Fm transmitter and receiver jobs
I Have Citrix XenApp 7.18 installed in my test environment everything working ok using Citrix workspace and receiver application what I am looking for Configure Citrix XenApp to enable users to access Citrix Receiver from the web using HTML5 technology, without the need for a Citrix Gateway appliance.
I am looking for a reliable package receiver in west of Ireland who can handle packages. The ideal candidate should be able to receive and process packages with specific items expected. The expected turnaround time for receiving and processing packages is within 1 week. Skills and Experience: - Experience in package handling and logistics - Ability to handle packages weighing more than 10kg I need someone who can receive the packages and hold them, until I get someone to collect it from your place. The products would be something like clothes, electronics, cosmetic items.
We are refining our Falcon race timing system for accuracy in the desert, specifically to tracking falcons over a 400-meter co...falcons over a 400-meter course. This system must detect objects (falcon) around 10cm x 10cm, in the outdoor desert environment Key Specifications: - LiDAR Sensors: - Range: Up to 20m. - Aperture: 180 degrees. - Frequency: 100Hz. - Resolution: 0.32 degrees. - Power: 3W. - Connectivity: Visual display timer and device connectivity for real-time tracking, supported by a battery life of at least 4 hours. -Signal Synchronization: Transmitter at the endpoint and receiver at the start for accurate timing. Operational Environment: The design must withstand the desert’s outdoor conditions, howeverwe dont run the race when...
I'm in need of a software-defined radio (SDR) scanner and logger designed specifically for FM band. This tool will be responsible for the following tasks: - Scanning frequencies within the FM band, - Logging signals detected during scanning. The primary application of this tool is for monitoring radio stations, so potential freelancers should have relevant experience in this domain. Furthermore, the interface of the tool should be web-based which implies a solid understanding of web development is also required. Ideally, candidates should have proficiency in developing SDR tools and a proven track record of similar projects.
...engineer to partner for lab project involving: Design of discrete circuit transmitter with specific RF performance requirement that shall be provided as needed. From the DAC output to RF frequency 5GHz. One stage up-conversion. modeling and simulation of the transmitter signal chain that provides performance details related to link budget RF chain analysis, inter modulation and harmonic distortion using RF/microwave circuit synthesis and simulation software for circuit board and subsystem designers called "Genesys" Desirable Skills and Experiences: - Proven experience in the field of electronics. - Expertise in RF circuit and antenna designing. - Knowledge of medium frequency range (1 GHz - 10 GHz) in RF circuit and...
...to fetch messages from Slack and then forward them to Cortex XSOAR for processing. Here's a general approach to achieve this: 1. **Set up Slack API Integration**: Use the Slack API to fetch messages from specific channels or in response to certain events. You'll need to create a Slack app and configure it with the necessary permissions to read messages. 2. **Implement a Webhook or Event Subscription**: Configure your Slack app to send message events to a webhook or subscribe to events such as message creation in the channels you're interested in monitoring. 3. **Develop a Receiver**: Write a Python script or application that listens for incoming messages from Slack through the webhook or event subscription. This receiver should parse the inc...
...FileMaker developer who can help enhance my current database. I have a usb card reader / writer and want the app to be able add the card to that user then add credit to the account, and the Raspberry pi card readers on 2 machines which are programmed and i need to get them to communicate with FM for credit usage etc. - I currently have a FileMaker database in place, so I need someone who is familiar with the software and can hit the ground running. - The specific enhancements I am looking for are related to user interface improvements, adding new functionalities and optimizing the performance of the database. - In terms of functionalities, I am particularly interested in data import/export, custom reports, and automation scripts. Idea...
In this project, you are required to modify the provided MATLAB program to study BSS-based interference suppression in wireless receivers with diversity reception, i.e., receivers with multiple antennas and downconversion chains. Like in the example provided, assume all user signals are QPSK and have the same power level. You will need to write a lab report The full project description and requirements are provided in the attached file. Please don't accept until you look at the description project.
...sub PC or to all sub PC running a "data receiver" Unity3D program. the number of sub PC will be between 1 to 12. 2. Data Reciever - Make a "receiver" Unity3D program that can receive from the Data Sender. The receiver will infinitely wait for data until it is shutdown. 3. Make a document on how to setup the whole project including all instructions related to firewall exemptions and ports. Key Objective: • The prime task includes setting up a main PC that would connect to numerous sub PCs, all running on Windows. The number of sub PCs to connect will vary from 2 to 30 depending on specific requirements. Type of Communication: • The main PC will serve the role of data sender and the sub PCs will act as data receivers, ...
I'm looking for an innovative designer to create a funky, tre...than the grip or protection aspects. The gloves are meant to be eye-catching and fashionable while still being fit for the sport. Ideal qualifications: - Experience in sports accessories design, particularly gloves. - Demonstrated understanding of American football culture and style trends. - Strong graphical design skills. - Ability to incorporate functionality with aesthetics. - Knowledge of materials used in the manufacturing of sports gloves would be a plus. This project is a great opportunity to bring a unique product to the American football market. I look forward to seeing your creativity shine on this project. Must present 5 options similar but not exact to the attached. It should not be a basic...
...of a unique app for Fulcrum which would help me input 2 or 3 coordinates in decimal degrees and their respective bearings to triangulate the location of a VHF transmitter within a wildlife tracking collar. Key Features: - The application should display the located transmitter's coordinates on the Fulcrum map, ideally via a pinpoint or marker. - It should also have the capability to save these specific location coordinates for future reference. - Both manual input and GPS location inputs should be available for the coordinates. Ideal Skills: The ideal freelancer for this project would have in-depth knowledge of app development especially for Fulcrum, a strong understanding of geolocation services and extensive experience in software design to provide a...
I have a network 30 nodes 5 of them (nodes 1-5) have data to be sent to the receiver which is one node (node 10). Other nodes are relay nodes Each node has 5 different options for Bandwidths to be used and different options of frequency ( for now we can assume just one frequency option 1.5e11 Hz for simplicity and later you have to add the frequency option ) So the model should select the optimal path to the receiver and the optimal Bandwidth and frequency selection to minimize the energy consumption. I already did the mathematical model and I know the behaviour of the model and I need the RL model to have the same behavior. when the maximum cluster size is too small (1mm *1mm), the sensor nodes select a higher BW option ( e.g. 100...
I have a network 30 nodes 5 of them (nodes 1-5) have data to be sent to the receiver which is one node (node 10). Other nodes are relay nodes Each node has 5 different options for Bandwidths to be used and different options of frequency ( for now we can assume just one frequency option 1.5e11 Hz for simplicity and later you have to add the frequency option ) So the model should select the optimal path to the receiver and the optimal Bandwidth and frequency selection to minimize the energy consumption. I already did the mathematical model and I know the behaviour of the model and I need the RL model to have the same behavior. when the maximum cluster size is too small (1mm *1mm), the sensor nodes select a higher BW option ( e.g. 100...
...skilled and experienced professional to help me develop a multiplex server (mux) for the purpose of generating a DVB-T2 mux. The key functionality I'm seeking includes: - The ability to connect to multiple studios effectively to take in transmitted audio streams - These streams we're delivering are based on a MPEG-TS coding format, with an approximate bitrate of 80 kbit/s - The developed server needs to be capable of generating one approximately 50 Mbit/s DVB-T2 mux - I would also like the server to be compatible with DVB-C and DVB-S2 broadcast standards, as these will be deliverables from our source. Ideal skills for this project are a deep understanding of broadcasting servers, experiencing with MPEG-TS coding format, familiarity with DVB-T2, DVB-C and...
In this role, my expectations include: -J1939 CAN Protocol establishment for a transmitter and receiver in a truck and bus control application -Development of effective and efficient communication software, using the C language to ensure fluidity and stability of protocol -Identifying any existing problems or bugs with the protocol, finding suitable solutions which aid in improving the project's overall performance The desired freelancer should have in-depth knowledge and experience concerning the C language coupled with a keen understanding of the J1939 CAN protocol. Familiarity with truck and bus control applications will be a significant advantage.
...search of a knowledgeable individual to design an RF transmitter circuit compatible with the rx480e module at frequency 433MHz. Importantly, I need the transmitter circuit to be simple yet effective, with the capability to cover a long-range distance of at least 3km to 5km. With 4 chanel. Key Aspects: - Long-Range Communication: The transmitter circuit should be designed to work efficiently over long distances - a minimum of 3km. - Simple Design: The design needs to be as straightforward as possible, without compromising functionality. - Compatibility: The transmitter circuit must be compatible with the rx480e module. The Purpose: This RF transmitter circuit will be instrumental for a remote control system that is able to control a small relay and...
I want to create Google add on, which can be downloaded by different users. Work: to send multiple email to different users with custome message, attachment and title. These data located in Google spreadsheet which contains the field like name of email receiver, email id, title , name of file for attachment, message etc. There is no constraints for paid users while for free users daily email are limited to 10.
...for Android and iOS Platforms with API Integration We are seeking a mobile app developer with proven experience in developing and launching applications for both Apple and Android platforms. The primary objective of this project is to create a unique messaging application, specifically designed for courier companies, with advanced package tracking and dimension recognition features. Responsibilities: Develop a mobile application for iOS and Android devices that seamlessly integrates package tracking, real-time notifications, and payment system functionalities. Implement integration with the company's existing system through an API, following the provided documentation. Design an intuitive and attractive user interface that allows ...
...possesses skills in both ESP32 programming and Flutter app development. The main task is to add new services to an existing Flutter app. What You Need: - Experience in ESP32 programming - Proficiency in Flutter app development - Understanding of service integration in Flutter apps We need an addition to the software and application. We need a selection tab for RTCM messages. A tab in the application where the user can select the messages they want to activate. There will be messages that are already enabled by default and those that will be possible to select. This must be present in all software that uses GNSS. Regarding Radio Receivers, we have two models, the Radio Receiver without GNSS, and with GNSS. Only the Radio with GNSS will have this tab...
I need a programmer to create a receiver for for end to end monitoring of email infrastructures in accordance to the opentelemetry specification. This receiver will send emails via SMTP every 5 minutes (controlable) and retrieve the emails using a PoP3 account at the same frequency. The key requirements and tasks for this project include but are not limited to: - Generating and documenting metrics and logs from the email process, including: - The number of emails sent - The number of emails received - The number of failed email transmissions - Cycle time for each email between send and receive - for SMTP and POP3: Bytes Transferred, Bytes per Second, Connect Time, Lookup Time (when DNS Name is used instead of an IP Ad...
I need a Truck Booking app with 3 modules (Carrier Module, Driver Module and Admin Module) Platform: Android and Web for now. (IOS later as a separate project). Carrier Module: Enable the carrier to create new trips and created multiple bookings under each trip. Should be able to assign a Driver to each trip. Also need payment Gateway and Whatsapp integration for bookings details to be shared with sender and receiver. I need a password based login, multiple language support, PDF printable format trip details for carrier. Driver Module: Driver should have visibility to the only Trip he is assigned with. He should be able to update the corresponding status of the trip. Driver Specific login details, mostly all details frozen. Admin Module: The mas...
Project Title: STM32F0 IR Transmitter Project Description: We are seeking a skilled developer to implement the Phillips RECS80 protocol, as described in the SAA3008 datasheet, on an STM32F072 microcontroller device. The project will involve utilizing the Keil compiler with STM Low Level Drivers (LL) to develop firmware for the IR transmitter. Please note that the project should not use the HAL driver. Responsibilities: - Implement the Phillips RECS80 protocol on the STM32F072 microcontroller. - Develop firmware using the Keil compiler and STM Low Level Drivers (LL). - Utilize the IRTIM peripheral on the STM device, with TIM17 for the carrier frequency and TIM16 for data transmission. - Interface the IR LED through an MMBF170 N-Channel FET on the GPIOB9 pin. R...
...convenience and automation. Hence, your expertise in this realm would be highly advantageous. Your bid should include your approach, timeframe and a list of required devices for the project. Looking forward to your proposals. More details: Smart home. The smart home system has the following parts. Transmitter Several buttons are connected to the ports of an Arduino Pro Mini. When the respective button is pressed, and the gate goes low, a signal is sent to the receiver. The signal is sent with LoRa. (RFM95 433MHz) The transmitter is powered by 3 AAA batteries or an equivalent battery. The power circuit is replaced with a circuit that draws very little power. see this video Create a Gerber file for the PCB. Receiver The receiver...
...an RC vehicle from an Android application using a long-range class 1 Bluetooth receiver or transceiver W/Wifi Possibly using a ESP32 devise/module Key Components: - Create a Bluetooth S-Bus PPM module - Enable control from an Android application - Use long-range class 1 Bluetooth Rx or Transceiver Primary Functions on App: - Control of the vehicle's throttle - Control of the vehicle's steering Skills & Experience: - Expertise in Android App Development - Proficiency with Bluetooth Connectivity - Background in RC Vehicle Control System Development Turnaround: The ideal candidate will be able to deliver a fully functioning module within a month. The proposed deadline is important but the adherence to quality and functionality is paramount. Looking forward...
...glossy magazine for a special 50th birthday project, designed specifically with the receiver in mind. - Design Focus: The magazine is for a single reader, the person celebrating the birthday, and should be personalized to their tastes and interests. - Available Content: All content, including text and photos, is already available for you to utilize. Your role will be focused on the design and layout, bringing together the materials into a cohesive and engaging format. ( if available please provide historic project references ) - Theme: The overall feel of the magazine should be both personal and luxurious, akin to an exclusive glossy magazine ( JFK magazine, Bazaar, Vogue, Elle Decor.) High end luxury - Skills and Experience: Ide...
...closing our old website and integrating its content to our new website kingsmen.dk. is almost complete, just needs the final finishing touches and functionality checks. I need a website designer that can help me complete with the new updates, make sure everything is functional. Some of the most important tasks are but not limited to: A) Completing and updating i)Remove alba logo and make kingsmen logo slightly bigger ii)Add submenu to the main menus “om os”: ”Om os” menu has to have 3-Sub-menus : Om os; mere om kingsmen; & sikkerhed. -”om os” -links to the first page om os. This text here is a short intro about kingsmen. On this front page, the end text here which is clickable “mere om kingsmen” ...
I require a robust Arduino Uno DLMS (Device Language Messag...communication with Smart Meters. Key Features: - Exclusively supports wired connections, no wireless functionality needed. Supported communication protocols: - RS232 (Recommended Serial) - UART (Universal Asynchronous Receiver/Transmitter) Ideal Freelancer: The perfect freelancer for this job should have a strong background in Arduino and embedded systems. They should also have in-depth understanding and working experience with DLMS/COSEM metering systems and the mentioned protocols. Outstanding proficiency in Arduino programming is vital as effectiveness, efficiency and readability of code is key. Please note, the successful candidate might need to conduct independent research to...
I'm seeking an experienced PCB designer to help create a high-resolution, low noise, wide dynamic range CMOS image sensor for a surveillance camera system. The design should prioritize minimal image distortion while maintaining high per...changing light conditions. Key requirements are: - Experience with PCB design, particularly with CMOS image sensors - Proficiency in creating high-resolution, low noise circuits - Ability to incorporate Wi-Fi capability in the PCB design I am planning to use RTC6705 5.8GHz for FM transmission. It will use in FPV camera. The ultimate objective of this project is to produce an efficient and high-performing sensor for surveillance cameras. Your knowledge and expertise in this specific niche will be highly appreciated and ...
...similar examples of commercially available music and translate well across a typical set of listening systems. Some tracks will require restoration of some kind. One track will be provided as a set of stems for stem-mastering, allowing you to dig deeper into solving any audio problems. For each master, provide a 200-word, illustrated mastering report of your process, omitting the mundane and including a maximum of 5 labelled screen-grabs of notable processes: in addition to the quality of your masters, these reports are how you demonstrate your skills and thought processes. Part B: DDP & Apple Digital Masters 1. Create a DDP data package ready for CD duplication that includes your four mastered tracks. Ensure your DDP package includes a PQ Sheet and ...
Overview: This project develops a Windows application to directly control FLIR cameras using a LattePanda mini PC and its integrated Arduino. The application will leverage the FLIR Atlas SDK (and later, the FLIR Science SDK) to communicate with the camera, while utilizing the Arduino's built-in radio receiver to process PWM signals. Objectives: - Hardware Integration: -- Establish a seamless interface between the LattePanda's Windows environment, the Arduino co-processor, and the FLIR camera. -- Configure the Arduino's radio receiver to accurately decode PWM signals. - Software Development: -- Create a Windows application using the FLIR Atlas SDK (and in the future, the FLIR Science SDK) to issue commands to the FLIR camera (star...
...help me with a wireless transmitter. The device should have the following characteristics: - Primarily, it will be used for mobile devices, home appliances, and audio equipment. Therefore, some knowledge and experience in these areas will be required to ensure seamless integration. - The wireless transmitter should have a medium range capability. This means that it should be able to effectively transmit data signals to a distance of 100 to 500 meters. - Moreover, the wireless transmitter is expected to transmit data signals. Accordingly, having a solid foundation in data transmission and understanding the latest standards will be critical. An ideal candidate for this role should have a solid background in electronics engineering, particula...
...farm, with lush green pastures and numerous cows grazing peacefully. Informing that we track cow by Two technology 1. RFID and 2. Face Recognition Technology through Video Camera [Scene 1: RFID Tagging Technology] RFID tags are shown being attached to the ears of cows. These tags contain unique identification numbers. As the cows move around the farm, RFID readers capture real-time data from the tags. The data is transmitted to the receiver, then to the cloud, and finally to the data management system. [Scene 2: Face Recognition Technology] Animated cameras are shown strategically placed around the cattle farm, equipped with face recognition technology. As a cow approaches the camera, its face is scanned and identified. A notification is sent to th...
This project purpose is to receive PWM signals from IA6B receiver, process them and control 5 output motors by these signals.
...am in search of a knowledgeable individual to design an RF transmitter circuit compatible with the rx480e module at frequency 433MHz. Importantly, I need the transmitter circuit to be simple yet effective, with the capability to cover a long-range distance of at least 3km. Key Aspects: - Long-Range Communication: The transmitter circuit should be designed to work efficiently over long distances - a minimum of 3km. - Simple Design: The design needs to be as straightforward as possible, without compromising functionality. - Compatibility: The transmitter circuit must be compatible with the rx480e module. The Purpose: This RF transmitter circuit will be instrumental for a remote control system that is able to control a small relay and through tha...
I am in need of a proficient hardware/software engineer to develop a logical transmitter system as per my specifications. The proposed transmitter should possess 4 inputs (2xPT100, 1x 0-5V, and 1x CAN) in addition to a 0-5V output. The transmission should be enabled via CANJ1939 communication. Project Requirements: - Proficient in C++ programming as it's our preferred language for this project. - Experience in both software and hardware development, specifically in creating circuits and programming logical operations. - The transmitter's primary function is to control a system. Hence, the professional should have practical experience in control systems design and implementation. - There are no size constraints for this device, giving th...
Hi A B M Abu Y., I noticed your profile and would like to offer you my project. We can discuss any details over chat.
...strategy outlined and will share it with the selected freelancer upon project commencement. Here's what I'm seeking for this project: • Conceptual understanding and programming skills in using the C language, specifically for the STM32F4 microcontroller line. • Proficiency in understanding microcontroller functionalities, architecture, and interfacing techniques. • Ability to deliver the project promptly as time is a significant factor for this assignment. witht he folowing requirements it uses a stm32f446zet6 5 DRV8871DDA hbridge drivers and a IA6B connected via pwm - HB led, blink every second - receive con, on if signals being received from receiver input pins - drive active leds off when drive not receiving pwm signal ...
Logo for topographic and architectural surveying company Name that must appear on the logo: FM Levantamentos Elements related to the activity...you can insert anything into a topography/GPS device Good work everyone
CubeSat satelite will be at least 550km above the earth. Elevation angle will be 20 degrees. LoRaWAN protocol will be used for the communication between sensor and CubeSat. Sensor could be any sensor like temperature and humidity sensor. Sensor transmitter power will be at least 23dBm. Tx uplink frequency will be from 148MHz to 150MHz (10 channels from 148.1MHz to 149.9Mhz with 200kz between channels, LoRa bandwidth 125KHz) RX downlink frequency will be from 137MHz to 138 Mhz ( total 3 channels, RX1 137.1MHz, RX2 137.3 MHz, beacon 137.1 MHz). LoRaWAN Protocol version will be 1.0.3. Sensor should support Clas A/B/C operations. Jobs that will be done: 1) Hardware Design of a LoRaWAN IoT sensor ( Schematic, Layout, PCB) for the given frequencies usin SX1276 chip 2) Custim...
...forensic report covering both mobile phone and computer communications. In my endeavor, I am naively striving to prove that I have never contacted a certain individual via calls, texts, or emails. Key Requirements: - Detailed examination of my devices (both mobile and computer) for traces of communication with the specified individual. - Extraction of Sender/Receiver details, notwithstanding any potential communication content. - Even though I am unsure about some specifics, I am keen on uncovering any contact information related to the person in question. Ideal Candidate: - Extensive experience in digital forensics, particularly in communications. - Proficient in data recovery and extraction from various devices. - Discreet, professional and thor...
I'm seeking professional who has hands-on experience with Arduino Nano BLE 33. If you have a solid understanding and knowledge of Manchester coding and MIL STD 1553 Bus, transmitter and receiver communication, as well as DMA and ADC/Interrupts, then this project is for you. Having the microcontroller on hand is an advantage. While I have skipped the specifics on some functionalities, the ideal candidate should be comfortable with: - Data logging and storage - Wireless communication - Sensor integration.
I am seeking a talented and knowledgeable individual to incorporate accelerometer, gyro, and compass fusion into a GPS receiver. The primary goal of this upgrade is to improve the motion detection capabilities of our current GPS system. I strongly prefer someone with relevant experience in electronics, engineering, sensor fusion technology and GPS technology. This is for identifying precise location within sampling pulse of GPS. Lastly, while this project does not have a strict deadline, it's essential that the candidate follows an organized and efficient workflow. Skills & Expertise Required: - Sensor fusion Technology - Electronics - Engineering - GPS Technology - Proficiency with different types of acceleration data is a plus.
I'm looking to implement SMS and Whatsapp APIs in Java in order to automate business processes for International users (EU, US, CA, AUS). We should be able to specify the receiver number (with country code) along with the message. The messages are transactional (no bulk messaging). Key Requirements: - Integrate SMS and Whatsapp APIs from any cost-effective gateway into Java code. - Ensure the ability to send messages via SMS and Whatsapp to receiver numbers. - Create a reliable solution and demonstrate it working on numbers in given countries. Ideal Skills: - Experience in API integration, specifically SMS and Whatsapp APIs - Java
Logo contest to combine the "F" in the FM logo, with the "M" in the M logo. Put the "F" on top-left of "M", staggered. On the FM logo, remove the "M" and the Texas state background. Keep only the "F". On the M logo, remove "marcus". This is just an idea we want to see and open to other similar ideas. Required to use same colors as logos provided. The "AF-logo" attached is a second idea we like, to do something similar with the FM and incorporating a football.
...extensive area of 200x200 meters. The system architecture consists of a central main node and multiple field nodes strategically dispersed across the field, ensuring seamless control, monitoring, and battery management functionalities. Key Features: • Main Node Integration with Raspberry Pi: • The central main node is seamlessly integrated with a Raspberry Pi 4, featuring a touchscreen interface. We have developed an intuitive GUI to simplify configuration and operation processes. • Field Node Configuration: Each field node, spaced at intervals exceeding 150 meters, is equipped with two digital outputs and two digital inputs. These nodes utilize Raspberry Pi Pico microcontrollers for efficient data processing and wireless communication. ...
...maintaining the esthetic appeal of my stucco wall. Below are the details of what I'm aiming for and the type of freelancer that would be the perfect fit for this project. - **Objective**: The primary goal is to hide all TV cords behind the wall for a clean, seamless look. The stucco wall should then be painted to match the existing walls, ensuring the area looks as if untouched. - **Equipment Integration**: - Installation of a 5 channel speaker system, receiver, DVD player, Apple TV, cable box, and a Sonos system. - Includes concealing existing wiring for 2 external video cameras system; all components to be neatly organized in a 3-piece media console under the TV. **Ideal Skills and Experience**: - **Professional Audio/Visual Installation...
I need an expert to prepare a detailed report on "camera as a receiver in visible light communication". This is for an academic assignment. I require the report to convey advanced technical details on the subject matter. While the report should cover all major aspects of VLC using a camera as a receiver, I have not specified any topics to prioritize. Thus, your expertise and suggestion on the content would be greatly appreciated. Ideal contractor should have: - Proficiency in technical report writing. - Deep understanding of Visible Light Communication (VLC). - Ability to explain complex technical concepts in an accessible manner.
I'm seeking an adept professional capable of implementing RFID or UHF technology for wireless power transmission and reception over long distances. The prime utilization of this technology will be for a micro lighting application, specifically decorative lighting purposes. Key features desired: - Possibility of selecting individual LEDs/tags that are on/off - Range/Distance must be a minimum of 1 meter - prefer 2 meters + - System must be safe; pass electromagnetic testing requirements for various markets/regions including North America (US, Canada, etc), Europe and others - Lights MUST be able to remain lit and not only blink (blinking can be an offered feature however they must be able to remain on when receiving the power signal) - I have included a few phot...
