logic programing.

    £1146 (Avg Bid)
    £1146 Avg Bid
    7 bids

    Hi, I have put together a project for Zynq Zedboard and am not very experienced with FPGA/Vivado. My problem currently is I have many warning on synthesis and removal of some registers so I need some help with issues I am having. The custom IP is a frequency counter with an AXI4 Full bus to the PS as well as an AXI Lite from the PS for configuration. I'm hoping to get to the stage of reading ...

    £10 / hr (Avg Bid)
    £10 / hr Avg Bid
    6 bids

    Hi There Need good expert with knowledge of Verilog, xilinx and fpga. its about displaying result of calculation of basic calculator on lcd . apply asap if you are sure you'll complete everything correctly and urgently R

    £83 (Avg Bid)
    £83 Avg Bid
    9 bids

    Project: The project consists of multiple phases. It is to develop a waveform viewer (WV) that can send data to a PC for display. The data collection is done on the FPGA board. A microprocessor gets data from the FPGA board and sends data to the PC through either a Bluetooth modem or a USB port. The system supports three analog channels, with a single-level triggering. Only 8 bits of precisio...

    £50 (Avg Bid)
    £50 Avg Bid
    5 bids

    Hi There Need good expert with knowledge of Verilog, xilinx and fpga. its about displaying result of calculation of basic calculator on lcd . apply asap if you are sure you'll complete everything correctly and urgently

    £137 (Avg Bid)
    £137 Avg Bid
    1 bids

    Looking for assistance in verilog HDL for design of SRAM and HDMI controller. Specifically, designing verilog code to take incoming data, put the data into a FIFO SRAM, pass the data through an RGB encoder, then to an HDMI encoder, and finally out to an HDMI screen. Alternatively, would like to achieve the same system using pipelining to synchronize clocks of the input and output using a shallow B...

    £16 / hr (Avg Bid)
    £16 / hr Avg Bid
    9 bids

    Looking for assistance in verilog HDL for design of SRAM and HDMI controller. Specifically, designing verilog code to take incoming data, put the data into a FIFO SRAM, pass the data through an RGB encoder, then to an HDMI encoder, and finally out to an HDMI screen. Alternatively, would like to achieve the same system using pipelining to synchronize clocks of the input and output using a shallow B...

    £17 / hr (Avg Bid)
    £17 / hr Avg Bid
    10 bids

    Hi! I need a code for FPGA in VHDL. The project is the implementation of the Simon game with vga graphic usage. The code doesn't need to be fancy or complicated, I just need the simplest dummy code I could get. The game should be played with 4 colors and with the input from FPGA buttons. If you are intrested, we can discuss the in depth details :)

    £168 (Avg Bid)
    £168 Avg Bid
    7 bids

    The aim of this project is to designing and implementing a Data Matrix Code decoder. The most popular application for Data Matrix is marking small items, due to its ability to encode a large amount of data in a small amount of space. Decoding various Data Matrix code images efficiently and accurately is a challenge. This project aim to design and implement Data Matrix Code on FPGA. Helpful pro...

    £139 (Avg Bid)
    £139 Avg Bid
    8 bids

    I'm an FPGA designer and I'm looking for someone to do a verilog code using the FPGA board for a traffic light

    £45 (Avg Bid)
    £45 Avg Bid
    4 bids

    I'm an FPGA designer and I'm looking for someone to do a verilog code using the FPGA board for a traffic light

    £23 (Avg Bid)
    £23 Avg Bid
    9 bids

    I'm an FPGA designer and I'm looking for someone to do a verilog code using the FPGA board for a traffic light

    £41 (Avg Bid)
    £41 Avg Bid
    5 bids

    Require A Front-end GNSS Engineer for Project related building RTK GNSS product from ground zero. 1. FPGA Engineer -- >1 Engineer 2. High Speed FPGA PCB designer - 1 Engineer 3. Kernel and C programmer with GNSS knowledge -- > 2-3 Engineers You can Look similar product on [login to view URL] website. it is similar product for a different company. Kindly Check website of Swiftnav before m...

    £27 / hr (Avg Bid)
    £27 / hr Avg Bid
    5 bids

    Design a UART transmitter to serially transmit data from the DE2 board via the serial link to a PC running a terminal program. The PC should then display the ASCII value of the data transmitted.

    £29 (Avg Bid)
    £29 Avg Bid
    9 bids

    Need someone to develop OFDM waveform on AD9361 or any other transceiver and FPGA.

    £940 (Avg Bid)
    £940 Avg Bid
    16 bids

    It is a project in System Verilog and looking for a candidate with the following desired skills. Desired Skills: C Programming, FPGA, Embedded Systems, System Verilog, Verilog/VHDL, MATLAB and Mathematics

    £180 (Avg Bid)
    £180 Avg Bid
    24 bids

    It is to develop a waveform viewer (WV) that can send data to a PC for display. The data collection is done on the FPGA board. A microprocessor gets data from the FPGA board and sends data to the PC through either a Bluetooth modem or a USB port. The system supports three analog channels, with a single-level triggering. Only 8 bits of precision will be used for each analog channel

    £107 (Avg Bid)
    £107 Avg Bid
    13 bids

    hi i need a need FPGA expert for a small task. i already have all work done just need some little help and its on urgent basis. only bid if you can complete fast and able to start now.

    £116 (Avg Bid)
    £116 Avg Bid
    10 bids

    i need a verilog code for fpga board __ traffic lights associated with LCD.... for example, the light is red... after 10 sec.. a text appears on lcd to tell the cars to be ready to stop... the green light comes on for 30 sec... and so on...

    £7 (Avg Bid)
    £7 Avg Bid
    2 bids

    Require A Front-end GNSS Engineer for Project related building RTK GNSS product from ground zero. 1. FPGA Engineer -- >1 Engineer 2. High Speed FPGA PCB designer - 1 Engineer 3. Kernel and C programmer with GNSS knowledge -- > 2-3 Engineers You can Look similar product on [login to view URL] website. it is similar product for a different company. Kindly Check website of Swiftnav before m...

    £25913 (Avg Bid)
    £25913 Avg Bid
    6 bids

    https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841738/Getting+Started [login to view URL] (Petalinux) Linux build and application development for simple LED blink project. Someone with good FPGA/SoC embedded development experience.

    £178 (Avg Bid)
    £178 Avg Bid
    8 bids

    Who has experience in esp8266, stm32, FPGA can apply for this job. Possible long-term relationship so don't apply if you can't work 25hrs/week from now on.

    £15 / hr (Avg Bid)
    £15 / hr Avg Bid
    29 bids

    Hi, I need FPGA HCS08 Expert we will be using HCS08 DE1 MicroController. more details i will share in chat box. please if you have experience relegated to this bid. thanks.

    £111 (Avg Bid)
    £111 Avg Bid
    6 bids
    £134 Avg Bid
    10 bids

    Design of simple sequential circuits. • Implementation of your designs on an FPGA

    £144 (Avg Bid)
    £144 Avg Bid
    6 bids

    Hello, I need to create a project in VHDL: a simple operations calculator (addition, subtraction, multiplication, and division). The result have to be displayed on the PmodCLP I need this to implement on the board NEXYS 4, Artix 7 FPGA. The VHDL code should be developed in Xilinx ISE. I would need the documentation. Also include as many comments as you can about what is going on so that I can...

    £144 (Avg Bid)
    £144 Avg Bid
    4 bids

    Top fpga Community Articles