MEMS design jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    196 MEMS design jobs found, pricing in GBP

    making and creating mems for insta and fb

    £8 / hr (Avg Bid)
    £8 / hr Avg Bid
    14 bids

    I need an editor for my videos, I'm new to the editing so it takes so much time and I can't make it up as I am at this moment, I need editor that can edit gaming videos put up some mems here and there and can do better job than me, of course per vid I will give 20$ and if the channel getting better I will raise it as much as I can! The editor need to be at least 18+ have sense to memes a...

    £63 (Avg Bid)
    £63 Avg Bid
    36 bids

    Version 2.0 of RTSP Stream Server for Raspberry Pi 1) Fullscreen preview on framebuffer (eg. PiTFT screen and/or HDMI) 2) Audio from ALSA microphone. Could be USB or I2S MEMS 3) GPIO buttons to digital zoom in/out (GPIO 22 and 23) 4) GPIO button to take photo/snapshot (GPIO 17) 5) GPIO button to toggle grayscale (GPIO 27)

    £480 (Avg Bid)
    £480 Avg Bid
    1 bids

    Investigate the source of noise in a product, provided mathematical models and solutions to reduce the noise.

    £16 (Avg Bid)
    £16 Avg Bid
    1 bids

    Hello All freelancers we are manufacturer MEMS as I mentioned the details on attached files we are going to develop our business through our website , social media , brochure and other thing with good contents with standard SEO . ones who have related industry experiences are in priority .

    £56 (Avg Bid)
    £56 Avg Bid
    13 bids

    We are inventors of novel electronic circuits, located in VANCOUVER, B.C. Canada. Attention: This call is NOT for designing PCBs or programming! It's for designing an integrated circuit (IC) OASIS compatible! We plan to produce a proprietary SENSOR CHIP in mixed signal technology, based on an INTEGRATED 24bit counter, and 24bit shift register. The CHIP (=IC) will have confirgurable sub-circu...

    £10274 (Avg Bid)
    £10274 Avg Bid
    12 bids

    Hello freelancers, Its needed to design a sensor node that its used to get the weight(as a bathroom weight scale up to 200kg and a resolution of 50 grams), temperature/pressure/humidity and location then transmit the data via the Lora module. This HW shall run on battery, so overall its requires a low power consumption. The transmission range shall be up to 10KM(~6 miles). To complete the proje...

    £594 (Avg Bid)
    £594 Avg Bid
    43 bids

    Need a team or individual that can develop and supply the following two types of vibration sensors: 1. One axis accelerometer with built-in electronics for FFT data capture 2. Triaxial using MEMS with built-in electronics for FFT data capture Details: 1. MEASUREMENT PARAMETERS - VIBRATION AND TEMPERATURE 2. APPLICATION – ROTARY MACHINE 3. OUTPUT – o 400 LINE FFT (Frequency, Veloc...

    £1589 (Avg Bid)
    £1589 Avg Bid
    9 bids

    My laboratory is researching drug delivery with nanocapsules in blood plasma. We need a method to reliably separate the blood plasma and nanocapsules. The capsules have a mean diameter of 292 nm, and a higher density relative to blood plasma. We have turned to acoustofluidic MEMS devices, given prior reported results. We are looking to replicate the MEMS device reported in another paper. The Wu 2...

    £738 (Avg Bid)
    £738 Avg Bid
    2 bids

    We are a business developing and manufacturing MEMS based electronic components. We need a 3D modelling and photorealistic rendering of one of our up coming products. Hand sketches and dimensions will be provided. The successful applicant will need to translate that into a Solidworks or equivalent 3D model together with a photorealistic rendering of the part. The 3D model and rendering will be an ...

    £72 (Avg Bid)
    £72 Avg Bid
    58 bids

    Micro/Nano Mechanical System Design and Fabrication process of MEMS switch by Surface MicroMachining Processes.

    £15 - £22
    Sealed
    £15 - £22
    4 bids

    Micro/Nano Mechanical System Design and Fabrication Process of MEMS piezoresistive sensor using Bulk Micro Machining process

    £15 - £22
    Sealed
    £15 - £22
    3 bids

    "Ph.D level of expertise required for Multinational Organizations that are skilled in Micro Electroechanical systems(MEMS)"

    £141 (Avg Bid)
    £141 Avg Bid
    3 bids

    Hi, This project is to develop a Bluetooth Audio Communication which will include 1) A Bluetooth Microphone (MEMS Microphone, BLE Audio/Data) 2) A Bluetooth Speaker for real time audio streaming from microphone to speaker. The microphone and speaker will pair automatically. You will design circuit, write necessary codes, simulate and implement using Proteus. You will deliver 1) Circuit Schematics...

    £1943 (Avg Bid)
    £1943 Avg Bid
    14 bids

    Hi, This project is to develop a Bluetooth Communication which will include 1) A Bluetooth Microphone (MEMS Microphone, BLE Audio/Data) 2) A Bluetooth Speaker for real time audio streaming from microphone to speaker. You will design circuit, write necessary codes, simulate and implement. You will deliver 1) Circuit Schematics, 2) PCB design, and 3) Firmware in Proteus, 4) Device 4 pcs and 5) Comp...

    £981 (Avg Bid)
    £981 Avg Bid
    7 bids

    Hi, This project is to develop a Bluetooth Communication which will include 1) A Bluetooth Microphone 2) A Bluetooth Speaker for real time audio streaming from microphone to speaker. From your profile, I have found that you have experience on MEMS microphone and small speaker. Your expertise will be helpful to develop this project. Though it is a small project, I will appreciate your help. I ha...

    £225 (Avg Bid)
    £225 Avg Bid
    1 bids

    In a custom board based on ARM mbedOS and nrf52840 I am currently using the MPU9250 gyro with a custom, event-based gesture recognition algorithm to identify user gestures like shaking, tapping etc. This gyro is now EOL and will be replaced with the ST LSM6DSOX which includes also a machine learning core. For the LSM6DSOX there is already a library/driver existing for mbedOS which allows to acces...

    £143 (Avg Bid)
    NDA
    £143 Avg Bid
    7 bids

    Main Electronic components of device: - Raytac’s BLE 5 Module based on Nordic nRF52832 and ARM Cortex – M4F processor - LIS3DH 3-axis MEMS accelerometer - Holteck BS83B16A-3 touch module - Fingerprint BIOSEC TM2722B40CM

    £645 (Avg Bid)
    £645 Avg Bid
    14 bids

    Our project title is " Vehicle accident place detection and rescue system using Raspberry Pi 3 MODEL B, MEMS sensor, GPS, GSM and Web Camera ". We want our project code to be written and must be able to execute it anywhere even on our own our project kit. Need a reasonable bid amount.

    £129 (Avg Bid)
    £129 Avg Bid
    6 bids

    Our project title is " Vehicle accident place detection and rescue system using Raspberry Pi 3 MODEL B, MEMS sensor, GPS, GSM and Web Camera ". We want our project code to be written and must be able to execute it anywhere even on our own our project kit.

    £122 (Avg Bid)
    £122 Avg Bid
    6 bids

    The microphone in which the audio is being measured communicates with an I2S Philips audio protocol. A fast Fourier transform need to be implemented on an audio analysis coming from an ICS43434 or INMP441 microphone, the audio input comes from the MEMS digital microphone with I2S digital audio protocol. Using a STM32L496RG or a ESP32, direct memory access has to be implemented (DMA) so we have fa...

    £210 (Avg Bid)
    £210 Avg Bid
    7 bids

    Coding to ATMEGA328, input is UART commands that run predefined functions. Also bringing up Python in R-PI4 and running functions that generate UART commands

    £380 (Avg Bid)
    £380 Avg Bid
    13 bids

    I would like work on embedded systems field i am interested in that [login to view URL] new for freelance also.i have more than 1 year of experience in Embedded systems field.i have knowledge in ZigBee,lora, Arduino IDE ,Arduino Uno, Arduino mega Arduino nano,ARM stm32, proteus,keil software,GSM,gps,RSSI ZigBee,[login to view URL] c,c++,python(sensor level), assembly language, embedded [login to v...

    £11 (Avg Bid)
    £11 Avg Bid
    4 bids

    Please check the attached files below. I need it ASAP. Thank you very much

    £13 (Avg Bid)
    £13 Avg Bid
    8 bids

    Recorder Firmware Requirements Following are requirements for SW/FW development for an audio recorder. Should be designed by an STM32 embedded firmware engineer with experience in audio. Hardware specifications ● Microprocessor - STM32F4 series (end product will preferably use STM32F423CH) ● Flash memory - eMMC with SDIO interface ● File system: same as modern SD Cards (Max file size can be >...

    £1644 (Avg Bid)
    £1644 Avg Bid
    12 bids

    Hi all freelancers! I am working on a project of creating a headset from scratch, and I am looking for someone with experience with PCBA for headsets with bluetooth, active noise cancelation, mini-jack input, MEMS mics, electret mics, USB-C input, Led Lighting, Battery and multi-functional buttons. As mentioned in the tittel I need a PCBA, and would need the Gerber file and BoM. Thanks in adv...

    £130 (Avg Bid)
    £130 Avg Bid
    10 bids

    I am looking for a final year (B-tech) project on Modelling of energy harvesting, the modelling should preferably be done on valid data and if possible related to some MEMS applications. I would also welcome ideas from your end to develop the project. some topics to explore are given

    £1423 (Avg Bid)
    £1423 Avg Bid
    1 bids

    Hello, We are looking for an engineer / team to complete a project for us. This is a power electronics system, already developed, in its last stage of development before production. This project has a software and hardware. Both have to be worked on together. MCU is an 8 bit Microchip Attiny1616. Hardware: We need to add a new technical feature (vibration detection) and correct some issue...

    £1405 (Avg Bid)
    £1405 Avg Bid
    4 bids

    I have a MEMS component for vibration measurement, MPU-6050 sensor (pic 1), which I want to use as a single-axis vibbration sensor. I have also got the interface for arduino coding, namely UNO R3 CH340G MEGA328P Chip 16Mhz ATMEGA328P-AU, (pic 2). Mission: 1. Code one sensor for picking up vibration for futher processing and analysis. 2. Coding for 4 sensors used in a specified configuration so tha...

    £165 (Avg Bid)
    £165 Avg Bid
    21 bids

    Hello, We are looking for an engineer / team to complete a project for us. This is a power electronics system, already developed, in its last stage of development before production. This project has a software and hardware. Both have to be worked on together. MCU is an 8 bit Microchip Attiny1616. Hardware: We need to add a new technical feature (vibration detection) and correct some issue...

    £859 (Avg Bid)
    £859 Avg Bid
    13 bids

    We want to get the design of a simple audio input/output peripheral device targeting speech applications. The key elements of the design are a simple PCB with 6 surface mount MEMS microphones, one small loudspeaker, and electronics to perform A/D conversion on the 6 microphone streams and connect them to a USB 2.0 port, plus to take an output audio stream from USB, convert to analog and drive a s...

    £129 (Avg Bid)
    £129 Avg Bid
    11 bids

    Building real- time embedded hardware & software for Unmanned Drone Systems. Excellent Coder (C/ C++/JAVA/Python). Familiarity with 8051/ AVR/ ARM/ Micro Controllers, RTOS, MEMS Sensors. Experience in programming hardware interfaces such as USB, I2C, UART, SPI, CAN. Experience in data filtering techniques. Experience in Flight Controller Board Designing. Experience in Circuit Designin

    £320 (Avg Bid)
    £320 Avg Bid
    3 bids

    A standard literature review well referenced on MEMS and determining wind wave height. Less than 5 percent plagiarism Analysing the MEMS signals, DSP filtering. A well explained python code to calculate wind wave height as well as to visualise the data from a database I need to be able to call and you must deliver the work in 2 days maximum

    £420 (Avg Bid)
    £420 Avg Bid
    22 bids

    I would like to develop an application for iPhone where I can read the raw acceleration data from the iPhone MEMS accelerometer (x,y,z and Rx,Ry,Rz) (similar to vibsensor® and seismometer® applications). The program will cluster the acceleration for each certain period (for example the user will specify 1sec period so the program will record the acceleration for each 1 sec). Each signal (e...

    £457 (Avg Bid)
    £457 Avg Bid
    22 bids

    i need 2 GIF and 2 MEMS by End of The Day. upon ur confirmation i will describe on what fundamentals you are suppose to do this.

    £7 (Avg Bid)
    £7 Avg Bid
    5 bids

    I need an iPhone app. I would like it designed and built.

    £11 / hr (Avg Bid)
    £11 / hr Avg Bid
    2 bids

    Hello, We are looking for an engineer / team to complete a project for us. This is a power electronics system, already developed, in its last stage before production. We need to add a new feature and correct some issues. We need to develop an accelerometer system (based on part similar to MEMS sensor LIS2HH12 from ST), correct some bugs on the PCB (high level of noise) and finalize the firmwa...

    £931 (Avg Bid)
    £931 Avg Bid
    24 bids

    Hi Julian A., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I am looking for help defining the use of a 4 channel 24bit ADC. I have various MEMS sensors that will feed into the part and need a clear development "road map" that defines the various settings of the part, including filters and optimal methods to drive down noise. I set ...

    £11 / hr (Avg Bid)
    £11 / hr Avg Bid
    1 bids

    I am looking for someone with experience with Nordic nRF52832, LIS3DH, fingerprint, proximity, and algorithm. Main Electronic components of device: - Raytac’s BLE 5 Module based on Nordic nRF52832 (see attachment for more details) - ARM Cortex – M4F processor -LIS3DH 3-axis MEMS accelerometer _ fingerprint module [login to view URL] Milestones will be as follow : 1. integrating f...

    £776 (Avg Bid)
    £776 Avg Bid
    19 bids

    expert on comsol required who can simulate a mems based gas sensor using a ZnO based schottky diode

    £103 (Avg Bid)
    £103 Avg Bid
    2 bids

    I am looking for someone with experience with Nordic nRF52832, LIS3DH, fingerprint, digital Keypad for door entry password, proximity, and algorithm. Main Electronic components of device: - Raytac’s BLE 5 Module based on Nordic nRF52832 (see attachment for more details) - ARM Cortex – M4F processor -LIS3DH 3-axis MEMS accelerometer Milestones will be as follow : 1. integrating fin...

    £801 (Avg Bid)
    £801 Avg Bid
    17 bids

    I have a ESP32 and a mems microphone. I want to connect the Mems microphone to the ESP32 and have it record audio files onto the sd card built into the esp32 module :) Let me know if you can help more with this. Thanks

    £26 (Avg Bid)
    £26 Avg Bid
    3 bids

    i have a pcb with mems sensor on it i want to keep it at 150 degree celcius for half an hour. how to do it without damaging it.

    £97 (Avg Bid)
    Local
    £97 Avg Bid
    7 bids

    A Raspberry PI software [login to view URL] to be developed which includes the connection of the PI to 2 chips adxl 355. the following specifications are to be achieved: Here are the specs what need to be achieved:  60ug/Sqrt(Hz) up to 50Hz  100 samples [login to view URL] for each channel  108dB dynamic range  3 axial MEMS accelerometer ADXL 355  [login to view UR...

    £1103 (Avg Bid)
    £1103 Avg Bid
    13 bids

    For mini project I need compact IMU system. this system including the MEMS sensor (MPU6050 or BMI 160) for findouting the acceleration and degree of ratation. if anyone interested we can discuss clearly. sufficient amount LL be paid. Read Less

    £94 (Avg Bid)
    £94 Avg Bid
    14 bids

    For mini project I need compact IMU system. this system including the MEMS sensor (MPU6050 or BMI 160) for findouting the acceleration and degree of ratation. if anyone interested we can discuss clearly. sufficient amount LL be paid.

    £2536 (Avg Bid)
    £2536 Avg Bid
    5 bids

    What I am looking for is a skeleton of a firmware for a Nordic NRF52 device. The firmware should: On boot, sets up the pins and peripherals. Has functions to read/write I2C data to/from the IR Thermometer, Heart Rate & Pulse, Accelerometer, Gyro, Compass, ECG Clock, and Battery Charger. Has functions to read/write 4-wire SPI to/from the ECG sensor Has functions to read I2S dat...

    £752 (Avg Bid)
    £752 Avg Bid
    5 bids

    well already have site but working on it independently need help with upgrading it , like the front page would like more animation or effects like me talking or pulling mems out a cloud or doing a video and sending it to you and you adding effects i do not know , but more effects and dazzle and helping me to direct people to my other links separately from my website if there looking for funding th...

    £107 (Avg Bid)
    £107 Avg Bid
    26 bids