3D Model for 3D Printing - Game of Thrones House Sigils and Lettering

Status: Closed
Prize: $200
Entries Received: 11
Winner: Blackhawkx

Winner

Contest Brief

Hi,
I am looking for a person to create a 3D model of some Game of Thrones house sigils and lettering.

So anyone reading this can better visualize what I have in mind, I'll explain their exact purpose. Basically I have a Game of Thrones 3D Map of Westeros, for which I created a thick wooden base, for it to rest on, and a glass dome, to cover the map (see "Game of Thrones Map.jpg"). The wooden base looks a bit plain, so I would like to get the words 'Game of Thrones' embossed on the front side (in the middle), and two house sigils on either side of the words. I would like 3D models of each of the above so I can get them 3D printed in high detail stainless steel (link below). I will then painted them and fix them to the wood.

Material Link: https://i.materialise.com/3d-printing-materials/high-detail-stainless-steel

So, to summarize, there are 5 different elements, for which I need a separate model/file for each. These are:
->The words "Game of Thrones" in the font they usual use (See "Game Of Thrones Font.jpg").
-----Maximum dimensions: Height=7cm; Width=39cm; Depth = 0.75cm.
->The House Stark sigil (See "House Stark Sigil.jpg").
-----Maximum dimensions: Height = 7cm; Width = 7cm; Depth = 0.75cm.
->The House Targaryen sigil (See "House Targaryen Sigil.jpg").
-----Maximum dimensions: Height = 7cm; Width = 7cm; Depth = 0.75cm.
->The House Baratheon sigil (See "House Baratheon Sigil.jpg").
-----Maximum dimensions: Height = 7cm; Width = 7cm; Depth = 0.75cm.
->The House Lannister sigil (See "House Lannister Sigil.jpg").
-----Maximum dimensions: Height = 7cm; Width = 7cm; Depth = 0.75cm.

All 5 elements need to be drawn in 3D, and have a 'textured' feel to them.

NOTE: I must stress that the lettering and the sigils need to be textured and feel 3D! The more detail the higher the chance of winning this competition!

NOTE: Also, please note that the dimensions given are the maximum size each individual element should be. It is important that you do not exceed any of the dimensions, and also please make sure that the sigils are exactly the same size.

NOTE: The "Game of Thrones" letters can be designed individually or as a whole piece. The most accurate (to the original font) submissions will have the highest chance of winning the contest!

NOTE: The images of the sigils provided are only for reference and not to be followed exactly. I would like the designs to remain true and accurate to the series, however feel free to add or leave out house names or mottos and play around with the actual shape of the design. Creativity will be rewarded!

Finally, whoever wins this contest will be required to submit individual files for all 5 elements mentioned above. The formats submitted must enable me to view the 3D drawing, and 3D print the object. Thus, all formats that will allow me to see the 3D model, and send it to a 3D printing company for printing shall be valid.

Thanks to everyone who read this. Looking forward to seeing all your designs!

Valar Morghulis,
Erik :)

UPDATE: Please note that entries submitted in colour will be preferred.

UPDATE: Updated the briefing to say that any formats will be allowed, as long as they serve the stated purposes.

UPDATE: Added 3D printing material and link.

UPDATE: Reduced maximum thickness of objects.

Recommended Skills

Winner

Post a Contest Like This

Employer Feedback

“Blackhawkx created 5 fantastic 3D models for me. His attention to detail and professionalism was very appreciated! Will definitely hire him again for any 3D designs I need :)”

erik555, Malta.

Public Clarification Board

VyacheslavGor
- 8 years ago
This them finushed? Or i can worked ?
- 8 years ago
1. Contest Holder
  - 8 years ago
  I've already chosen a winner for the contest sorry!
  - 8 years ago
ThreeDeeTitan
- 8 years ago
Please check #12 and read the comment, thank you :)
- 8 years ago
1. Contest Holder
  - 8 years ago
  Hi ThreeDee Titan :)
  Thank you very much for your comment! I didn't realise there was a size limitation and have decided to go with another 3D printing company instead. Your submission is also very nice, however, not exactly what I was looking for.
  Thanks again for your submission and help,
  Erik :)
  - 8 years ago
ziggah
- 8 years ago
Every time I enter a competition, the winner gets elected before I even get a chance to post mine.
- 8 years ago
1. ThreeDeeTitan
  - 8 years ago
  I know the feeling :)
  - 8 years ago
lntpmpjvqt
- 8 years ago
I'm preparing something far more better than that winning work, suddenly the contest is over before a whole week !!!
- 8 years ago
1. ThreeDeeTitan
  - 8 years ago
  Same here :/
  - 8 years ago
Blackhawkx
- 8 years ago
please check #9
- 8 years ago
Blackhawkx
- 8 years ago
PLZ CHECK #8
- 8 years ago
Blackhawkx
- 8 years ago
please check #6 ,thanks
- 8 years ago
1. Contest Holder
  - 8 years ago
  Just left feedback :)
  - 8 years ago
2. Blackhawkx
  - 8 years ago
  Thanks:)
  - 8 years ago
Blackhawkx
- 8 years ago
plz check #7 ,thanks
- 8 years ago
1. Contest Holder
  - 8 years ago
  Just left feedback :)
  - 8 years ago
Contest Holder
- 8 years ago
Hello everyone,

I am sorry to announce that I will be closing this contest early. Since the level of participation hasn't been as high as expected, and also because one person's submissions have already been exactly what I wanted, I do not wish to waste any more of your time. I will leave a few hours before I close the contest just in case anyone wishes to submit something they've already finished.

I hope none of you are angered by this decision, but since I've already found exactly what I want I didn't think it would be right to waste more time, mine or yours.

Thank you for all the interest and work,
Erik :)
- 8 years ago
lntpmpjvqt
- 8 years ago
Hi, about the "Game of Thrones" text, you want it to be designed with maximum dimensions of: Height=7cm; Width=39cm. As I saw, it can't fit both height & width as provided at the same time, so I guess I'll stick to the 39 cm, leaving the height to be less than 7cm. to be exact, it's 4.76 height & 39 cm width.
If I stick to the 7cm height, the width will be 57.3 cm !
I thought this is a missed point, so I tried to mention it and know what you think.
- 8 years ago
1. Contest Holder
  - 8 years ago
  Hi,
  Yes you're right! I provided those dimensions to serve as the maximum that you should work within. It doesn't matter if it's smaller but it can't exceed those dimensions!
  Thanks,
  Erik :)
  - 8 years ago
titusdrake
- 8 years ago
Hi. Please review #5. Thank you!
- 8 years ago
1. Contest Holder
  - 8 years ago
  Just left you feedback :)
  - 8 years ago
Blackhawkx
- 8 years ago
Please check #4 Thanks
- 8 years ago
1. Contest Holder
  - 8 years ago
  Just left you feedback :)
  - 8 years ago
javiermejiaki
- 8 years ago
working..........
- 8 years ago
1. Contest Holder
  - 8 years ago
  Looking forward to see your design!
  - 8 years ago
Blackhawkx
- 8 years ago
please check #3 ,thanks
- 8 years ago
1. Contest Holder
  - 8 years ago
  Just left you feedback :)
  - 8 years ago
ilcorsaro92
- 8 years ago
Hi, Please check #2 and leave us a feedback :D
- 8 years ago
1. Contest Holder
  - 8 years ago
  Just left you feedback :)
  - 8 years ago
Blackhawkx
- 8 years ago
please check #1 :)
- 8 years ago
View 1 more message
1. Blackhawkx
  - 8 years ago
  Thanks!
  - 8 years ago
2. Contest Holder
  - 8 years ago
  Left you additional comments :)
  - 8 years ago
Contest Holder
- 8 years ago
UPDATE: Reduced maximum thickness of objects from 1.5cm to 0.75cm.
Sorry if this is an inconvenience to anyone who has already started working on the models, however we realized that 1.5cm was way too thick and would ugly!
Thanks,
Erik :)
- 8 years ago
Contest Holder
- 8 years ago
Updated the contest brief to show the material that I will use to 3D print the object :)
- 8 years ago
turned2ice
- 8 years ago
Can you please say for what do you need the .CAD files? Its hard for me to imagine the possibility of such modeling and texturing in AutoCAD. Or am I missing something?
- 8 years ago
View 1 more message
1. turned2ice
  - 8 years ago
  Thank you for response, sure that .STL is the best way for 3d printing
  About viewing the models, there is nice service sketchfab.com
  an example, just to show you:
  https://sketchfab.com/models/e52433575c004ebe922817d33af28d3d
  - 8 years ago
2. Contest Holder
  - 8 years ago
  Thank you turned2ice!
  Still learning about the process, so you've been very helpful! :)
  Thanks again,
  Erik :)
  - 8 years ago
Contest Holder
- 8 years ago
Updated the brief to state that all formats which will allow me to view the 3D model and 3D print it will be accepted :)
- 8 years ago
vw6390141vw
- 8 years ago
HOW TO MAKE ->The House Baratheon sigil (See "House Baratheon Sigil.jpg").
-----Maximum dimensions: Height = 7cm; Width = 7cm; Depth = 1.5cm.
AND IT'S DIAMETERS REQUIRED TO MAKE THE HEIGHT LARGER THAN WIDTH
- 8 years ago
1. Contest Holder
  - 8 years ago
  Hi,
  Thank you for your interest in this contest! The maximum dimensions I provided are the maximum that the object can be. I am aware that the House Baratheon sigil is taller than it is wide. As long as the height and width do not exceed 7cm it is good! For example if the sigil is 7cm heigh and 4cm wide it is good :)
  Looking forward to seeing your submission!
  Thanks,
  Erik :)
  - 8 years ago
Prashant Kumar
- 8 years ago
i can complete this work for you in 3 days if you will assign this job to me personally.
- 8 years ago
View 2 more messages
1. Blackhawkx
  - 8 years ago
  Valar Dohaeris :)
  - 8 years ago
2. Contest Holder
  - 8 years ago
  Sounds good Blackhawkx :) Looking forward to seeing your submission!
  - 8 years ago