Architectural design of small boutique hotel

  • Status: Closed
  • Prize: $250
  • Entries Received: 19
  • Winner: TARTdesign

Contest Brief

We have a vacation houses business in Oia village Santorini island Greece. Till now we rent two houses to tourists. You can have a look about our business and photos at our website at www.azaleahouses.com.
Last year we bought the property exactly next to the Azalea Houses property. Inside the new property exist a cave of about 60m2 that is currently under renovation. When we finish the renovation of the cave the two properties will look like the attached “Azalea Layout.pdf”. This is made according to the “New Cave 2D.dwg” is the 2D plan of the construction of the cave.
The “Azalea topo.dwg” is the total plan of the two properties before we start the construction of the new cave. You can see also various heights at the heights and point layers.
Inside these two properties land it’s allowed to construct new buildings. At the Azalea Houses property land, we can construct new 100m2 of buildings. At the new property land, we can construct new 115m2 of buildings. The areas buildings law is that only two floors are allowed (ground and first) with total height of 7.5m.
The ideal for us is to build 3 or 4 more houses about 50m2 with a small kitchen, bathroom and a bedroom. Also, we need:
1) a room for laundry and storage
2) Common pool area
3) Every new house should have a mini pool
4) Some ideas where to construct mini pools at Azalea Houses two old houses
I need some ideas about where is the best to construct the buildings and also some ideas about the common areas (swimming pool etc) of the buildings. Have a look at “New Cave 2D.dwg” ANOPSI layer for our preferred building location.
You must consider the sun route for less shading https://www.suncalc.org/ especially the full season months May-September. Also have a look at the heights of the front public street.
You will deliver a draft AutoCAD 2D file for your design and draft 3D render images and your Sketchup model file.

CONTEST UPDATE 06/03/2020
1) We have updated the “New Cave 2D.dwg” ANOPSI layer for our preferred building location. Please keep this location in your designs.

2) We have uploaded “Semi developed solution.rar”. This solution is from a previous contest winning entry. It has only 2 more new houses at the preferred building location with entrance from the front street. The ideal for us is to build 3 or 4 more houses.

3) We have uploaded “Exterior.rar” with photos of the properties from different views

4) We have uploaded “Front Street.rar” with photos of the properties front street from different views. At the “Azalea topo.dwg” is the topo plan of the two properties before we start the construction of the new cave. You can see also the heights at the heights and point layers. Have a look also at the “heights from topo.jpg”

5) At the Azalea Houses property land, we can construct maximum new 100m2 of buildings. At the new property land, we can construct maximum new 115m2 of buildings. The total height of 7.5m is from the front street lower point and different for every property land.

Recommended Skills

Winner
Featured Contest
Post a Contest Like This

Employer Feedback

“Really perfect job.”

Profile image nkourtis, Greece.

Top entries from this contest

View More Entries

Public Clarification Board

  • EstebanGreen
    EstebanGreen
    • 4 years ago

    #28

    • 4 years ago
  • EstebanGreen
    EstebanGreen
    • 4 years ago

    Any comments?

    • 4 years ago
  • EstebanGreen
    EstebanGreen
    • 4 years ago

    Any comments?

    • 4 years ago
  • YSirine
    YSirine
    • 4 years ago

    Almost finished....

    • 4 years ago
    1. nkourtis
      Contest Holder
      • 4 years ago

      Thanks

      • 4 years ago
  • monicagarces1
    monicagarces1
    • 4 years ago

    Hello, I hope you are very well!

    I model in AutoCAD, and render in 3D max, I can deliver drawings in AutoCAD and 3D modeling.
    But, render in 3D Max.
    Can I do it like this?

    Greetings!

    • 4 years ago
    1. nkourtis
      Contest Holder
      • 4 years ago

      No problem

      • 4 years ago
  • AC3Designe
    AC3Designe
    • 4 years ago

    hi please check the entry #23

    • 4 years ago
  • AC3Designe
    AC3Designe
    • 4 years ago

    hi please check the entry #22

    • 4 years ago
  • EstebanGreen
    EstebanGreen
    • 4 years ago

    Working...

    • 4 years ago
    1. nkourtis
      Contest Holder
      • 4 years ago

      Thanks

      • 4 years ago
  • ArqBelenLopez
    ArqBelenLopez
    • 4 years ago

    Hi! Really interesting project! Working on it!

    • 4 years ago
    1. nkourtis
      Contest Holder
      • 4 years ago

      Thanks

      • 4 years ago
  • nkourtis
    Contest Holder
    • 4 years ago

    Hello everyone. I have uploaded the rar files that have problem in zip format.

    • 4 years ago
    1. athamaulidya01
      athamaulidya01
      • 4 years ago

      Thank you very much

      • 4 years ago
  • nkourtis
    Contest Holder
    • 4 years ago

    Hello everyone. I have uploaded also new "New Cave 2D II.dwg . It has updated ANOPSI layer for our preferred new buildings location.

    • 4 years ago
    1. athamaulidya01
      athamaulidya01
      • 4 years ago

      Thank you very much

      • 4 years ago
  • nkourtis
    Contest Holder
    • 4 years ago

    Hallo everyone. I have updated the contest description and i have uploaded also new files. Please read the description carrefully.

    • 4 years ago
    1. aliwafaafif
      aliwafaafif
      • 4 years ago

      Dear Nikolaos, the RAR files could not be opened. Could you send them again? Or send the link in google drive or dropbox

      • 4 years ago
    2. nkourtis
      Contest Holder
      • 4 years ago

      Hi Ali. I use winrar and everything is ok. in which file do you have problem?

      • 4 years ago
  • nkourtis
    Contest Holder
    • 4 years ago

    Hello everyone. I have extend the contest and make it sealed also. I will update also the description also later today.

    • 4 years ago
    1. athamaulidya01
      athamaulidya01
      • 4 years ago

      Thankyou very much

      • 4 years ago
  • athamaulidya01
    athamaulidya01
    • 4 years ago

    Sorry, the 2D images in the files "Azalea topo 2013.dwg" and "New Cave 2D 2013.dwg" contain information about "Δημοτικός δρόμος μεταβλητού πλάτους" and "public walking road", which cuts the building, is that correct? and if true, does it mean that the area contained in the information cannot be built because it is a public road?

    • 4 years ago
    View 2 more messages Processing...
    1. athamaulidya01
      athamaulidya01
      • 4 years ago

      Whether the location of the new building to be built is in the description
      "Land limits (Azalea Houses property) Ε = 197.21m2"
      and "Land limits (new property) Ε = 136.68m2" ?

      • 4 years ago
    2. nkourtis
      Contest Holder
      • 4 years ago

      Have a look at “New Cave 2D.dwg” ANOPSI layer for our preferred new buildings location.

      • 4 years ago
  • chrisxukun
    chrisxukun
    • 4 years ago

    Hello, working on it, would you kindly extend the deadline?

    • 4 years ago
    View 1 more message Processing...
    1. chrisxukun
      chrisxukun
      • 4 years ago

      Thank you.Working now.

      • 4 years ago
    2. chrisxukun
      chrisxukun
      • 4 years ago

      Please extend the timeline, just start it, still need more time, thank you.

      • 4 years ago
  • TARTdesign
    TARTdesign
    • 4 years ago

    I appreciate it if you do not close this contest before the stated deadline. This project is really fun to work to! thank you, cheers!

    • 4 years ago
  • triaramadhani34
    triaramadhani34
    • 4 years ago

    working

    • 4 years ago
    1. nkourtis
      Contest Holder
      • 4 years ago

      Thanks

      • 4 years ago
  • athamaulidya01
    athamaulidya01
    • 4 years ago

    Working

    • 4 years ago
    1. nkourtis
      Contest Holder
      • 4 years ago

      Thanks

      • 4 years ago
  • saleemshaheen646
    saleemshaheen646
    • 4 years ago

    Hello, please attach the dwg files in Autocad 2017 version

    • 4 years ago
    1. nkourtis
      Contest Holder
      • 4 years ago

      Hi Saleem. I upload in 2013 version

      • 4 years ago
  • TARTdesign
    TARTdesign
    • 4 years ago

    Yes, I have seen the CAD files and the ANOPSI layer. What I mean is, should we design it below the street level (underground cave) or raised above ground 2 floors? Because if it is raised 2 floors, it will block the view from the street and also from the existing azalea suite

    • 4 years ago
    1. nkourtis
      Contest Holder
      • 4 years ago

      Hi Raka. Have a look at the heights layer. The front small street has different heights

      • 4 years ago
  • cgjr96
    cgjr96
    • 4 years ago

    please check my entry #4 please

    • 4 years ago
    View 2 more messages Processing...
    1. nkourtis
      Contest Holder
      • 4 years ago

      Hi Roberto. You must read the description of the contest. The interior design of the cave is in another contest.

      • 4 years ago
    2. nkourtis
      Contest Holder
      • 4 years ago

      In this contest I need all the buildings exteriors raised in 3d

      • 4 years ago
  • TARTdesign
    TARTdesign
    • 4 years ago

    Hello Contest Holder. I have a few questions in mind.
    1. Is it possible for you to upload the existing 3D file of your current property as shown in the "Azalea Layout" file? It would be easier and faster to work on
    2. Does the new houses you plan to design removes the current plants' terrace of the Azalea property and the terrace of the new property?
    3. Is there anything located underneath the plant terrace of the Azalea property and is it possible to build anything in that space?
    Thank you, after you answer these questions, I will get to work and finish it ASAP. Cheers!

    • 4 years ago
    1. nkourtis
      Contest Holder
      • 4 years ago

      1. Sorry i dont have the existing 3D file of your current property as shown in the "Azalea Layout" file

      • 4 years ago
    2. nkourtis
      Contest Holder
      • 4 years ago

      2, 3. Have a look at “New Cave 2D.dwg” ANOPSI layer for our preferred buildings location.

      • 4 years ago
  • Macplane
    Macplane
    • 4 years ago

    Dear Sir / Madam, which drafts you need exactly ? SketchUp drafts ? Not rendered ?

    • 4 years ago
    1. nkourtis
      Contest Holder
      • 4 years ago

      Hi Mclacplane. We need to see ideas for the new buildings. Anything would be fine.

      • 4 years ago
  • reyojy
    reyojy
    • 4 years ago

    working

    • 4 years ago
    1. nkourtis
      Contest Holder
      • 4 years ago

      Thanks

      • 4 years ago
  • TARTdesign
    TARTdesign
    • 4 years ago

    Hello, I would like to ask. Is this contest the same as the "Interior design of a cave house"?

    • 4 years ago
    1. nkourtis
      Contest Holder
      • 4 years ago

      No. Have a look at the descriptions.

      • 4 years ago
    2. TARTdesign
      TARTdesign
      • 4 years ago

      Ah, yes understood. I will be working on this, I appreciate if you do not close the contest before the stated deadline. Thank you, cheers!

      • 4 years ago

Show more comments

How to get started with contests

  • Post your contest

    Post Your Contest Quick and easy

  • Get tons of entries

    Get Tons of Entries From around the world

  • Award the best entry

    Award the best entry Download the files - Easy!

Post a Contest Now or Join us Today!