Altium file format jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    1,209 altium file format jobs found, pricing in GBP

    I need three zigbee modules using E18-MS1PA1-IPX: - 1st board load cell or pressure sensor for weight(20kg) - 2nd board humidity and temperature sensor, OL...liquid or powder(20~30cm) That's really about all the information I can provide you, what can I say, my needs are simple, the idea is simple(in a day). I need PCB3D. can use Altium designer.

    £415 (Avg Bid)
    £415 Avg Bid
    17 bids

    Design a 8 port Ethernet switch. The chipset will be specified (uses 2 switching ICs and 8 phy chips). You will be required to create schematics symbols, schematics sheets, footprints for ICs and layout.

    £445 (Avg Bid)
    NDA
    £445 Avg Bid
    17 bids

    ...it) The board must be as small as possible and must not exceed 10mm of total thickness I want receive 3 complete board (not with variscite board) tested and the project file (altium i prefer) (if requested, once agreed, the initial design of the old card will be provided, the card has doors different from the above and too abundant dimensions)

    £936 (Avg Bid)
    £936 Avg Bid
    6 bids

    ...a complete BOM. I have attached a block diagram in the files section, yeah...sorry it's the best I can do. You're also welcome to suggest changes to the BOM. You can use Altium, EagleCad, or KiCad for the boards design. That's really about all the information I can provide you, what can I say, my needs are simple, the idea is simple. BOM: (This

    £99 (Avg Bid)
    £99 Avg Bid
    67 bids

    I need a Altium PCB expert for a small project. I need some changes in Altium PCB design.

    £94 (Avg Bid)
    £94 Avg Bid
    51 bids

    Need a PCB design in altium designer 14 or above schematic will be provided in altium 14 need PCB design including component library creation and 3d component creation PCB size will be 100mmx50mm for a rough idea here is my block diagram of the project. [login to view URL]

    £135 (Avg Bid)
    £135 Avg Bid
    16 bids

    I would like to ...schematic and BOM for me; then I will do the prototype and test it. The magnet will need to be powered using an external power supply (12V power supply) I need you to use Altium Designer to make the schematic. Magnet Specs: Voltage: 12V Link:[login to view URL]

    £22 (Avg Bid)
    £22 Avg Bid
    10 bids

    I would like to fabricate a PCB which the RF output power for Nordic 24L01 can be enhanced. It can be achieved by Maxi RF amplifier MCP01. The PCB should include...(please see attachement) - Corresponding schematic include - built-in RF antenna with acceptable transmission/ receiving (10m range) - Pass DRC and exported Gerber - prefer Altium designer

    £148 (Avg Bid)
    £148 Avg Bid
    23 bids

    I'd like to develop PCB board using altium designer. I have the block diagram for device I am gonna develop. Candidate MUST have professional skills and experience in circuit design, PCB design and firmware programming.

    £8 - £23
    Sealed
    £8 - £23
    4 bids

    I would like a board designed in Altium Designer, KiCAD or Eagle that is PIN compatible with the ZYBO Z7-20 board from diligent, but has only the essential circuitry required for RAM, Power, Jtag, and the CSI camera. Please and thank you.

    £12 - £19 / hr
    £12 - £19 / hr
    0 bids

    I would like a board designed in Altium Designer, KiCAD or Eagle that is PIN compatible with the ZYBO Z7-20 board from diligent, but has only the essential circuitry required for RAM, Power, Jtag, and the CSI camera. Please and thank you.

    £456 (Avg Bid)
    £456 Avg Bid
    26 bids

    ...be done in Altium, based on EN standards. I saw your profile on Freelancer and you seem qualified to do the work. What do you usually need to proceed on a project, apart from the electrical schematics of the card? How do you determine the lead time for this work? Are you fine to sign a NDA for this project? Which version of Altium are you using

    £1543 (Avg Bid)
    £1543 Avg Bid
    1 bids

    make altium pcb design in Altium

    £9 (Avg Bid)
    £9 Avg Bid
    1 bids

    ...are up tonight. There is a PCB design already done in Altium Designer that contains a USB-C connector in it. This was a TE Connectivity USB connector. All we need you to do is to swap this connector with a Molex USB-C connector, the Datasheet of which will be supplied. All it takes is running Altium and about half an hour to spare. It's a tiny 4 layer

    £19 (Avg Bid)
    £19 Avg Bid
    32 bids

    I have a 4 layers PCB fully done in Altium Designer with the following chips on board : XC7A50T-2FTG256I, FT601Q, AD9361BBCZ, TPS2069C-DBV, LM2832XMY, N25Q256A13EF840E, IS66WVH8M8ALL-166B1LI, SN74LVC2G17.. Since the project is done in Altium, I need someone who master Altium Designer to connect a new EXP main connector to the FPGA. Some nets may be

    £139 (Avg Bid)
    £139 Avg Bid
    27 bids

    The Project requires a PCB layout for data acquisition using Altium Designer Software. Requires input connectors, analog pre-amp circuit, and ADC`s with all digital outputs on a single ribbon connector. I want a complete logical diagram and PCB layout diagram to be produced. Data sheets for major components will also be supplied. A full set of manufacturing

    £833 (Avg Bid)
    £833 Avg Bid
    41 bids

    Draw schematic and pcb layout for board.3D view also should be available Result is project in altium designer which include: 1. Library with schematic component, footprint, 2. Schematics file 3. PCB layout file

    £41 (Avg Bid)
    £41 Avg Bid
    24 bids

    We have a design that we want to redraw for Altium. It's a signal amplifier with resistors, capacitors and OAMP'S. The project is well documented, and detailed SCH will be distributed in PDF, BOM in EXCEL and Gerber for top and bottom as digital files. It's only one sheet of drawing in this design

    £133 (Avg Bid)
    £133 Avg Bid
    20 bids

    We have a design that we want to redraw for Altium. It's a signal amplifier with resistors, capacitors and OAMP'S. The project is well documented, and detailed SCH will be distributed in PDF, BOM in EXCEL and Gerber for top and bottom as digital files. The attachment shows one drawing of 3.

    £257 (Avg Bid)
    £257 Avg Bid
    30 bids

    The Project requires a PCB layout for Intrinsically Safe Apparatus using Altium Designer Software. Experience with layout of Intrinsically safe PCB’s is a bonus. Main requirements/details are as follows: PCB Layout Make part footprints if required Schematics will be provided Approx. 40 components Approx Dimensions of PCB: 25x52mm Double sided PCB

    £106 (Avg Bid)
    £106 Avg Bid
    25 bids

    We are looking for PCB and Schematic Diagram Designers adept at using Altium Designer. State in your proposal the complexity of the PCB designs that you have worked on, the applications that you have designed schematics for, as well as your hands-on experience in practising DFM / DFA. Begin your proposal with the words "Substrate" or " Track". You will

    £9 / hr (Avg Bid)
    £9 / hr Avg Bid
    15 bids

    H...CADint and I would like it converted to Altium. It is a small board so it should not be that big of a task. Board is 20x30mm. It is less than 25 components. It is a four layers PCB. Attaching a brief drawing. We will provide CAD int design files and we would like a corresponding set of design files for Altium. Please ask for details if needed.

    £180 (Avg Bid)
    £180 Avg Bid
    6 bids

    Hey, How are you? I have few files in KiCAD format. I want them in Altium. And i also want the layout of the board. Everything should be same as in KiCAD. Just in Altium. I can send the files on chat and you can let me know. Its a PICOEVB Board. Thanks

    £62 (Avg Bid)
    £62 Avg Bid
    1 bids

    Hey, I have few schematic files in KiCAD format. I want them in Altium. And i also want the layout of the board. Everything should be same as in KiCAD. Just in Altium. We can discuss more on chat. Its a PICO EVB Board.

    £62 (Avg Bid)
    £62 Avg Bid
    1 bids

    Hey, I have few schematic files in KiCAD format. I want them in Altium. And i also want the layout of the board. Everything should be same as in KiCAD. Just in Altium. We can discuss more on chat. Its a PICOEVB Board.

    £62 (Avg Bid)
    £62 Avg Bid
    1 bids

    Hi Indir O., I noticed your profile and would like to offer you my project. We ca...and would like to offer you my project. We can discuss any details over chat. I have few schematic files in KiCAD format. I want them in Altium. And i also want the layout of the board. Everything should be same as in KiCAD. Just in Altium. We can discuss more on chat.

    £62 (Avg Bid)
    £62 Avg Bid
    1 bids

    It must be modeled on PicoEVB Board in Altium. [login to view URL]

    £388 (Avg Bid)
    £388 Avg Bid
    8 bids

    We are looking for PCB and Schematic Diagram Designers adept at using Altium Designer. State in your proposal the complexity of the PCB designs that you have worked on, the applications that you have designed schematics for, as well as your hands-on experience in practising DFM / DFA. Begin your proposal with the words "Substrate" or " Track". You will

    £7 / hr (Avg Bid)
    £7 / hr Avg Bid
    19 bids

    Need an Altium symbol for MC58113.

    £116 (Avg Bid)
    £116 Avg Bid
    5 bids

    ...sense, if my circuits are functional, and an ability to create the full PCB design in a timely manner. The deliverables for this project will be 2 revised circuit diagrams, Altium PCB design files or equivalent, and Gerber files that should be ready to send to a manufacturer. Attached are some image and pdf files for the circuit as currently designed

    £160 (Avg Bid)
    £160 Avg Bid
    19 bids

    Converting og a brd to altium.....

    £104 (Avg Bid)
    £104 Avg Bid
    5 bids

    Hi Jin I have several projects coming up for altium SCH and PCB design. Are you interested ? Also; i need from time to time to convert cadence PCB (.brd) into Altium Intereseted ? best regards Mikal

    £27 / hr (Avg Bid)
    £27 / hr Avg Bid
    1 bids

    Looking for a person who can make library symbols, pad stacks, and layout for Altium.

    £15 / hr (Avg Bid)
    £15 / hr Avg Bid
    8 bids

    Need only schematic design and BOM file using Altium Designer. I want to make POE circuit design for Raspberry Pi 3. It must be capable of supplying over 70W power for the device to be controlled. Relevant freelancer who can handle this project smoothly will be awarded PCB design by next project. Thanks.

    £62 (Avg Bid)
    £62 Avg Bid
    2 bids

    We will supply files for 4 PCB boards in Altium Designer (Creative Commons) + company logo, and we would need that you add the logo in the boards, then supply the modified Altium Designer files + ODB++ manufacturing files + Gerber manufacturing files

    £24 (Avg Bid)
    £24 Avg Bid
    35 bids

    need a good pcb designer to make changes to existing altium project changes i will explain in chat

    £45 (Avg Bid)
    £45 Avg Bid
    38 bids

    i have pcb file which placed all components. it is very small pcb and components. I need to be done on Altium designer. i need to need only routing

    £21 (Avg Bid)
    £21 Avg Bid
    13 bids

    i have pcb file which placed all components. it is very small pcb and components. i will attach image of the pcb. I need to be done on Altium designer. i need to need only routing

    £120 (Avg Bid)
    £120 Avg Bid
    47 bids

    small modification of existing PCB with Altium designer.

    £22 (Avg Bid)
    £22 Avg Bid
    5 bids

    Hi, I need to create a prototype of my idea for a LED Light PCB/Quantum Board. The board will be: 400watt total LED diodes ≈ 3w each. Please contact me if you have dealt with this type of project before. See attachment for example.

    £111 (Avg Bid)
    £111 Avg Bid
    27 bids

    I need someone with Cadence Allegro to export an allegro PCB layout into ascii (.ALG) in order to import it in Altium.

    £81 (Avg Bid)
    £81 Avg Bid
    4 bids

    Hi i have a existing PCB design in DIPTrace, i need a designer who cant edit this pcb design according to my requirements , if he can convert it into to altium before editing it would be perfect

    £30 (Avg Bid)
    £30 Avg Bid
    6 bids

    I'm a person who would like to design a PCB LED light for production and need to have it drawn up in Gerber format. The board is a 400W full spectrum light consisting of 3 color spectrums: whites, reds and blues. The diodes are placed on the board as follows: x x x x x x x x x x x x x x (96*white) x x x x x x x x x x x x x x (96*white) x x x x x x

    £79 (Avg Bid)
    £79 Avg Bid
    16 bids

    Hi ! I currently need pcb layout engineer to upgrade my personal fpga board. It previously used Spartan 3E FPGA PQFP (PQ208/PQG208) package using the pow...The voltage regulators are in SOT-223-3. There are some new components too... There are all the links to other parts of the circuit to be re-layout. The work must be done in Altium Designer.

    £203 (Avg Bid)
    £203 Avg Bid
    29 bids

    Provide PCB layout with the following components: 4 x BNC inputs and 4 x BNC outputs Each incoming ci...x BNC inputs and 4 x BNC outputs Each incoming circuit to go through a rotary switch then on to one of 29 LC filters (as per attached), then to the output. Needs to be in Altium Designer. More information will be provided to interested freelancers.

    £96 (Avg Bid)
    £96 Avg Bid
    26 bids

    I have a small PCB, where you need to do optimal component placement and wiring of the same. Its a 2 layer PCB, where all the PCB footprint are provided. If you require, you need to correct some pad size also for better easier and nicer production of the final PCB. I have done some basic placement, which you need to complete, so that all the components fits properly and related components are toge...

    £80 (Avg Bid)
    £80 Avg Bid
    22 bids

    Design a circuit and a PCB with 11x11 mm using Altium. 4 Layers

    £339 (Avg Bid)
    £339 Avg Bid
    47 bids

    Find the freelancers who can make the following elements 3D in Altium. - LCD(128x32, 128x64) - NetWork Interface(1x1 port,1x4 port, 2x3 port, 2x4 port, 2x8 port) - USB (A. B , Mini) You need to make the above elements 3D like original.

    £116 (Avg Bid)
    £116 Avg Bid
    6 bids

    I need a fpcb designer, who can design a small fpcb comparable with the screen in the attachment. On the one side a temperature sensor SHT3X from Sensirion and on the ...screen in the attachment. On the one side a temperature sensor SHT3X from Sensirion and on the other side fpc stiffener with 4 contacts and 1.0mm pitch. Preferred apllication: Altium

    £118 (Avg Bid)
    £118 Avg Bid
    11 bids